You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
129 lines
4.2 KiB
129 lines
4.2 KiB
# BUTCube
|
|
Modules:
|
|
- Solar panels (XY, Z) (not in stack)
|
|
- EPS
|
|
- Flight Computer
|
|
- Mission computer
|
|
- Communication
|
|
- Sun sensor module (not in stack)
|
|
- ? Attitude control
|
|
- Access port module (not in stack)
|
|
|
|
# Solar panels
|
|
|
|
## Solar cells
|
|
#### SM141K04L
|
|
- Link: https://www.digikey.nl/short/fvpwbf4h
|
|
- Panel count: 8 (2S 4P)
|
|
- Maximal power: 0.98 W
|
|
- Voltage: 4.46 V (MPPT)
|
|
- Dimensions: 29 x 23 mm
|
|
- Weight: 3g (24g)
|
|
- Price (for 1 side): 28 € (750 CZK)
|
|
|
|
#### SM141K04LV
|
|
- Link: https://www.digikey.cz/short/r589mmbj
|
|
- Panel count: 8 (2S 4P)
|
|
- Maximal power: 0.98 W
|
|
- Voltage: 4.46 V (MPPT)
|
|
- Dimensions: 45 x 15 mm
|
|
- Weight: 2.5g (20g)
|
|
- Price (for 1 side): 28 € (750 CZK)
|
|
|
|
## Solar module
|
|
- Two sizes of solar panel PCBs
|
|
- Z - 100x100 mm with cutouts in corners for rails
|
|
- X,Y - 100x83
|
|
- In center of module is hole for another module
|
|
- Approximate size of module is 46x30 mm
|
|
- Mounting to frame is via 4 bolts in corners of board
|
|
- Integrated components: Optodiode, temperature measuring IC
|
|
|
|
## Sensors
|
|
- Temperature sensor: AT30TS74
|
|
- Photo diode:
|
|
- VEMD5510C - 550nm (450-750) - visible
|
|
- VEMD5060X - 800nm (500-1000) - visible + IR
|
|
- VEMD5160X - 850nm (750-950) - IR (used)
|
|
- ADC for photodiode: ADS7142
|
|
|
|
# Cables
|
|
- https://www.digikey.cz/product-detail/en/adafruit-industries-llc/3165/1528-1733-ND/6193585
|
|
- https://www.digikey.cz/product-detail/en/adafruit-industries-llc/3167/1528-1735-ND/6193587
|
|
- https://www.digikey.cz/product-detail/en/adafruit-industries-llc/3168/1528-1736-ND/6193588
|
|
- https://www.digikey.cz/product-detail/en/adafruit-industries-llc/3164/1528-1732-ND/6193584
|
|
|
|
- 30AWG resistance 0.3R per meter
|
|
- Length in CubeSat cca 10-15 cm
|
|
- Power loss in cables is 0.5mW in peek (0.05% per solar module)
|
|
- Similar power loss will be at cable connectors
|
|
|
|
# Stack connector
|
|
- [https://cz.mouser.com/ProductDetail/200-SSQ12002TD]
|
|
- 2x20 pins
|
|
- Limits board to thickness of 1mm or less
|
|
- Board spacing: 8.51 mm
|
|
|
|
# EPS
|
|
- Two identical modules on one board
|
|
- Both connected to stack connector
|
|
- Other board could be connected to both or one of then
|
|
- Power oring must be solved
|
|
- Connected to main CAN
|
|
|
|
## Power output
|
|
- 3 regulated and monitored power rails - 1V8, 3V3, 5V
|
|
- Output regulator - TPS63002DRCR
|
|
- 0.8A (boost) up to 1.2A (buck) output
|
|
- 2.2 uH coil
|
|
- 1 unregulated output of battery, monitored
|
|
- Monitoring via current sensors (INA??)
|
|
|
|
## Battery
|
|
- Limit for CubeSat is 50Wh
|
|
- Suggested battery has form factor 21700
|
|
- One battery per EPS
|
|
- Battery is mounted in battery holder
|
|
- Keystone 1122 - 1122
|
|
- Probably additional fixation is requested
|
|
- Selected battery - https://www.conrad.cz/p/samsung-inr21700-50e-specialni-akumulator-21700-flat-top-li-ion-akumulator-36-v-4900-mah-2114678
|
|
- 3.6V, 4900mAh, 17.64Wh
|
|
- EPS module has around 35Wh (well in limit)
|
|
|
|
## Battery heating
|
|
- https://www.ges.cz/cz/odl-20r81-GES06914579.html
|
|
- https://www.ges.cz/cz/odl-53r1-GES06914581.html
|
|
- https://www.gme.cz/odporovy-drat-odp-kan02-3m
|
|
- https://www.gme.cz/odporovy-drat-odp-kon03-3m
|
|
|
|
- Heating should be designed for power around 1-4W
|
|
- With 5.4R/m and battery input source (3.7V) length of wire for 2W heating should be around 1.2m (current 0.5A)
|
|
- 0.5A is probably to much, values around 0.2A are better -> 1W heating
|
|
- For regulation could be used power switch with constant current regulation
|
|
|
|
# Access port module
|
|
Connectors:
|
|
- USB-C
|
|
- data connected to mission computer or flight computer
|
|
- power connected to EPS for battery charging
|
|
- 2x SWD port for programing and debugging of Flight and Mission computer
|
|
- main CAN bus connector
|
|
- UART debug port
|
|
|
|
- Realized as stack of two PCB boards
|
|
- Front acts only as cover for connectors
|
|
- Connectors are mounted on rear board
|
|
- Connectors are accessible via cutouts in frontz board
|
|
- Rear board is mounted to front via column spacers
|
|
|
|
# Other parts:
|
|
- LTC4415 - Dual ideal diode with ORing
|
|
- MAX16171 - Ideal Diode Controller with Reverse-Current Protection
|
|
- BQ25798 - solar battery charger with dual-input selector and MPPT, I2C, https://www.ti.com/product/BQ25798
|
|
- BAT54W-G - Low drop shottky diode, solar blocking diode
|
|
- BQ27421YZFT-G1A - Fuel gauge
|
|
|
|
# Digikey orders
|
|
https://www.digikey.cz/short/8nmn4tr3
|
|
https://www.digikey.cz/short/d4n94tbz
|