Error in makefile

Firmware/Core/tinyusb/examples/device/99-tinyusb.rules

@@ -0,0 +1,21 @@
+# Copy this file to the location of your distribution's udev rules, for example on Ubuntu:
+#   sudo cp 99-tinyusb.rules /etc/udev/rules.d/
+# Then reload udev configuration by executing:
+#   sudo udevadm control --reload-rules
+#   sudo udevadm trigger
+
+# Check SUBSYSTEM
+SUBSYSTEMS=="hidraw", KERNEL=="hidraw*", MODE="0666", GROUP="dialout"
+
+# Rule applies to all TinyUSB example
+ATTRS{idVendor}=="cafe", MODE="0666", GROUP="dialout"
+
+# Rule to blacklist TinyUSB example from being manipulated by ModemManager.
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="cafe", ENV{ID_MM_DEVICE_IGNORE}="1"
+
+# Xplained Pro SamG55 Device
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2111", MODE="0666", GROUP="users", ENV{ID_MM_DEVICE_IGNORE}="1"
+SUBSYSTEMS=="tty", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2111", MODE="0666", GROUP="users", ENV{ID_MM_DEVICE_IGNORE}="1"
+
+# TI Stellaris/Tiva-C Launchpad ICDI
+SUBSYSTEM=="usb", ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="0666"

Firmware/Core/tinyusb/examples/device/CMakeLists.txt

@@ -0,0 +1,28 @@
+cmake_minimum_required(VERSION 3.5)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake)
+
+project(tinyusb_device_examples)
+family_initialize_project(tinyusb_device_examples ${CMAKE_CURRENT_LIST_DIR})
+
+# family_add_subdirectory will filter what to actually add based on selected FAMILY
+family_add_subdirectory(audio_4_channel_mic)
+family_add_subdirectory(audio_test)
+family_add_subdirectory(board_test)
+family_add_subdirectory(cdc_dual_ports)
+family_add_subdirectory(cdc_msc)
+family_add_subdirectory(cdc_msc_freertos)
+family_add_subdirectory(dfu)
+family_add_subdirectory(dfu_runtime)
+family_add_subdirectory(dynamic_configuration)
+family_add_subdirectory(hid_composite)
+family_add_subdirectory(hid_composite_freertos)
+family_add_subdirectory(hid_generic_inout)
+family_add_subdirectory(hid_multiple_interface)
+family_add_subdirectory(midi_test)
+family_add_subdirectory(msc_dual_lun)
+family_add_subdirectory(net_lwip_webserver)
+family_add_subdirectory(uac2_headset)
+family_add_subdirectory(usbtmc)
+family_add_subdirectory(video_capture)
+family_add_subdirectory(webusb_serial)

Firmware/Core/tinyusb/examples/device/audio_4_channel_mic/CMakeLists.txt

@@ -0,0 +1,28 @@
+cmake_minimum_required(VERSION 3.5)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT})
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
+)
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+  ${CMAKE_CURRENT_SOURCE_DIR}/src
+)
+
+# Configure compilation flags and libraries for the example... see the corresponding function
+# in hw/bsp/FAMILY/family.cmake for details.
+family_configure_device_example(${PROJECT})

Firmware/Core/tinyusb/examples/device/audio_4_channel_mic/Makefile

@@ -0,0 +1,12 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+INC += \
+  src \
+  $(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE += $(wildcard src/*.c)
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+include ../../rules.mk

Firmware/Core/tinyusb/examples/device/audio_4_channel_mic/skip.txt

@@ -0,0 +1,3 @@
+mcu:SAMD11
+mcu:SAME5X
+mcu:SAMG

Firmware/Core/tinyusb/examples/device/audio_4_channel_mic/src/main.c

@@ -0,0 +1,459 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Reinhard Panhuber
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+/* plot_audio_samples.py requires following modules:
+ * $ sudo apt install libportaudio
+ * $ pip3 install sounddevice matplotlib
+ *
+ * Then run
+ * $ python3 plot_audio_samples.py
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+
+#ifndef AUDIO_SAMPLE_RATE
+#define AUDIO_SAMPLE_RATE   48000
+#endif
+
+/* Blink pattern
+ * - 250 ms  : device not mounted
+ * - 1000 ms : device mounted
+ * - 2500 ms : device is suspended
+ */
+enum  {
+  BLINK_NOT_MOUNTED = 250,
+  BLINK_MOUNTED = 1000,
+  BLINK_SUSPENDED = 2500,
+};
+
+static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
+
+// Audio controls
+// Current states
+bool mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; 				          // +1 for master channel 0
+uint16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; 					// +1 for master channel 0
+uint32_t sampFreq;
+uint8_t clkValid;
+
+// Range states
+audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX+1]; 			// Volume range state
+audio_control_range_4_n_t(1) sampleFreqRng; 						// Sample frequency range state
+
+// Audio test data
+uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ/2];   // Ensure half word aligned
+
+void led_blinking_task(void);
+void audio_task(void);
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+  board_init();
+
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
+
+  // Init values
+  sampFreq = AUDIO_SAMPLE_RATE;
+  clkValid = 1;
+
+  sampleFreqRng.wNumSubRanges = 1;
+  sampleFreqRng.subrange[0].bMin = AUDIO_SAMPLE_RATE;
+  sampleFreqRng.subrange[0].bMax = AUDIO_SAMPLE_RATE;
+  sampleFreqRng.subrange[0].bRes = 0;
+
+  while (1)
+  {
+    tud_task(); // tinyusb device task
+    led_blinking_task();
+    audio_task();
+  }
+
+
+  return 0;
+}
+
+//--------------------------------------------------------------------+
+// Device callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when device is mounted
+void tud_mount_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+// Invoked when device is unmounted
+void tud_umount_cb(void)
+{
+  blink_interval_ms = BLINK_NOT_MOUNTED;
+}
+
+// Invoked when usb bus is suspended
+// remote_wakeup_en : if host allow us  to perform remote wakeup
+// Within 7ms, device must draw an average of current less than 2.5 mA from bus
+void tud_suspend_cb(bool remote_wakeup_en)
+{
+  (void) remote_wakeup_en;
+  blink_interval_ms = BLINK_SUSPENDED;
+}
+
+// Invoked when usb bus is resumed
+void tud_resume_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+//--------------------------------------------------------------------+
+// AUDIO Task
+//--------------------------------------------------------------------+
+
+void audio_task(void)
+{
+  // Yet to be filled - e.g. put meas data into TX FIFOs etc.
+  // asm("nop");
+}
+
+//--------------------------------------------------------------------+
+// Application Callback API Implementations
+//--------------------------------------------------------------------+
+
+// Invoked when audio class specific set request received for an EP
+bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff)
+{
+  (void) rhport;
+  (void) pBuff;
+
+  // We do not support any set range requests here, only current value requests
+  TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR);
+
+  // Page 91 in UAC2 specification
+  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
+  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
+  uint8_t ep = TU_U16_LOW(p_request->wIndex);
+
+  (void) channelNum; (void) ctrlSel; (void) ep;
+
+  return false; 	// Yet not implemented
+}
+
+// Invoked when audio class specific set request received for an interface
+bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff)
+{
+  (void) rhport;
+  (void) pBuff;
+
+  // We do not support any set range requests here, only current value requests
+  TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR);
+
+  // Page 91 in UAC2 specification
+  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
+  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
+  uint8_t itf = TU_U16_LOW(p_request->wIndex);
+
+  (void) channelNum; (void) ctrlSel; (void) itf;
+
+  return false; 	// Yet not implemented
+}
+
+// Invoked when audio class specific set request received for an entity
+bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff)
+{
+  (void) rhport;
+
+  // Page 91 in UAC2 specification
+  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
+  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
+  uint8_t itf = TU_U16_LOW(p_request->wIndex);
+  uint8_t entityID = TU_U16_HIGH(p_request->wIndex);
+
+  (void) itf;
+
+  // We do not support any set range requests here, only current value requests
+  TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR);
+
+  // If request is for our feature unit
+  if ( entityID == 2 )
+  {
+    switch ( ctrlSel )
+    {
+      case AUDIO_FU_CTRL_MUTE:
+        // Request uses format layout 1
+        TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_1_t));
+
+        mute[channelNum] = ((audio_control_cur_1_t*) pBuff)->bCur;
+
+        TU_LOG2("    Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum);
+      return true;
+
+      case AUDIO_FU_CTRL_VOLUME:
+        // Request uses format layout 2
+        TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t));
+
+        volume[channelNum] = (uint16_t) ((audio_control_cur_2_t*) pBuff)->bCur;
+
+        TU_LOG2("    Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum);
+      return true;
+
+        // Unknown/Unsupported control
+      default:
+        TU_BREAKPOINT();
+      return false;
+    }
+  }
+  return false;    // Yet not implemented
+}
+
+// Invoked when audio class specific get request received for an EP
+bool tud_audio_get_req_ep_cb(uint8_t rhport, tusb_control_request_t const * p_request)
+{
+  (void) rhport;
+
+  // Page 91 in UAC2 specification
+  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
+  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
+  uint8_t ep = TU_U16_LOW(p_request->wIndex);
+
+  (void) channelNum; (void) ctrlSel; (void) ep;
+
+  //	return tud_control_xfer(rhport, p_request, &tmp, 1);
+
+  return false; 	// Yet not implemented
+}
+
+// Invoked when audio class specific get request received for an interface
+bool tud_audio_get_req_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request)
+{
+  (void) rhport;
+
+  // Page 91 in UAC2 specification
+  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
+  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
+  uint8_t itf = TU_U16_LOW(p_request->wIndex);
+
+  (void) channelNum; (void) ctrlSel; (void) itf;
+
+  return false; 	// Yet not implemented
+}
+
+// Invoked when audio class specific get request received for an entity
+bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const * p_request)
+{
+  (void) rhport;
+
+  // Page 91 in UAC2 specification
+  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
+  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
+  // uint8_t itf = TU_U16_LOW(p_request->wIndex); 			// Since we have only one audio function implemented, we do not need the itf value
+  uint8_t entityID = TU_U16_HIGH(p_request->wIndex);
+
+  // Input terminal (Microphone input)
+  if (entityID == 1)
+  {
+    switch ( ctrlSel )
+    {
+      case AUDIO_TE_CTRL_CONNECTOR:
+      {
+        // The terminal connector control only has a get request with only the CUR attribute.
+        audio_desc_channel_cluster_t ret;
+
+        // Those are dummy values for now
+        ret.bNrChannels = 1;
+        ret.bmChannelConfig = 0;
+        ret.iChannelNames = 0;
+
+        TU_LOG2("    Get terminal connector\r\n");
+
+        return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, (void*) &ret, sizeof(ret));
+      }
+      break;
+
+        // Unknown/Unsupported control selector
+      default:
+        TU_BREAKPOINT();
+        return false;
+    }
+  }
+
+  // Feature unit
+  if (entityID == 2)
+  {
+    switch ( ctrlSel )
+    {
+      case AUDIO_FU_CTRL_MUTE:
+        // Audio control mute cur parameter block consists of only one byte - we thus can send it right away
+        // There does not exist a range parameter block for mute
+        TU_LOG2("    Get Mute of channel: %u\r\n", channelNum);
+        return tud_control_xfer(rhport, p_request, &mute[channelNum], 1);
+
+      case AUDIO_FU_CTRL_VOLUME:
+        switch ( p_request->bRequest )
+        {
+          case AUDIO_CS_REQ_CUR:
+            TU_LOG2("    Get Volume of channel: %u\r\n", channelNum);
+            return tud_control_xfer(rhport, p_request, &volume[channelNum], sizeof(volume[channelNum]));
+
+          case AUDIO_CS_REQ_RANGE:
+            TU_LOG2("    Get Volume range of channel: %u\r\n", channelNum);
+
+            // Copy values - only for testing - better is version below
+            audio_control_range_2_n_t(1)
+            ret;
+
+            ret.wNumSubRanges = 1;
+            ret.subrange[0].bMin = -90;           // -90 dB
+            ret.subrange[0].bMax = 90;		// +90 dB
+            ret.subrange[0].bRes = 1; 		// 1 dB steps
+
+            return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, (void*) &ret, sizeof(ret));
+
+            // Unknown/Unsupported control
+          default:
+            TU_BREAKPOINT();
+            return false;
+        }
+      break;
+
+        // Unknown/Unsupported control
+      default:
+        TU_BREAKPOINT();
+        return false;
+    }
+  }
+
+  // Clock Source unit
+  if ( entityID == 4 )
+  {
+    switch ( ctrlSel )
+    {
+      case AUDIO_CS_CTRL_SAM_FREQ:
+        // channelNum is always zero in this case
+        switch ( p_request->bRequest )
+        {
+          case AUDIO_CS_REQ_CUR:
+            TU_LOG2("    Get Sample Freq.\r\n");
+            return tud_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq));
+
+          case AUDIO_CS_REQ_RANGE:
+            TU_LOG2("    Get Sample Freq. range\r\n");
+            return tud_control_xfer(rhport, p_request, &sampleFreqRng, sizeof(sampleFreqRng));
+
+           // Unknown/Unsupported control
+          default:
+            TU_BREAKPOINT();
+            return false;
+        }
+      break;
+
+      case AUDIO_CS_CTRL_CLK_VALID:
+        // Only cur attribute exists for this request
+        TU_LOG2("    Get Sample Freq. valid\r\n");
+        return tud_control_xfer(rhport, p_request, &clkValid, sizeof(clkValid));
+
+      // Unknown/Unsupported control
+      default:
+        TU_BREAKPOINT();
+        return false;
+    }
+  }
+
+  TU_LOG2("  Unsupported entity: %d\r\n", entityID);
+  return false; 	// Yet not implemented
+}
+
+bool tud_audio_tx_done_pre_load_cb(uint8_t rhport, uint8_t itf, uint8_t ep_in, uint8_t cur_alt_setting)
+{
+  (void) rhport;
+  (void) itf;
+  (void) ep_in;
+  (void) cur_alt_setting;
+
+  for (uint8_t cnt=0; cnt < CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO; cnt++)
+  {
+    tud_audio_write_support_ff(cnt, i2s_dummy_buffer[cnt], AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX);
+  }
+
+  return true;
+}
+
+bool tud_audio_tx_done_post_load_cb(uint8_t rhport, uint16_t n_bytes_copied, uint8_t itf, uint8_t ep_in, uint8_t cur_alt_setting)
+{
+  (void) rhport;
+  (void) n_bytes_copied;
+  (void) itf;
+  (void) ep_in;
+  (void) cur_alt_setting;
+
+  uint16_t dataVal;
+
+  // Generate dummy data
+  for (uint16_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO; cnt++)
+  {
+    uint16_t * p_buff = i2s_dummy_buffer[cnt];              // 2 bytes per sample
+    dataVal = 1;
+    for (uint16_t cnt2 = 0; cnt2 < AUDIO_SAMPLE_RATE/1000; cnt2++)
+    {
+      for (uint8_t cnt3 = 0; cnt3 < CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX; cnt3++)
+      {
+        *p_buff++ = dataVal;
+      }
+      dataVal++;
+    }
+  }
+  return true;
+}
+
+bool tud_audio_set_itf_close_EP_cb(uint8_t rhport, tusb_control_request_t const * p_request)
+{
+  (void) rhport;
+  (void) p_request;
+
+  return true;
+}
+
+//--------------------------------------------------------------------+
+// BLINKING TASK
+//--------------------------------------------------------------------+
+void led_blinking_task(void)
+{
+  static uint32_t start_ms = 0;
+  static bool led_state = false;
+
+  // Blink every interval ms
+  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
+  start_ms += blink_interval_ms;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}

Firmware/Core/tinyusb/examples/device/audio_4_channel_mic/src/plot_audio_samples.py

@@ -0,0 +1,34 @@
+import sounddevice as sd
+import matplotlib.pyplot as plt
+import numpy as np
+import platform
+
+if __name__ == '__main__':
+
+    # If you got "ValueError: No input device matching", that is because your PC name example device
+    # differently from tested list below. Uncomment the next line to see full list and try to pick correct one
+    # print(sd.query_devices())
+
+    fs = 48000  		# Sample rate
+    duration = 100e-3   # Duration of recording
+
+    if platform.system() == 'Windows':
+        # WDM-KS is needed since there are more than one MicNode device APIs (at least in Windows)
+        device = 'Microphone (MicNode_4_Ch), Windows WDM-KS'
+    elif platform.system() == 'Darwin':
+        device = 'MicNode_4_Ch'
+    else:
+        device ='default'
+
+    myrecording = sd.rec(int(duration * fs), samplerate=fs, channels=4, dtype='int16', device=device)
+    print('Waiting...')
+    sd.wait()  # Wait until recording is finished
+    print('Done!')
+
+    time = np.arange(0, duration, 1 / fs)  # time vector
+    plt.plot(time, myrecording)
+    plt.xlabel('Time [s]')
+    plt.ylabel('Amplitude')
+    plt.title('MicNode 4 Channel')
+    plt.show()
+    

Firmware/Core/tinyusb/examples/device/audio_4_channel_mic/src/tusb_config.h

@@ -0,0 +1,129 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS               OPT_OS_NONE
+#endif
+
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG            0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED           1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED         BOARD_TUD_MAX_SPEED
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE    64
+#endif
+
+//------------- CLASS -------------//
+#define CFG_TUD_AUDIO             1
+#define CFG_TUD_CDC               0
+#define CFG_TUD_MSC               0
+#define CFG_TUD_HID               0
+#define CFG_TUD_MIDI              0
+#define CFG_TUD_VENDOR            0
+
+//--------------------------------------------------------------------
+// AUDIO CLASS DRIVER CONFIGURATION
+//--------------------------------------------------------------------
+
+// Have a look into audio_device.h for all configurations
+
+#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN                 TUD_AUDIO_MIC_FOUR_CH_DESC_LEN
+
+#define CFG_TUD_AUDIO_FUNC_1_N_AS_INT                 1
+#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ              64
+
+#define CFG_TUD_AUDIO_ENABLE_EP_IN                    1
+#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX    2         // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup
+#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX            4         // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup
+#define CFG_TUD_AUDIO_EP_SZ_IN                        (48 + 1) * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX      // 48 Samples (48 kHz) x 2 Bytes/Sample x CFG_TUD_AUDIO_N_CHANNELS_TX Channels - the Windows driver always needs an extra sample per channel of space more, otherwise it complains... found by trial and error
+#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX             CFG_TUD_AUDIO_EP_SZ_IN
+#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ          CFG_TUD_AUDIO_EP_SZ_IN
+
+#define CFG_TUD_AUDIO_ENABLE_ENCODING                 1
+#define CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING          1
+#define CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX      2         // One I2S stream contains two channels, each stream is saved within one support FIFO - this value is currently fixed, the driver does not support a changing value
+#define CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO        (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX)
+#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ       (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */

Firmware/Core/tinyusb/examples/device/audio_4_channel_mic/src/usb_descriptors.c

@@ -0,0 +1,165 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "tusb.h"
+
+/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
+ * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
+ *
+ * Auto ProductID layout's Bitmap:
+ *   [MSB]     AUDIO | MIDI | HID | MSC | CDC          [LSB]
+ */
+#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
+#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
+    _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) )
+
+//--------------------------------------------------------------------+
+// Device Descriptors
+//--------------------------------------------------------------------+
+tusb_desc_device_t const desc_device =
+{
+    .bLength            = sizeof(tusb_desc_device_t),
+    .bDescriptorType    = TUSB_DESC_DEVICE,
+    .bcdUSB             = 0x0200,
+
+    // Use Interface Association Descriptor (IAD) for CDC
+    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
+    .bDeviceClass       = TUSB_CLASS_MISC,
+    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
+    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
+    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+
+    .idVendor           = 0xCafe,
+    .idProduct          = USB_PID,
+    .bcdDevice          = 0x0100,
+
+    .iManufacturer      = 0x01,
+    .iProduct           = 0x02,
+    .iSerialNumber      = 0x03,
+
+    .bNumConfigurations = 0x01
+};
+
+// Invoked when received GET DEVICE DESCRIPTOR
+// Application return pointer to descriptor
+uint8_t const * tud_descriptor_device_cb(void)
+{
+  return (uint8_t const *) &desc_device;
+}
+
+//--------------------------------------------------------------------+
+// Configuration Descriptor
+//--------------------------------------------------------------------+
+enum
+{
+  ITF_NUM_AUDIO_CONTROL = 0,
+  ITF_NUM_AUDIO_STREAMING,
+  ITF_NUM_TOTAL
+};
+
+#define CONFIG_TOTAL_LEN    	(TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_MIC_FOUR_CH_DESC_LEN)
+
+#if TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX)
+  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
+  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
+  #define EPNUM_AUDIO   0x03
+
+#elif TU_CHECK_MCU(OPT_MCU_NRF5X)
+  // nRF5x ISO can only be endpoint 8
+  #define EPNUM_AUDIO   0x08
+
+#else
+  #define EPNUM_AUDIO   0x01
+#endif
+
+uint8_t const desc_configuration[] =
+{
+  // Interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
+
+  // Interface number, string index, EP Out & EP In address, EP size
+  TUD_AUDIO_MIC_FOUR_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN)
+};
+
+// Invoked when received GET CONFIGURATION DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+  return desc_configuration;
+}
+
+//--------------------------------------------------------------------+
+// String Descriptors
+//--------------------------------------------------------------------+
+
+// array of pointer to string descriptors
+char const* string_desc_arr [] =
+{
+    (const char[]) { 0x09, 0x04 }, 	// 0: is supported language is English (0x0409)
+    "PaniRCorp",                   	// 1: Manufacturer
+    "MicNode_4_Ch",    		// 2: Product
+    "123458",                      	// 3: Serials, should use chip ID
+    "UAC2",                 	 	// 4: Audio Interface
+};
+
+static uint16_t _desc_str[32];
+
+// Invoked when received GET STRING DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
+{
+  (void) langid;
+
+  uint8_t chr_count;
+
+  if ( index == 0)
+  {
+    memcpy(&_desc_str[1], string_desc_arr[0], 2);
+    chr_count = 1;
+  }else
+  {
+    // Convert ASCII string into UTF-16
+
+    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
+
+    const char* str = string_desc_arr[index];
+
+    // Cap at max char
+    chr_count = (uint8_t) strlen(str);
+    if ( chr_count > 31 ) chr_count = 31;
+
+    for(uint8_t i=0; i<chr_count; i++)
+    {
+      _desc_str[1+i] = str[i];
+    }
+  }
+
+  // first byte is length (including header), second byte is string type
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
+
+  return _desc_str;
+}

Firmware/Core/tinyusb/examples/device/audio_test/CMakeLists.txt

@@ -0,0 +1,28 @@
+cmake_minimum_required(VERSION 3.5)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT})
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
+)
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+  ${CMAKE_CURRENT_SOURCE_DIR}/src
+)
+
+# Configure compilation flags and libraries for the example... see the corresponding function
+# in hw/bsp/FAMILY/family.cmake for details.
+family_configure_device_example(${PROJECT})

Firmware/Core/tinyusb/examples/device/audio_test/Makefile

@@ -0,0 +1,12 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+INC += \
+  src \
+  $(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE += $(wildcard src/*.c)
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+include ../../rules.mk

Firmware/Core/tinyusb/examples/device/audio_test/skip.txt

@@ -0,0 +1,3 @@
+mcu:SAMD11
+mcu:SAME5X
+mcu:SAMG

Firmware/Core/tinyusb/examples/device/audio_test/src/main.c

@@ -0,0 +1,447 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Reinhard Panhuber
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+/* plot_audio_samples.py requires following modules:
+ * $ sudo apt install libportaudio
+ * $ pip3 install sounddevice matplotlib
+ *
+ * Then run
+ * $ python3 plot_audio_samples.py
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+
+#ifndef AUDIO_SAMPLE_RATE
+#define AUDIO_SAMPLE_RATE   48000
+#endif
+
+/* Blink pattern
+ * - 250 ms  : device not mounted
+ * - 1000 ms : device mounted
+ * - 2500 ms : device is suspended
+ */
+enum  {
+  BLINK_NOT_MOUNTED = 250,
+  BLINK_MOUNTED = 1000,
+  BLINK_SUSPENDED = 2500,
+};
+
+static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
+
+// Audio controls
+// Current states
+bool mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; 				          // +1 for master channel 0
+uint16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; 					// +1 for master channel 0
+uint32_t sampFreq;
+uint8_t clkValid;
+
+// Range states
+audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX+1]; 			// Volume range state
+audio_control_range_4_n_t(1) sampleFreqRng; 						// Sample frequency range state
+
+// Audio test data
+uint16_t test_buffer_audio[(CFG_TUD_AUDIO_EP_SZ_IN - 2) / 2];
+uint16_t startVal = 0;
+
+void led_blinking_task(void);
+void audio_task(void);
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+  board_init();
+
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
+
+  // Init values
+  sampFreq = AUDIO_SAMPLE_RATE;
+  clkValid = 1;
+
+  sampleFreqRng.wNumSubRanges = 1;
+  sampleFreqRng.subrange[0].bMin = AUDIO_SAMPLE_RATE;
+  sampleFreqRng.subrange[0].bMax = AUDIO_SAMPLE_RATE;
+  sampleFreqRng.subrange[0].bRes = 0;
+
+  while (1)
+  {
+    tud_task(); // tinyusb device task
+    led_blinking_task();
+    audio_task();
+  }
+
+
+  return 0;
+}
+
+//--------------------------------------------------------------------+
+// Device callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when device is mounted
+void tud_mount_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+// Invoked when device is unmounted
+void tud_umount_cb(void)
+{
+  blink_interval_ms = BLINK_NOT_MOUNTED;
+}
+
+// Invoked when usb bus is suspended
+// remote_wakeup_en : if host allow us  to perform remote wakeup
+// Within 7ms, device must draw an average of current less than 2.5 mA from bus
+void tud_suspend_cb(bool remote_wakeup_en)
+{
+  (void) remote_wakeup_en;
+  blink_interval_ms = BLINK_SUSPENDED;
+}
+
+// Invoked when usb bus is resumed
+void tud_resume_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+//--------------------------------------------------------------------+
+// AUDIO Task
+//--------------------------------------------------------------------+
+
+void audio_task(void)
+{
+  // Yet to be filled - e.g. put meas data into TX FIFOs etc.
+  // asm("nop");
+}
+
+//--------------------------------------------------------------------+
+// Application Callback API Implementations
+//--------------------------------------------------------------------+
+
+// Invoked when audio class specific set request received for an EP
+bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff)
+{
+  (void) rhport;
+  (void) pBuff;
+
+  // We do not support any set range requests here, only current value requests
+  TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR);
+
+  // Page 91 in UAC2 specification
+  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
+  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
+  uint8_t ep = TU_U16_LOW(p_request->wIndex);
+
+  (void) channelNum; (void) ctrlSel; (void) ep;
+
+  return false; 	// Yet not implemented
+}
+
+// Invoked when audio class specific set request received for an interface
+bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff)
+{
+  (void) rhport;
+  (void) pBuff;
+
+  // We do not support any set range requests here, only current value requests
+  TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR);
+
+  // Page 91 in UAC2 specification
+  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
+  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
+  uint8_t itf = TU_U16_LOW(p_request->wIndex);
+
+  (void) channelNum; (void) ctrlSel; (void) itf;
+
+  return false; 	// Yet not implemented
+}
+
+// Invoked when audio class specific set request received for an entity
+bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff)
+{
+  (void) rhport;
+
+  // Page 91 in UAC2 specification
+  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
+  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
+  uint8_t itf = TU_U16_LOW(p_request->wIndex);
+  uint8_t entityID = TU_U16_HIGH(p_request->wIndex);
+
+  (void) itf;
+
+  // We do not support any set range requests here, only current value requests
+  TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR);
+
+  // If request is for our feature unit
+  if ( entityID == 2 )
+  {
+    switch ( ctrlSel )
+    {
+      case AUDIO_FU_CTRL_MUTE:
+        // Request uses format layout 1
+        TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_1_t));
+
+        mute[channelNum] = ((audio_control_cur_1_t*) pBuff)->bCur;
+
+        TU_LOG2("    Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum);
+      return true;
+
+      case AUDIO_FU_CTRL_VOLUME:
+        // Request uses format layout 2
+        TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t));
+
+        volume[channelNum] = (uint16_t) ((audio_control_cur_2_t*) pBuff)->bCur;
+
+        TU_LOG2("    Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum);
+      return true;
+
+        // Unknown/Unsupported control
+      default:
+        TU_BREAKPOINT();
+      return false;
+    }
+  }
+  return false;    // Yet not implemented
+}
+
+// Invoked when audio class specific get request received for an EP
+bool tud_audio_get_req_ep_cb(uint8_t rhport, tusb_control_request_t const * p_request)
+{
+  (void) rhport;
+
+  // Page 91 in UAC2 specification
+  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
+  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
+  uint8_t ep = TU_U16_LOW(p_request->wIndex);
+
+  (void) channelNum; (void) ctrlSel; (void) ep;
+
+  //	return tud_control_xfer(rhport, p_request, &tmp, 1);
+
+  return false; 	// Yet not implemented
+}
+
+// Invoked when audio class specific get request received for an interface
+bool tud_audio_get_req_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request)
+{
+  (void) rhport;
+
+  // Page 91 in UAC2 specification
+  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
+  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
+  uint8_t itf = TU_U16_LOW(p_request->wIndex);
+
+  (void) channelNum; (void) ctrlSel; (void) itf;
+
+  return false; 	// Yet not implemented
+}
+
+// Invoked when audio class specific get request received for an entity
+bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const * p_request)
+{
+  (void) rhport;
+
+  // Page 91 in UAC2 specification
+  uint8_t channelNum = TU_U16_LOW(p_request->wValue);
+  uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue);
+  // uint8_t itf = TU_U16_LOW(p_request->wIndex); 			// Since we have only one audio function implemented, we do not need the itf value
+  uint8_t entityID = TU_U16_HIGH(p_request->wIndex);
+
+  // Input terminal (Microphone input)
+  if (entityID == 1)
+  {
+    switch ( ctrlSel )
+    {
+      case AUDIO_TE_CTRL_CONNECTOR:
+      {
+        // The terminal connector control only has a get request with only the CUR attribute.
+        audio_desc_channel_cluster_t ret;
+
+        // Those are dummy values for now
+        ret.bNrChannels = 1;
+        ret.bmChannelConfig = 0;
+        ret.iChannelNames = 0;
+
+        TU_LOG2("    Get terminal connector\r\n");
+
+        return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, (void*) &ret, sizeof(ret));
+      }
+      break;
+
+        // Unknown/Unsupported control selector
+      default:
+        TU_BREAKPOINT();
+        return false;
+    }
+  }
+
+  // Feature unit
+  if (entityID == 2)
+  {
+    switch ( ctrlSel )
+    {
+      case AUDIO_FU_CTRL_MUTE:
+        // Audio control mute cur parameter block consists of only one byte - we thus can send it right away
+        // There does not exist a range parameter block for mute
+        TU_LOG2("    Get Mute of channel: %u\r\n", channelNum);
+        return tud_control_xfer(rhport, p_request, &mute[channelNum], 1);
+
+      case AUDIO_FU_CTRL_VOLUME:
+        switch ( p_request->bRequest )
+        {
+          case AUDIO_CS_REQ_CUR:
+            TU_LOG2("    Get Volume of channel: %u\r\n", channelNum);
+            return tud_control_xfer(rhport, p_request, &volume[channelNum], sizeof(volume[channelNum]));
+
+          case AUDIO_CS_REQ_RANGE:
+            TU_LOG2("    Get Volume range of channel: %u\r\n", channelNum);
+
+            // Copy values - only for testing - better is version below
+            audio_control_range_2_n_t(1)
+            ret;
+
+            ret.wNumSubRanges = 1;
+            ret.subrange[0].bMin = -90;    // -90 dB
+            ret.subrange[0].bMax = 90;		// +90 dB
+            ret.subrange[0].bRes = 1; 		// 1 dB steps
+
+            return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, (void*) &ret, sizeof(ret));
+
+            // Unknown/Unsupported control
+          default:
+            TU_BREAKPOINT();
+            return false;
+        }
+      break;
+
+        // Unknown/Unsupported control
+      default:
+        TU_BREAKPOINT();
+        return false;
+    }
+  }
+
+  // Clock Source unit
+  if ( entityID == 4 )
+  {
+    switch ( ctrlSel )
+    {
+      case AUDIO_CS_CTRL_SAM_FREQ:
+        // channelNum is always zero in this case
+        switch ( p_request->bRequest )
+        {
+          case AUDIO_CS_REQ_CUR:
+            TU_LOG2("    Get Sample Freq.\r\n");
+            return tud_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq));
+
+          case AUDIO_CS_REQ_RANGE:
+            TU_LOG2("    Get Sample Freq. range\r\n");
+            return tud_control_xfer(rhport, p_request, &sampleFreqRng, sizeof(sampleFreqRng));
+
+           // Unknown/Unsupported control
+          default:
+            TU_BREAKPOINT();
+            return false;
+        }
+      break;
+
+      case AUDIO_CS_CTRL_CLK_VALID:
+        // Only cur attribute exists for this request
+        TU_LOG2("    Get Sample Freq. valid\r\n");
+        return tud_control_xfer(rhport, p_request, &clkValid, sizeof(clkValid));
+
+      // Unknown/Unsupported control
+      default:
+        TU_BREAKPOINT();
+        return false;
+    }
+  }
+
+  TU_LOG2("  Unsupported entity: %d\r\n", entityID);
+  return false; 	// Yet not implemented
+}
+
+bool tud_audio_tx_done_pre_load_cb(uint8_t rhport, uint8_t itf, uint8_t ep_in, uint8_t cur_alt_setting)
+{
+  (void) rhport;
+  (void) itf;
+  (void) ep_in;
+  (void) cur_alt_setting;
+
+  tud_audio_write ((uint8_t *)test_buffer_audio, CFG_TUD_AUDIO_EP_SZ_IN - 2);
+
+  return true;
+}
+
+bool tud_audio_tx_done_post_load_cb(uint8_t rhport, uint16_t n_bytes_copied, uint8_t itf, uint8_t ep_in, uint8_t cur_alt_setting)
+{
+  (void) rhport;
+  (void) n_bytes_copied;
+  (void) itf;
+  (void) ep_in;
+  (void) cur_alt_setting;
+
+  for (size_t cnt = 0; cnt < (CFG_TUD_AUDIO_EP_SZ_IN - 2) / 2; cnt++)
+  {
+    test_buffer_audio[cnt] = startVal++;
+  }
+
+  return true;
+}
+
+bool tud_audio_set_itf_close_EP_cb(uint8_t rhport, tusb_control_request_t const * p_request)
+{
+  (void) rhport;
+  (void) p_request;
+  startVal = 0;
+
+  return true;
+}
+
+//--------------------------------------------------------------------+
+// BLINKING TASK
+//--------------------------------------------------------------------+
+void led_blinking_task(void)
+{
+  static uint32_t start_ms = 0;
+  static bool led_state = false;
+
+  // Blink every interval ms
+  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
+  start_ms += blink_interval_ms;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}

Firmware/Core/tinyusb/examples/device/audio_test/src/plot_audio_samples.py

@@ -0,0 +1,38 @@
+import sounddevice as sd
+import matplotlib.pyplot as plt
+import numpy as np
+import platform
+import csv
+
+if __name__ == '__main__':
+
+    # If you got "ValueError: No input device matching", that is because your PC name example device
+    # differently from tested list below. Uncomment the next line to see full list and try to pick correct one
+    # print(sd.query_devices())
+
+    fs = 48000           # Sample rate
+    duration = 100e-3    # Duration of recording
+
+    if platform.system() == 'Windows':
+        # MME is needed since there are more than one MicNode device APIs (at least in Windows)
+        device = 'Microphone (MicNode) MME'
+    elif platform.system() == 'Darwin':
+        device = 'MicNode'
+    else:
+        device ='default'
+
+    myrecording = sd.rec(int(duration * fs), samplerate=fs, channels=1, dtype='int16', device=device)
+    print('Waiting...')
+    sd.wait()  # Wait until recording is finished
+    print('Done!')
+
+    time = np.arange(0, duration, 1 / fs)  # time vector
+    plt.plot(time, myrecording)
+    plt.xlabel('Time [s]')
+    plt.ylabel('Amplitude')
+    plt.title('MicNode')
+    plt.show()
+    
+    samples = np.array(myrecording)
+    np.savetxt('Output.csv', samples, delimiter=",", fmt='%s')
+    

Firmware/Core/tinyusb/examples/device/audio_test/src/tusb_config.h

@@ -0,0 +1,125 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS                 OPT_OS_NONE
+#endif
+
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG              0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
+
+// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
+// #define CFG_TUSB_DEBUG           0
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE    64
+#endif
+
+//------------- CLASS -------------//
+#define CFG_TUD_AUDIO             1
+#define CFG_TUD_CDC               0
+#define CFG_TUD_MSC               0
+#define CFG_TUD_HID               0
+#define CFG_TUD_MIDI              0
+#define CFG_TUD_VENDOR            0
+
+//--------------------------------------------------------------------
+// AUDIO CLASS DRIVER CONFIGURATION
+//--------------------------------------------------------------------
+
+// Have a look into audio_device.h for all configurations
+
+#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN                                 TUD_AUDIO_MIC_ONE_CH_DESC_LEN
+#define CFG_TUD_AUDIO_FUNC_1_N_AS_INT                                 1                                       // Number of Standard AS Interface Descriptors (4.9.1) defined per audio function - this is required to be able to remember the current alternate settings of these interfaces - We restrict us here to have a constant number for all audio functions (which means this has to be the maximum number of AS interfaces an audio function has and a second audio function with less AS interfaces just wastes a few bytes)
+#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ                              64                                      // Size of control request buffer
+
+#define CFG_TUD_AUDIO_ENABLE_EP_IN                                    1
+#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX                    2                                       // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below
+#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX                            1                                       // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor!
+#define CFG_TUD_AUDIO_EP_SZ_IN                                        (48 + 1) * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX      // 48 Samples (48 kHz) x 2 Bytes/Sample x CFG_TUD_AUDIO_N_CHANNELS_TX Channels - One extra sample is needed for asynchronous transfer adjustment, see feedback EP
+#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX                             CFG_TUD_AUDIO_EP_SZ_IN                  // Maximum EP IN size for all AS alternate settings used
+#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ                          CFG_TUD_AUDIO_EP_SZ_IN + 1
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */

Firmware/Core/tinyusb/examples/device/audio_test/src/usb_descriptors.c

@@ -0,0 +1,165 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "tusb.h"
+
+/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
+ * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
+ *
+ * Auto ProductID layout's Bitmap:
+ *   [MSB]     AUDIO | MIDI | HID | MSC | CDC          [LSB]
+ */
+#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
+#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
+    _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) )
+
+//--------------------------------------------------------------------+
+// Device Descriptors
+//--------------------------------------------------------------------+
+tusb_desc_device_t const desc_device =
+{
+    .bLength            = sizeof(tusb_desc_device_t),
+    .bDescriptorType    = TUSB_DESC_DEVICE,
+    .bcdUSB             = 0x0200,
+
+    // Use Interface Association Descriptor (IAD) for CDC
+    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
+    .bDeviceClass       = TUSB_CLASS_MISC,
+    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
+    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
+    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+
+    .idVendor           = 0xCafe,
+    .idProduct          = USB_PID,
+    .bcdDevice          = 0x0100,
+
+    .iManufacturer      = 0x01,
+    .iProduct           = 0x02,
+    .iSerialNumber      = 0x03,
+
+    .bNumConfigurations = 0x01
+};
+
+// Invoked when received GET DEVICE DESCRIPTOR
+// Application return pointer to descriptor
+uint8_t const * tud_descriptor_device_cb(void)
+{
+  return (uint8_t const *) &desc_device;
+}
+
+//--------------------------------------------------------------------+
+// Configuration Descriptor
+//--------------------------------------------------------------------+
+enum
+{
+  ITF_NUM_AUDIO_CONTROL = 0,
+  ITF_NUM_AUDIO_STREAMING,
+  ITF_NUM_TOTAL
+};
+
+#define CONFIG_TOTAL_LEN    	(TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_MIC_ONE_CH_DESC_LEN)
+
+#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
+  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
+  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
+  #define EPNUM_AUDIO   0x03
+
+#elif TU_CHECK_MCU(OPT_MCU_NRF5X)
+  // nRF5x ISO can only be endpoint 8
+  #define EPNUM_AUDIO   0x08
+
+#else
+  #define EPNUM_AUDIO   0x01
+#endif
+
+uint8_t const desc_configuration[] =
+{
+    // Interface count, string index, total length, attribute, power in mA
+    TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
+
+    // Interface number, string index, EP Out & EP In address, EP size
+    TUD_AUDIO_MIC_ONE_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN)
+};
+
+// Invoked when received GET CONFIGURATION DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+  return desc_configuration;
+}
+
+//--------------------------------------------------------------------+
+// String Descriptors
+//--------------------------------------------------------------------+
+
+// array of pointer to string descriptors
+char const* string_desc_arr [] =
+{
+    (const char[]) { 0x09, 0x04 }, 	// 0: is supported language is English (0x0409)
+    "PaniRCorp",                   	// 1: Manufacturer
+    "MicNode",              		// 2: Product
+    "123456",                      	// 3: Serials, should use chip ID
+    "UAC2",                 	 	// 4: Audio Interface
+};
+
+static uint16_t _desc_str[32];
+
+// Invoked when received GET STRING DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
+{
+  (void) langid;
+
+  uint8_t chr_count;
+
+  if ( index == 0)
+  {
+    memcpy(&_desc_str[1], string_desc_arr[0], 2);
+    chr_count = 1;
+  }else
+  {
+    // Convert ASCII string into UTF-16
+
+    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
+
+    const char* str = string_desc_arr[index];
+
+    // Cap at max char
+    chr_count = (uint8_t) strlen(str);
+    if ( chr_count > 31 ) chr_count = 31;
+
+    for(uint8_t i=0; i<chr_count; i++)
+    {
+      _desc_str[1+i] = str[i];
+    }
+  }
+
+  // first byte is length (including header), second byte is string type
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
+
+  return _desc_str;
+}

Firmware/Core/tinyusb/examples/device/board_test/CMakeLists.txt

@@ -0,0 +1,42 @@
+cmake_minimum_required(VERSION 3.5)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# Check for -DFAMILY=
+if(FAMILY MATCHES "^esp32s[2-3]")
+  # use BOARD-Directory name for project id
+  get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
+  set(PROJECT ${BOARD}-${PROJECT})
+
+  # TOP is absolute path to root directory of TinyUSB git repo
+  set(TOP "../../..")
+  get_filename_component(TOP "${TOP}" REALPATH)
+
+  project(${PROJECT})
+
+else()
+
+  # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
+  family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+  project(${PROJECT})
+
+  # Checks this example is valid for the family and initializes the project
+  family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+  add_executable(${PROJECT})
+
+  # Example source
+  target_sources(${PROJECT} PUBLIC
+          ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+          )
+
+  # Example include
+  target_include_directories(${PROJECT} PUBLIC
+          ${CMAKE_CURRENT_SOURCE_DIR}/src
+          )
+
+  # Configure compilation flags and libraries for the example... see the corresponding function
+  # in hw/bsp/FAMILY/family.cmake for details.
+  family_configure_device_example(${PROJECT})
+endif()

Firmware/Core/tinyusb/examples/device/board_test/Makefile

@@ -0,0 +1,12 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+INC += \
+  src \
+  $(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE += $(wildcard src/*.c)
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+include ../../rules.mk

Firmware/Core/tinyusb/examples/device/board_test/sdkconfig.defaults

@@ -0,0 +1,3 @@
+CONFIG_IDF_CMAKE=y
+CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y
+CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y

Firmware/Core/tinyusb/examples/device/board_test/src/CMakeLists.txt

@@ -0,0 +1,17 @@
+# FAMILY = esp32sx
+idf_component_register(SRCS "main.c"
+                    INCLUDE_DIRS "."
+                    REQUIRES freertos soc)
+                    
+file(TO_NATIVE_PATH "${TOP}/hw/bsp/${FAMILY}/boards/${BOARD}/board.cmake" board_cmake)
+
+if(EXISTS ${board_cmake})
+    include(${board_cmake})
+endif()
+
+idf_component_get_property( FREERTOS_ORIG_INCLUDE_PATH freertos ORIG_INCLUDE_PATH)
+target_include_directories(${COMPONENT_TARGET} PUBLIC
+  "${FREERTOS_ORIG_INCLUDE_PATH}"
+  "${TOP}/hw"
+  "${TOP}/src"
+)

Firmware/Core/tinyusb/examples/device/board_test/src/main.c

@@ -0,0 +1,86 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board.h"
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+
+/* Blink pattern
+ * - 250 ms  : button is not pressed
+ * - 1000 ms : button is pressed (and hold)
+ */
+enum  {
+  BLINK_PRESSED = 250,
+  BLINK_UNPRESSED = 1000
+};
+
+#define HELLO_STR   "Hello from TinyUSB\r\n"
+
+int main(void)
+{
+  board_init();
+  board_led_write(true);
+
+  uint32_t start_ms = 0;
+  bool led_state = false;
+
+  while (1)
+  {
+    uint32_t interval_ms = board_button_read() ? BLINK_PRESSED : BLINK_UNPRESSED;
+
+    // Blink and print every interval ms
+    if ( !(board_millis() - start_ms < interval_ms) )
+    {
+      board_uart_write(HELLO_STR, strlen(HELLO_STR));
+
+      start_ms = board_millis();
+
+      board_led_write(led_state);
+      led_state = 1 - led_state; // toggle
+    }
+
+    // echo
+    uint8_t ch;
+    if ( board_uart_read(&ch, 1) > 0 )
+    {
+      board_uart_write(&ch, 1);
+    }
+  }
+
+  return 0;
+}
+
+#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3
+void app_main(void)
+{
+  main();
+}
+#endif

Firmware/Core/tinyusb/examples/device/board_test/src/tusb_config.h

@@ -0,0 +1,77 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+// board_test example is special example that doesn't enable device or host stack
+// This can cause some TinyUSB API missing, this define hack to allow us to fill those API
+// to pass the compilation process
+#define tud_int_handler(x)
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+  #error CFG_TUSB_MCU must be defined
+#endif
+
+#ifndef CFG_TUSB_OS
+  #define CFG_TUSB_OS               OPT_OS_NONE
+#endif
+
+// This example only test LED & GPIO, disable both device and host stack
+#define CFG_TUD_ENABLED   0
+#define CFG_TUH_ENABLED   0
+
+// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
+// #define CFG_TUSB_DEBUG           0
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#endif
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */

Firmware/Core/tinyusb/examples/device/cdc_dual_ports/CMakeLists.txt

@@ -0,0 +1,28 @@
+cmake_minimum_required(VERSION 3.5)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT})
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
+        )
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src
+        )
+
+# Configure compilation flags and libraries for the example... see the corresponding function
+# in hw/bsp/FAMILY/family.cmake for details.
+family_configure_device_example(${PROJECT})

Firmware/Core/tinyusb/examples/device/cdc_dual_ports/Makefile

@@ -0,0 +1,12 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+INC += \
+  src \
+  $(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE += $(wildcard src/*.c)
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+include ../../rules.mk

Firmware/Core/tinyusb/examples/device/cdc_dual_ports/src/main.c

@@ -0,0 +1,103 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <ctype.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+//------------- prototypes -------------//
+static void cdc_task(void);
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+  board_init();
+
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
+
+  while (1)
+  {
+    tud_task(); // tinyusb device task
+    cdc_task();
+  }
+
+  return 0;
+}
+
+// echo to either Serial0 or Serial1
+// with Serial0 as all lower case, Serial1 as all upper case
+static void echo_serial_port(uint8_t itf, uint8_t buf[], uint32_t count)
+{
+  uint8_t const case_diff = 'a' - 'A';
+
+  for(uint32_t i=0; i<count; i++)
+  {
+    if (itf == 0)
+    {
+      // echo back 1st port as lower case
+      if (isupper(buf[i])) buf[i] += case_diff;
+    }
+    else
+    {
+      // echo back 2nd port as upper case
+      if (islower(buf[i])) buf[i] -= case_diff;
+    }
+
+    tud_cdc_n_write_char(itf, buf[i]);
+  }
+  tud_cdc_n_write_flush(itf);
+}
+
+//--------------------------------------------------------------------+
+// USB CDC
+//--------------------------------------------------------------------+
+static void cdc_task(void)
+{
+  uint8_t itf;
+
+  for (itf = 0; itf < CFG_TUD_CDC; itf++)
+  {
+    // connected() check for DTR bit
+    // Most but not all terminal client set this when making connection
+    // if ( tud_cdc_n_connected(itf) )
+    {
+      if ( tud_cdc_n_available(itf) )
+      {
+        uint8_t buf[64];
+
+        uint32_t count = tud_cdc_n_read(itf, buf, sizeof(buf));
+
+        // echo back to both serial ports
+        echo_serial_port(0, buf, count);
+        echo_serial_port(1, buf, count);
+      }
+    }
+  }
+}

Firmware/Core/tinyusb/examples/device/cdc_dual_ports/src/tusb_config.h

@@ -0,0 +1,111 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by board.mk
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS           OPT_OS_NONE
+#endif
+
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE    64
+#endif
+
+//------------- CLASS -------------//
+#define CFG_TUD_CDC               2
+#define CFG_TUD_MSC               0
+#define CFG_TUD_HID               0
+#define CFG_TUD_MIDI              0
+#define CFG_TUD_VENDOR            0
+
+// CDC FIFO size of TX and RX
+#define CFG_TUD_CDC_RX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
+#define CFG_TUD_CDC_TX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
+
+// CDC Endpoint transfer buffer size, more is faster
+#define CFG_TUD_CDC_EP_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */

Firmware/Core/tinyusb/examples/device/cdc_dual_ports/src/usb_descriptors.c

@@ -0,0 +1,264 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "tusb.h"
+
+/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
+ * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
+ *
+ * Auto ProductID layout's Bitmap:
+ *   [MSB]       MIDI | HID | MSC | CDC          [LSB]
+ */
+#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
+#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
+                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
+
+#define USB_VID   0xCafe
+#define USB_BCD   0x0200
+
+//--------------------------------------------------------------------+
+// Device Descriptors
+//--------------------------------------------------------------------+
+tusb_desc_device_t const desc_device =
+{
+    .bLength            = sizeof(tusb_desc_device_t),
+    .bDescriptorType    = TUSB_DESC_DEVICE,
+    .bcdUSB             = USB_BCD,
+
+    // Use Interface Association Descriptor (IAD) for CDC
+    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
+    .bDeviceClass       = TUSB_CLASS_MISC,
+    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
+    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
+    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+
+    .idVendor           = USB_VID,
+    .idProduct          = USB_PID,
+    .bcdDevice          = 0x0100,
+
+    .iManufacturer      = 0x01,
+    .iProduct           = 0x02,
+    .iSerialNumber      = 0x03,
+
+    .bNumConfigurations = 0x01
+};
+
+// Invoked when received GET DEVICE DESCRIPTOR
+// Application return pointer to descriptor
+uint8_t const * tud_descriptor_device_cb(void)
+{
+  return (uint8_t const *) &desc_device;
+}
+
+//--------------------------------------------------------------------+
+// Configuration Descriptor
+//--------------------------------------------------------------------+
+enum
+{
+  ITF_NUM_CDC_0 = 0,
+  ITF_NUM_CDC_0_DATA,
+  ITF_NUM_CDC_1,
+  ITF_NUM_CDC_1_DATA,
+  ITF_NUM_TOTAL
+};
+
+#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + CFG_TUD_CDC * TUD_CDC_DESC_LEN)
+
+#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
+  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
+  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
+  #define EPNUM_CDC_0_NOTIF   0x81
+  #define EPNUM_CDC_0_OUT     0x02
+  #define EPNUM_CDC_0_IN      0x82
+
+  #define EPNUM_CDC_1_NOTIF   0x84
+  #define EPNUM_CDC_1_OUT     0x05
+  #define EPNUM_CDC_1_IN      0x85
+
+#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU ==  OPT_MCU_SAMX7X
+  // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT
+  //    e.g EP1 OUT & EP1 IN cannot exist together
+  #define EPNUM_CDC_0_NOTIF   0x81
+  #define EPNUM_CDC_0_OUT     0x02
+  #define EPNUM_CDC_0_IN      0x83
+
+  #define EPNUM_CDC_1_NOTIF   0x84
+  #define EPNUM_CDC_1_OUT     0x05
+  #define EPNUM_CDC_1_IN      0x86
+
+#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X
+  // FT9XX doesn't support a same endpoint number with different direction IN and OUT
+  //    e.g EP1 OUT & EP1 IN cannot exist together
+  #define EPNUM_CDC_0_NOTIF   0x81
+  #define EPNUM_CDC_0_OUT     0x02
+  #define EPNUM_CDC_0_IN      0x83
+
+  #define EPNUM_CDC_1_NOTIF   0x84
+  #define EPNUM_CDC_1_OUT     0x05
+  #define EPNUM_CDC_1_IN      0x86
+
+#else
+  #define EPNUM_CDC_0_NOTIF   0x81
+  #define EPNUM_CDC_0_OUT     0x02
+  #define EPNUM_CDC_0_IN      0x82
+
+  #define EPNUM_CDC_1_NOTIF   0x83
+  #define EPNUM_CDC_1_OUT     0x04
+  #define EPNUM_CDC_1_IN      0x84
+#endif
+
+uint8_t const desc_fs_configuration[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
+
+  // 1st CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size.
+  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 8, EPNUM_CDC_0_OUT, EPNUM_CDC_0_IN, 64),
+
+  // 2nd CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size.
+  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 8, EPNUM_CDC_1_OUT, EPNUM_CDC_1_IN, 64),
+};
+
+#if TUD_OPT_HIGH_SPEED
+// Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration
+
+uint8_t const desc_hs_configuration[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
+
+  // 1st CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size.
+  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 8, EPNUM_CDC_0_OUT, EPNUM_CDC_0_IN, 512),
+
+  // 2nd CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size.
+  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 8, EPNUM_CDC_1_OUT, EPNUM_CDC_1_IN, 512),
+};
+
+// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed
+tusb_desc_device_qualifier_t const desc_device_qualifier =
+{
+  .bLength            = sizeof(tusb_desc_device_t),
+  .bDescriptorType    = TUSB_DESC_DEVICE,
+  .bcdUSB             = USB_BCD,
+
+  .bDeviceClass       = TUSB_CLASS_MISC,
+  .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
+  .bDeviceProtocol    = MISC_PROTOCOL_IAD,
+
+  .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+  .bNumConfigurations = 0x01,
+  .bReserved          = 0x00
+};
+
+// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete.
+// device_qualifier descriptor describes information about a high-speed capable device that would
+// change if the device were operating at the other speed. If not highspeed capable stall this request.
+uint8_t const* tud_descriptor_device_qualifier_cb(void)
+{
+  return (uint8_t const*) &desc_device_qualifier;
+}
+
+// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa
+uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+
+  // if link speed is high return fullspeed config, and vice versa
+  return (tud_speed_get() == TUSB_SPEED_HIGH) ?  desc_fs_configuration : desc_hs_configuration;
+}
+
+#endif // highspeed
+
+// Invoked when received GET CONFIGURATION DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+
+#if TUD_OPT_HIGH_SPEED
+  // Although we are highspeed, host may be fullspeed.
+  return (tud_speed_get() == TUSB_SPEED_HIGH) ?  desc_hs_configuration : desc_fs_configuration;
+#else
+  return desc_fs_configuration;
+#endif
+}
+
+//--------------------------------------------------------------------+
+// String Descriptors
+//--------------------------------------------------------------------+
+
+// array of pointer to string descriptors
+char const* string_desc_arr [] =
+{
+  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
+  "TinyUSB",                     // 1: Manufacturer
+  "TinyUSB Device",              // 2: Product
+  "123456",                      // 3: Serials, should use chip ID
+  "TinyUSB CDC",                 // 4: CDC Interface
+};
+
+static uint16_t _desc_str[32];
+
+// Invoked when received GET STRING DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
+{
+  (void) langid;
+
+  uint8_t chr_count;
+
+  if ( index == 0)
+  {
+    memcpy(&_desc_str[1], string_desc_arr[0], 2);
+    chr_count = 1;
+  }else
+  {
+    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
+    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
+
+    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
+
+    const char* str = string_desc_arr[index];
+
+    // Cap at max char
+    chr_count = (uint8_t) strlen(str);
+    if ( chr_count > 31 ) chr_count = 31;
+
+    // Convert ASCII string into UTF-16
+    for(uint8_t i=0; i<chr_count; i++)
+    {
+      _desc_str[1+i] = str[i];
+    }
+  }
+
+  // first byte is length (including header), second byte is string type
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
+
+  return _desc_str;
+}

Firmware/Core/tinyusb/examples/device/cdc_msc/CMakeLists.txt

@@ -0,0 +1,29 @@
+cmake_minimum_required(VERSION 3.5)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT})
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
+        )
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src
+        )
+
+# Configure compilation flags and libraries for the example... see the corresponding function
+# in hw/bsp/FAMILY/family.cmake for details.
+family_configure_device_example(${PROJECT})

Firmware/Core/tinyusb/examples/device/cdc_msc/Makefile

@@ -0,0 +1,12 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+INC += \
+	src \
+	$(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE += $(wildcard src/*.c)
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+include ../../rules.mk

Firmware/Core/tinyusb/examples/device/cdc_msc/skip.txt

@@ -0,0 +1 @@
+mcu:SAMD11

Firmware/Core/tinyusb/examples/device/cdc_msc/src/main.c

@@ -0,0 +1,169 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+
+/* Blink pattern
+ * - 250 ms  : device not mounted
+ * - 1000 ms : device mounted
+ * - 2500 ms : device is suspended
+ */
+enum
+{
+  BLINK_NOT_MOUNTED = 250,
+  BLINK_MOUNTED = 1000,
+  BLINK_SUSPENDED = 2500,
+};
+
+static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
+
+void led_blinking_task(void);
+void cdc_task(void);
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+  board_init();
+
+  // init device stack on configured roothub port
+  tusb_init(BOARD_TUD_RHPORT);
+
+  while (1)
+  {
+    tud_task(); // tinyusb device task
+    led_blinking_task();
+
+    cdc_task();
+  }
+
+  return 0;
+}
+
+//--------------------------------------------------------------------+
+// Device callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when device is mounted
+void tud_mount_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+// Invoked when device is unmounted
+void tud_umount_cb(void)
+{
+  blink_interval_ms = BLINK_NOT_MOUNTED;
+}
+
+// Invoked when usb bus is suspended
+// remote_wakeup_en : if host allow us  to perform remote wakeup
+// Within 7ms, device must draw an average of current less than 2.5 mA from bus
+void tud_suspend_cb(bool remote_wakeup_en)
+{
+  (void)remote_wakeup_en;
+  blink_interval_ms = BLINK_SUSPENDED;
+}
+
+// Invoked when usb bus is resumed
+void tud_resume_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+//--------------------------------------------------------------------+
+// USB CDC
+//--------------------------------------------------------------------+
+void cdc_task(void)
+{
+  // connected() check for DTR bit
+  // Most but not all terminal client set this when making connection
+  // if ( tud_cdc_connected() )
+  {
+    // connected and there are data available
+    if (tud_cdc_available())
+    {
+      // read data
+      char buf[64];
+      uint32_t count = tud_cdc_read(buf, sizeof(buf));
+      (void)count;
+
+      // Echo back
+      // Note: Skip echo by commenting out write() and write_flush()
+      // for throughput test e.g
+      //    $ dd if=/dev/zero of=/dev/ttyACM0 count=10000
+      tud_cdc_write(buf, count);
+      tud_cdc_write_flush();
+    }
+  }
+}
+
+// Invoked when cdc when line state changed e.g connected/disconnected
+void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts)
+{
+  (void)itf;
+  (void)rts;
+
+  // TODO set some indicator
+  if (dtr)
+  {
+    // Terminal connected
+  }
+  else
+  {
+    // Terminal disconnected
+  }
+}
+
+// Invoked when CDC interface received data from host
+void tud_cdc_rx_cb(uint8_t itf)
+{
+  (void)itf;
+}
+
+//--------------------------------------------------------------------+
+// BLINKING TASK
+//--------------------------------------------------------------------+
+void led_blinking_task(void)
+{
+  static uint32_t start_ms = 0;
+  static bool led_state = false;
+
+  // Blink every interval ms
+  if (board_millis() - start_ms < blink_interval_ms)
+    return; // not enough time
+  start_ms += blink_interval_ms;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}

Firmware/Core/tinyusb/examples/device/cdc_msc/src/msc_disk.c

@@ -0,0 +1,272 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+#if CFG_TUD_MSC
+
+// whether host does safe-eject
+static bool ejected = false;
+
+// Some MCU doesn't have enough 8KB SRAM to store the whole disk
+// We will use Flash as read-only disk with board that has
+// CFG_EXAMPLE_MSC_READONLY defined
+
+#define README_CONTENTS \
+"This is tinyusb's MassStorage Class demo.\r\n\r\n\
+If you find any bugs or get any questions, feel free to file an\r\n\
+issue at github.com/hathach/tinyusb"
+
+enum
+{
+  DISK_BLOCK_NUM  = 16, // 8KB is the smallest size that windows allow to mount
+  DISK_BLOCK_SIZE = 512
+};
+
+#ifdef CFG_EXAMPLE_MSC_READONLY
+const
+#endif
+uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
+{
+  //------------- Block0: Boot Sector -------------//
+  // byte_per_sector    = DISK_BLOCK_SIZE; fat12_sector_num_16  = DISK_BLOCK_NUM;
+  // sector_per_cluster = 1; reserved_sectors = 1;
+  // fat_num            = 1; fat12_root_entry_num = 16;
+  // sector_per_fat     = 1; sector_per_track = 1; head_num = 1; hidden_sectors = 0;
+  // drive_number       = 0x80; media_type = 0xf8; extended_boot_signature = 0x29;
+  // filesystem_type    = "FAT12   "; volume_serial_number = 0x1234; volume_label = "TinyUSB MSC";
+  // FAT magic code at offset 510-511
+  {
+      0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00,
+      0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T' , 'i' , 'n' , 'y' , 'U' ,
+      'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00,
+
+      // Zero up to 2 last bytes of FAT magic code
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA
+  },
+
+  //------------- Block1: FAT12 Table -------------//
+  {
+      0xF8, 0xFF, 0xFF, 0xFF, 0x0F // // first 2 entries must be F8FF, third entry is cluster end of readme file
+  },
+
+  //------------- Block2: Root Directory -------------//
+  {
+      // first entry is volume label
+      'T' , 'i' , 'n' , 'y' , 'U' , 'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x08, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      // second entry is readme file
+      'R' , 'E' , 'A' , 'D' , 'M' , 'E' , ' ' , ' ' , 'T' , 'X' , 'T' , 0x20, 0x00, 0xC6, 0x52, 0x6D,
+      0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00,
+      sizeof(README_CONTENTS)-1, 0x00, 0x00, 0x00 // readme's files size (4 Bytes)
+  },
+
+  //------------- Block3: Readme Content -------------//
+  README_CONTENTS
+};
+
+// Invoked when received SCSI_CMD_INQUIRY
+// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively
+void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4])
+{
+  (void) lun;
+
+  const char vid[] = "TinyUSB";
+  const char pid[] = "Mass Storage";
+  const char rev[] = "1.0";
+
+  memcpy(vendor_id  , vid, strlen(vid));
+  memcpy(product_id , pid, strlen(pid));
+  memcpy(product_rev, rev, strlen(rev));
+}
+
+// Invoked when received Test Unit Ready command.
+// return true allowing host to read/write this LUN e.g SD card inserted
+bool tud_msc_test_unit_ready_cb(uint8_t lun)
+{
+  (void) lun;
+
+  // RAM disk is ready until ejected
+  if (ejected) {
+    // Additional Sense 3A-00 is NOT_FOUND
+    tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3a, 0x00);
+    return false;
+  }
+
+  return true;
+}
+
+// Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size
+// Application update block count and block size
+void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size)
+{
+  (void) lun;
+
+  *block_count = DISK_BLOCK_NUM;
+  *block_size  = DISK_BLOCK_SIZE;
+}
+
+// Invoked when received Start Stop Unit command
+// - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage
+// - Start = 1 : active mode, if load_eject = 1 : load disk storage
+bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject)
+{
+  (void) lun;
+  (void) power_condition;
+
+  if ( load_eject )
+  {
+    if (start)
+    {
+      // load disk storage
+    }else
+    {
+      // unload disk storage
+      ejected = true;
+    }
+  }
+
+  return true;
+}
+
+// Callback invoked when received READ10 command.
+// Copy disk's data to buffer (up to bufsize) and return number of copied bytes.
+int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize)
+{
+  (void) lun;
+
+  // out of ramdisk
+  if ( lba >= DISK_BLOCK_NUM ) return -1;
+
+  uint8_t const* addr = msc_disk[lba] + offset;
+  memcpy(buffer, addr, bufsize);
+
+  return (int32_t) bufsize;
+}
+
+bool tud_msc_is_writable_cb (uint8_t lun)
+{
+  (void) lun;
+
+#ifdef CFG_EXAMPLE_MSC_READONLY
+  return false;
+#else
+  return true;
+#endif
+}
+
+// Callback invoked when received WRITE10 command.
+// Process data in buffer to disk's storage and return number of written bytes
+int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize)
+{
+  (void) lun;
+
+  // out of ramdisk
+  if ( lba >= DISK_BLOCK_NUM ) return -1;
+
+#ifndef CFG_EXAMPLE_MSC_READONLY
+  uint8_t* addr = msc_disk[lba] + offset;
+  memcpy(addr, buffer, bufsize);
+#else
+  (void) lba; (void) offset; (void) buffer;
+#endif
+
+  return (int32_t) bufsize;
+}
+
+// Callback invoked when received an SCSI command not in built-in list below
+// - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE
+// - READ10 and WRITE10 has their own callbacks
+int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize)
+{
+  // read10 & write10 has their own callback and MUST not be handled here
+
+  void const* response = NULL;
+  int32_t resplen = 0;
+
+  // most scsi handled is input
+  bool in_xfer = true;
+
+  switch (scsi_cmd[0])
+  {
+    default:
+      // Set Sense = Invalid Command Operation
+      tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
+
+      // negative means error -> tinyusb could stall and/or response with failed status
+      resplen = -1;
+    break;
+  }
+
+  // return resplen must not larger than bufsize
+  if ( resplen > bufsize ) resplen = bufsize;
+
+  if ( response && (resplen > 0) )
+  {
+    if(in_xfer)
+    {
+      memcpy(buffer, response, (size_t) resplen);
+    }else
+    {
+      // SCSI output
+    }
+  }
+
+  return (int32_t) resplen;
+}
+
+#endif

Firmware/Core/tinyusb/examples/device/cdc_msc/src/tusb_config.h

@@ -0,0 +1,114 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+//--------------------------------------------------------------------
+// Common Configuration
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS           OPT_OS_NONE
+#endif
+
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN    __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE    64
+#endif
+
+//------------- CLASS -------------//
+#define CFG_TUD_CDC              1
+#define CFG_TUD_MSC              1
+#define CFG_TUD_HID              0
+#define CFG_TUD_MIDI             0
+#define CFG_TUD_VENDOR           0
+
+// CDC FIFO size of TX and RX
+#define CFG_TUD_CDC_RX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
+#define CFG_TUD_CDC_TX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
+
+// CDC Endpoint transfer buffer size, more is faster
+#define CFG_TUD_CDC_EP_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
+
+// MSC Buffer size of Device Mass storage
+#define CFG_TUD_MSC_EP_BUFSIZE   512
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */

Firmware/Core/tinyusb/examples/device/cdc_msc/src/usb_descriptors.c

@@ -0,0 +1,288 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "tusb.h"
+
+/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
+ * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
+ *
+ * Auto ProductID layout's Bitmap:
+ *   [MSB]         HID | MSC | CDC          [LSB]
+ */
+#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
+#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
+                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
+
+#define USB_VID   0xCafe
+#define USB_BCD   0x0200
+
+//--------------------------------------------------------------------+
+// Device Descriptors
+//--------------------------------------------------------------------+
+tusb_desc_device_t const desc_device =
+{
+  .bLength            = sizeof(tusb_desc_device_t),
+  .bDescriptorType    = TUSB_DESC_DEVICE,
+  .bcdUSB             = USB_BCD,
+
+  // Use Interface Association Descriptor (IAD) for CDC
+  // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
+  .bDeviceClass       = TUSB_CLASS_MISC,
+  .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
+  .bDeviceProtocol    = MISC_PROTOCOL_IAD,
+
+  .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+
+  .idVendor           = USB_VID,
+  .idProduct          = USB_PID,
+  .bcdDevice          = 0x0100,
+
+  .iManufacturer      = 0x01,
+  .iProduct           = 0x02,
+  .iSerialNumber      = 0x03,
+
+  .bNumConfigurations = 0x01
+};
+
+// Invoked when received GET DEVICE DESCRIPTOR
+// Application return pointer to descriptor
+uint8_t const * tud_descriptor_device_cb(void)
+{
+  return (uint8_t const *) &desc_device;
+}
+
+//--------------------------------------------------------------------+
+// Configuration Descriptor
+//--------------------------------------------------------------------+
+
+enum
+{
+  ITF_NUM_CDC = 0,
+  ITF_NUM_CDC_DATA,
+  ITF_NUM_MSC,
+  ITF_NUM_TOTAL
+};
+
+#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
+  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
+  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ...
+  #define EPNUM_CDC_NOTIF   0x81
+  #define EPNUM_CDC_OUT     0x02
+  #define EPNUM_CDC_IN      0x82
+
+  #define EPNUM_MSC_OUT     0x05
+  #define EPNUM_MSC_IN      0x85
+
+#elif CFG_TUSB_MCU == OPT_MCU_SAMG  || CFG_TUSB_MCU ==  OPT_MCU_SAMX7X
+  // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT
+  //    e.g EP1 OUT & EP1 IN cannot exist together
+  #define EPNUM_CDC_NOTIF   0x81
+  #define EPNUM_CDC_OUT     0x02
+  #define EPNUM_CDC_IN      0x83
+
+  #define EPNUM_MSC_OUT     0x04
+  #define EPNUM_MSC_IN      0x85
+
+#elif CFG_TUSB_MCU == OPT_MCU_CXD56
+  // CXD56 doesn't support a same endpoint number with different direction IN and OUT
+  //    e.g EP1 OUT & EP1 IN cannot exist together
+  // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number
+  // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN)
+  #define EPNUM_CDC_NOTIF   0x83
+  #define EPNUM_CDC_OUT     0x02
+  #define EPNUM_CDC_IN      0x81
+
+  #define EPNUM_MSC_OUT     0x05
+  #define EPNUM_MSC_IN      0x84
+
+#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X
+  // FT9XX doesn't support a same endpoint number with different direction IN and OUT
+  //    e.g EP1 OUT & EP1 IN cannot exist together
+  #define EPNUM_CDC_NOTIF   0x81
+  #define EPNUM_CDC_OUT     0x02
+  #define EPNUM_CDC_IN      0x83
+
+  #define EPNUM_MSC_OUT     0x04
+  #define EPNUM_MSC_IN      0x85
+
+#else
+  #define EPNUM_CDC_NOTIF   0x81
+  #define EPNUM_CDC_OUT     0x02
+  #define EPNUM_CDC_IN      0x82
+
+  #define EPNUM_MSC_OUT     0x03
+  #define EPNUM_MSC_IN      0x83
+
+#endif
+
+#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MSC_DESC_LEN)
+
+// full speed configuration
+uint8_t const desc_fs_configuration[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
+
+  // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
+  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64),
+
+  // Interface number, string index, EP Out & EP In address, EP size
+  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64),
+};
+
+#if TUD_OPT_HIGH_SPEED
+// Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration
+
+// high speed configuration
+uint8_t const desc_hs_configuration[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
+
+  // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
+  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512),
+
+  // Interface number, string index, EP Out & EP In address, EP size
+  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512),
+};
+
+// other speed configuration
+uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN];
+
+// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed
+tusb_desc_device_qualifier_t const desc_device_qualifier =
+{
+  .bLength            = sizeof(tusb_desc_device_qualifier_t),
+  .bDescriptorType    = TUSB_DESC_DEVICE_QUALIFIER,
+  .bcdUSB             = USB_BCD,
+
+  .bDeviceClass       = TUSB_CLASS_MISC,
+  .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
+  .bDeviceProtocol    = MISC_PROTOCOL_IAD,
+
+  .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+  .bNumConfigurations = 0x01,
+  .bReserved          = 0x00
+};
+
+// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete.
+// device_qualifier descriptor describes information about a high-speed capable device that would
+// change if the device were operating at the other speed. If not highspeed capable stall this request.
+uint8_t const* tud_descriptor_device_qualifier_cb(void)
+{
+  return (uint8_t const*) &desc_device_qualifier;
+}
+
+// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa
+uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+
+  // if link speed is high return fullspeed config, and vice versa
+  // Note: the descriptor type is OHER_SPEED_CONFIG instead of CONFIG
+  memcpy(desc_other_speed_config,
+         (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_fs_configuration : desc_hs_configuration,
+         CONFIG_TOTAL_LEN);
+
+  desc_other_speed_config[1] = TUSB_DESC_OTHER_SPEED_CONFIG;
+
+  return desc_other_speed_config;
+}
+
+#endif // highspeed
+
+
+// Invoked when received GET CONFIGURATION DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+
+#if TUD_OPT_HIGH_SPEED
+  // Although we are highspeed, host may be fullspeed.
+  return (tud_speed_get() == TUSB_SPEED_HIGH) ?  desc_hs_configuration : desc_fs_configuration;
+#else
+  return desc_fs_configuration;
+#endif
+}
+
+//--------------------------------------------------------------------+
+// String Descriptors
+//--------------------------------------------------------------------+
+
+// array of pointer to string descriptors
+char const* string_desc_arr [] =
+{
+  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
+  "TinyUSB",                     // 1: Manufacturer
+  "TinyUSB Device",              // 2: Product
+  "123456789012",                // 3: Serials, should use chip ID
+  "TinyUSB CDC",                 // 4: CDC Interface
+  "TinyUSB MSC",                 // 5: MSC Interface
+};
+
+static uint16_t _desc_str[32];
+
+// Invoked when received GET STRING DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
+{
+  (void) langid;
+
+  uint8_t chr_count;
+
+  if ( index == 0)
+  {
+    memcpy(&_desc_str[1], string_desc_arr[0], 2);
+    chr_count = 1;
+  }else
+  {
+    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
+    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
+
+    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
+
+    const char* str = string_desc_arr[index];
+
+    // Cap at max char
+    chr_count = (uint8_t) strlen(str);
+    if ( chr_count > 31 ) chr_count = 31;
+
+    // Convert ASCII string into UTF-16
+    for(uint8_t i=0; i<chr_count; i++)
+    {
+      _desc_str[1+i] = str[i];
+    }
+  }
+
+  // first byte is length (including header), second byte is string type
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
+
+  return _desc_str;
+}

Firmware/Core/tinyusb/examples/device/cdc_msc_freertos/CMakeLists.txt

@@ -0,0 +1,22 @@
+cmake_minimum_required(VERSION 3.5)
+
+# TOP is absolute path to root directory of TinyUSB git repo
+# needed for esp32sx build. TODO could be removed later on
+set(TOP "../../..")
+get_filename_component(TOP "${TOP}" REALPATH)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT})
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+# Check for -DFAMILY=
+if(FAMILY MATCHES "^esp32s[2-3]")
+else()
+  message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
+endif()

Firmware/Core/tinyusb/examples/device/cdc_msc_freertos/Makefile

@@ -0,0 +1,49 @@
+DEPS_SUBMODULES += lib/FreeRTOS-Kernel
+
+include ../../../tools/top.mk
+include ../../make.mk
+
+FREERTOS_SRC = lib/FreeRTOS-Kernel
+FREERTOS_PORTABLE_SRC= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC)/$(FREERTOS_PORT)
+
+INC += \
+	src \
+	src/FreeRTOSConfig \
+	$(TOP)/hw \
+	$(TOP)/$(FREERTOS_SRC)/include \
+	$(TOP)/$(FREERTOS_PORTABLE_SRC)
+	
+# Example source
+EXAMPLE_SOURCE = \
+	src/freertos_hook.c \
+	src/main.c \
+	src/msc_disk.c \
+	src/usb_descriptors.c
+
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+# FreeRTOS source, all files in port folder
+SRC_C += \
+	$(FREERTOS_SRC)/list.c \
+	$(FREERTOS_SRC)/queue.c \
+	$(FREERTOS_SRC)/tasks.c \
+	$(FREERTOS_SRC)/timers.c \
+	$(subst ../../../,,$(wildcard ../../../$(FREERTOS_PORTABLE_SRC)/*.c))
+
+SRC_S += \
+	$(subst ../../../,,$(wildcard ../../../$(FREERTOS_PORTABLE_SRC)/*.s))
+
+# include heap manage if configSUPPORT_DYNAMIC_ALLOCATION = 1
+# SRC_C += $(FREERTOS_SRC)/portable/MemMang/heap_1.c
+# CFLAGS += -Wno-error=sign-compare
+
+# Suppress FreeRTOSConfig.h warnings
+GCC_CFLAGS += -Wno-error=redundant-decls
+
+# Suppress FreeRTOS source warnings
+GCC_CFLAGS += -Wno-error=cast-qual
+
+# FreeRTOS (lto + Os) linker issue
+LDFLAGS += -Wl,--undefined=vTaskSwitchContext
+
+include ../../rules.mk

Firmware/Core/tinyusb/examples/device/cdc_msc_freertos/sdkconfig.defaults

@@ -0,0 +1,3 @@
+CONFIG_IDF_CMAKE=y
+CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y
+CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y

Firmware/Core/tinyusb/examples/device/cdc_msc_freertos/skip.txt

@@ -0,0 +1,12 @@
+mcu:CH32V307
+mcu:CXD56
+mcu:F1C100S
+mcu:GD32VF103
+mcu:MKL25ZXX
+mcu:MSP430x5xx
+mcu:RP2040
+mcu:SAMD11
+mcu:SAMX7X
+mcu:VALENTYUSB_EPTRI
+family:broadcom_32bit
+family:broadcom_64bit

Firmware/Core/tinyusb/examples/device/cdc_msc_freertos/src/CMakeLists.txt

@@ -0,0 +1,35 @@
+idf_component_register(SRCS "main.c" "usb_descriptors.c" "msc_disk.c"
+                    INCLUDE_DIRS "."
+                    REQUIRES freertos soc)
+
+file(TO_NATIVE_PATH "${TOP}/hw/bsp/${FAMILY}/boards/${BOARD}/board.cmake" board_cmake)
+
+if(EXISTS ${board_cmake})
+    include(${board_cmake})
+endif()
+
+target_include_directories(${COMPONENT_TARGET} PUBLIC
+  "${TOP}/hw"
+  "${TOP}/src"
+)
+
+target_compile_definitions(${COMPONENT_TARGET} PUBLIC
+  ESP_PLATFORM
+)
+
+target_sources(${COMPONENT_TARGET} PUBLIC
+  "${TOP}/src/tusb.c"
+  "${TOP}/src/common/tusb_fifo.c"
+  "${TOP}/src/device/usbd.c"
+  "${TOP}/src/device/usbd_control.c"
+  "${TOP}/src/class/cdc/cdc_device.c"
+  "${TOP}/src/class/dfu/dfu_rt_device.c"
+  "${TOP}/src/class/hid/hid_device.c"
+  "${TOP}/src/class/midi/midi_device.c"
+  "${TOP}/src/class/msc/msc_device.c"
+  "${TOP}/src/class/net/ecm_rndis_device.c"
+  "${TOP}/src/class/net/ncm_device.c"
+  "${TOP}/src/class/usbtmc/usbtmc_device.c"
+  "${TOP}/src/class/vendor/vendor_device.c"
+  "${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c"
+)

Firmware/Core/tinyusb/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h

@@ -0,0 +1,206 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+
+// Include MCU header
+#include "bsp/board_mcu.h"
+
+#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3
+  #error "ESP32-Sx should use IDF's FreeRTOSConfig.h"
+#endif
+
+// TODO fix later
+#if CFG_TUSB_MCU == OPT_MCU_MM32F327X
+  extern u32 SystemCoreClock;
+#else
+  // FIXME cause redundant-decls warnings
+  extern uint32_t SystemCoreClock;
+#endif
+
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU								        0
+#define configENABLE_FPU								        1
+#define configENABLE_TRUSTZONE					        0
+#define configMINIMAL_SECURE_STACK_SIZE					( 1024 )
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               2
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         1
+#define configSUPPORT_DYNAMIC_ALLOCATION        0
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      0
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+/* Define to trap errors during development. */
+// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
+#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
+  #define configASSERT(_exp) \
+    do {\
+      if ( !(_exp) ) { \
+        volatile uint32_t* ARM_CM_DHCSR =  ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
+        if ( (*ARM_CM_DHCSR) & 1UL ) {  /* Only halt mcu if debugger is attached */ \
+          taskDISABLE_INTERRUPTS(); \
+           __asm("BKPT #0\n"); \
+        }\
+      }\
+    } while(0)
+#else
+  #define configASSERT( x )
+#endif
+
+#ifdef __RX__
+/* Renesas RX series */
+#define vSoftwareInterruptISR					        INT_Excep_ICU_SWINT
+#define vTickISR								              INT_Excep_CMT0_CMI0
+#define configPERIPHERAL_CLOCK_HZ				      (configCPU_CLOCK_HZ/2)
+#define configKERNEL_INTERRUPT_PRIORITY			  1
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY	4
+
+#else
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+#if defined(__NVIC_PRIO_BITS)
+  // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h
+	#define configPRIO_BITS       __NVIC_PRIO_BITS
+
+#elif defined(__ECLIC_INTCTLBITS)
+  // RISC-V Bumblebee core from nuclei
+  #define configPRIO_BITS       __ECLIC_INTCTLBITS
+
+#elif defined(__IASMARM__)
+  // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS.
+  // Therefore we will hard coded it to minimum value of 2 to get pass ci build.
+  // IAR user must update this to correct value of the target MCU
+  #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU"
+  #define configPRIO_BITS       2
+
+#else
+  #error "FreeRTOS configPRIO_BITS to be defined"
+#endif
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
+
+#endif /* __FREERTOS_CONFIG__H */

Firmware/Core/tinyusb/examples/device/cdc_msc_freertos/src/freertos_hook.c

@@ -0,0 +1,114 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+//--------------------------------------------------------------------+
+// INCLUDE
+//--------------------------------------------------------------------+
+#include "FreeRTOS.h"
+#include "task.h"
+#include "common/tusb_common.h"
+
+
+void vApplicationMallocFailedHook(void)
+{
+  taskDISABLE_INTERRUPTS();
+  TU_ASSERT(false, );
+}
+
+void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName)
+{
+  (void) pxTask;
+  (void) pcTaskName;
+
+  taskDISABLE_INTERRUPTS();
+  TU_ASSERT(false, );
+}
+
+/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an
+ * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is
+ * used by the Idle task. */
+void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize )
+{
+  /* If the buffers to be provided to the Idle task are declared inside this
+   * function then they must be declared static - otherwise they will be allocated on
+   * the stack and so not exists after this function exits. */
+  static StaticTask_t xIdleTaskTCB;
+  static StackType_t uxIdleTaskStack[ configMINIMAL_STACK_SIZE ];
+
+  /* Pass out a pointer to the StaticTask_t structure in which the Idle task's
+    state will be stored. */
+  *ppxIdleTaskTCBBuffer = &xIdleTaskTCB;
+
+  /* Pass out the array that will be used as the Idle task's stack. */
+  *ppxIdleTaskStackBuffer = uxIdleTaskStack;
+
+  /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer.
+    Note that, as the array is necessarily of type StackType_t,
+    configMINIMAL_STACK_SIZE is specified in words, not bytes. */
+  *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE;
+}
+
+/* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the
+ * application must provide an implementation of vApplicationGetTimerTaskMemory()
+ * to provide the memory that is used by the Timer service task. */
+void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize )
+{
+  /* If the buffers to be provided to the Timer task are declared inside this
+   * function then they must be declared static - otherwise they will be allocated on
+   * the stack and so not exists after this function exits. */
+  static StaticTask_t xTimerTaskTCB;
+  static StackType_t uxTimerTaskStack[ configTIMER_TASK_STACK_DEPTH ];
+
+  /* Pass out a pointer to the StaticTask_t structure in which the Timer
+    task's state will be stored. */
+  *ppxTimerTaskTCBBuffer = &xTimerTaskTCB;
+
+  /* Pass out the array that will be used as the Timer task's stack. */
+  *ppxTimerTaskStackBuffer = uxTimerTaskStack;
+
+  /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer.
+    Note that, as the array is necessarily of type StackType_t,
+    configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */
+  *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH;
+}
+
+#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X
+#include "iodefine.h"
+void vApplicationSetupTimerInterrupt(void)
+{
+  /* Enable CMT0 */
+  SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1);
+  MSTP(CMT0)       = 0;
+  SYSTEM.PRCR.WORD = (0xA5u<<8);
+
+  CMT0.CMCNT      = 0;
+  CMT0.CMCOR      = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128);
+  CMT0.CMCR.WORD  = TU_BIT(6) | 2;
+  IR(CMT0, CMI0)  = 0;
+  IPR(CMT0, CMI0) = configKERNEL_INTERRUPT_PRIORITY;
+  IEN(CMT0, CMI0) = 1;
+  CMT.CMSTR0.BIT.STR0 = 1;
+}
+#endif

Firmware/Core/tinyusb/examples/device/cdc_msc_freertos/src/main.c

@@ -0,0 +1,251 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
+  // ESP-IDF need "freertos/" prefix in include path.
+  // CFG_TUSB_OS_INC_PATH should be defined accordingly.
+  #include "freertos/FreeRTOS.h"
+  #include "freertos/semphr.h"
+  #include "freertos/queue.h"
+  #include "freertos/task.h"
+  #include "freertos/timers.h"
+
+  #define USBD_STACK_SIZE     4096
+#else
+  #include "FreeRTOS.h"
+  #include "semphr.h"
+  #include "queue.h"
+  #include "task.h"
+  #include "timers.h"
+
+  // Increase stack size when debug log is enabled
+  #define USBD_STACK_SIZE    (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1)
+#endif
+
+#define CDC_STACK_SZIE      configMINIMAL_STACK_SIZE
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+
+/* Blink pattern
+ * - 250 ms  : device not mounted
+ * - 1000 ms : device mounted
+ * - 2500 ms : device is suspended
+ */
+enum  {
+  BLINK_NOT_MOUNTED = 250,
+  BLINK_MOUNTED = 1000,
+  BLINK_SUSPENDED = 2500,
+};
+
+// static timer & task
+#if configSUPPORT_STATIC_ALLOCATION
+StaticTimer_t blinky_tmdef;
+
+StackType_t  usb_device_stack[USBD_STACK_SIZE];
+StaticTask_t usb_device_taskdef;
+
+StackType_t  cdc_stack[CDC_STACK_SZIE];
+StaticTask_t cdc_taskdef;
+#endif
+
+TimerHandle_t blinky_tm;
+
+void led_blinky_cb(TimerHandle_t xTimer);
+void usb_device_task(void* param);
+void cdc_task(void* params);
+
+//--------------------------------------------------------------------+
+// Main
+//--------------------------------------------------------------------+
+
+int main(void)
+{
+  board_init();
+
+#if configSUPPORT_STATIC_ALLOCATION
+  // soft timer for blinky
+  blinky_tm = xTimerCreateStatic(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb, &blinky_tmdef);
+
+  // Create a task for tinyusb device stack
+  xTaskCreateStatic(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_device_stack, &usb_device_taskdef);
+
+  // Create CDC task
+  xTaskCreateStatic(cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, cdc_stack, &cdc_taskdef);
+#else
+  blinky_tm = xTimerCreate(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb);
+  xTaskCreate( usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, NULL);
+  xTaskCreate( cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, NULL);
+#endif
+
+  xTimerStart(blinky_tm, 0);
+
+  // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
+#if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
+  vTaskStartScheduler();
+#endif
+
+  return 0;
+}
+
+#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
+void app_main(void)
+{
+  main();
+}
+#endif
+
+// USB Device Driver task
+// This top level thread process all usb events and invoke callbacks
+void usb_device_task(void* param)
+{
+  (void) param;
+
+  // init device stack on configured roothub port
+  // This should be called after scheduler/kernel is started.
+  // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API.
+  tud_init(BOARD_TUD_RHPORT);
+
+  // RTOS forever loop
+  while (1)
+  {
+    // put this thread to waiting state until there is new events
+    tud_task();
+
+    // following code only run if tud_task() process at least 1 event
+    tud_cdc_write_flush();
+  }
+}
+
+//--------------------------------------------------------------------+
+// Device callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when device is mounted
+void tud_mount_cb(void)
+{
+  xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_MOUNTED), 0);
+}
+
+// Invoked when device is unmounted
+void tud_umount_cb(void)
+{
+  xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), 0);
+}
+
+// Invoked when usb bus is suspended
+// remote_wakeup_en : if host allow us  to perform remote wakeup
+// Within 7ms, device must draw an average of current less than 2.5 mA from bus
+void tud_suspend_cb(bool remote_wakeup_en)
+{
+  (void) remote_wakeup_en;
+  xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_SUSPENDED), 0);
+}
+
+// Invoked when usb bus is resumed
+void tud_resume_cb(void)
+{
+  xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_MOUNTED), 0);
+}
+
+//--------------------------------------------------------------------+
+// USB CDC
+//--------------------------------------------------------------------+
+void cdc_task(void* params)
+{
+  (void) params;
+
+  // RTOS forever loop
+  while ( 1 )
+  {
+    // connected() check for DTR bit
+    // Most but not all terminal client set this when making connection
+    // if ( tud_cdc_connected() )
+    {
+      // There are data available
+      while ( tud_cdc_available() )
+      {
+        uint8_t buf[64];
+
+        // read and echo back
+        uint32_t count = tud_cdc_read(buf, sizeof(buf));
+        (void) count;
+
+        // Echo back
+        // Note: Skip echo by commenting out write() and write_flush()
+        // for throughput test e.g
+        //    $ dd if=/dev/zero of=/dev/ttyACM0 count=10000
+        tud_cdc_write(buf, count);
+      }
+
+      tud_cdc_write_flush();
+    }
+
+    // For ESP32-Sx this delay is essential to allow idle how to run and reset watchdog
+    vTaskDelay(1);
+  }
+}
+
+// Invoked when cdc when line state changed e.g connected/disconnected
+void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts)
+{
+  (void) itf;
+  (void) rts;
+
+  // TODO set some indicator
+  if ( dtr )
+  {
+    // Terminal connected
+  }else
+  {
+    // Terminal disconnected
+  }
+}
+
+// Invoked when CDC interface received data from host
+void tud_cdc_rx_cb(uint8_t itf)
+{
+  (void) itf;
+}
+
+//--------------------------------------------------------------------+
+// BLINKING TASK
+//--------------------------------------------------------------------+
+void led_blinky_cb(TimerHandle_t xTimer)
+{
+  (void) xTimer;
+  static bool led_state = false;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}

Firmware/Core/tinyusb/examples/device/cdc_msc_freertos/src/msc_disk.c

@@ -0,0 +1,250 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+#if CFG_TUD_MSC
+
+// Some MCU doesn't have enough 8KB SRAM to store the whole disk
+// We will use Flash as read-only disk with board that has
+// CFG_EXAMPLE_MSC_READONLY defined
+
+#define README_CONTENTS \
+"This is tinyusb's MassStorage Class demo.\r\n\r\n\
+If you find any bugs or get any questions, feel free to file an\r\n\
+issue at github.com/hathach/tinyusb"
+
+enum
+{
+  DISK_BLOCK_NUM  = 16, // 8KB is the smallest size that windows allow to mount
+  DISK_BLOCK_SIZE = 512
+};
+
+#ifdef CFG_EXAMPLE_MSC_READONLY
+const
+#endif
+uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
+{
+  //------------- Block0: Boot Sector -------------//
+  // byte_per_sector    = DISK_BLOCK_SIZE; fat12_sector_num_16  = DISK_BLOCK_NUM;
+  // sector_per_cluster = 1; reserved_sectors = 1;
+  // fat_num            = 1; fat12_root_entry_num = 16;
+  // sector_per_fat     = 1; sector_per_track = 1; head_num = 1; hidden_sectors = 0;
+  // drive_number       = 0x80; media_type = 0xf8; extended_boot_signature = 0x29;
+  // filesystem_type    = "FAT12   "; volume_serial_number = 0x1234; volume_label = "TinyUSB MSC";
+  // FAT magic code at offset 510-511
+  {
+      0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00,
+      0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T' , 'i' , 'n' , 'y' , 'U' ,
+      'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00,
+
+      // Zero up to 2 last bytes of FAT magic code
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA
+  },
+
+  //------------- Block1: FAT12 Table -------------//
+  {
+      0xF8, 0xFF, 0xFF, 0xFF, 0x0F // // first 2 entries must be F8FF, third entry is cluster end of readme file
+  },
+
+  //------------- Block2: Root Directory -------------//
+  {
+      // first entry is volume label
+      'T' , 'i' , 'n' , 'y' , 'U' , 'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x08, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      // second entry is readme file
+      'R' , 'E' , 'A' , 'D' , 'M' , 'E' , ' ' , ' ' , 'T' , 'X' , 'T' , 0x20, 0x00, 0xC6, 0x52, 0x6D,
+      0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00,
+      sizeof(README_CONTENTS)-1, 0x00, 0x00, 0x00 // readme's files size (4 Bytes)
+  },
+
+  //------------- Block3: Readme Content -------------//
+  README_CONTENTS
+};
+
+// Invoked when received SCSI_CMD_INQUIRY
+// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively
+void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4])
+{
+  (void) lun;
+
+  const char vid[] = "TinyUSB";
+  const char pid[] = "Mass Storage";
+  const char rev[] = "1.0";
+
+  memcpy(vendor_id  , vid, strlen(vid));
+  memcpy(product_id , pid, strlen(pid));
+  memcpy(product_rev, rev, strlen(rev));
+}
+
+// Invoked when received Test Unit Ready command.
+// return true allowing host to read/write this LUN e.g SD card inserted
+bool tud_msc_test_unit_ready_cb(uint8_t lun)
+{
+  (void) lun;
+
+  return true; // RAM disk is always ready
+}
+
+// Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size
+// Application update block count and block size
+void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size)
+{
+  (void) lun;
+
+  *block_count = DISK_BLOCK_NUM;
+  *block_size  = DISK_BLOCK_SIZE;
+}
+
+// Invoked when received Start Stop Unit command
+// - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage
+// - Start = 1 : active mode, if load_eject = 1 : load disk storage
+bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject)
+{
+  (void) lun;
+  (void) power_condition;
+
+  if ( load_eject )
+  {
+    if (start)
+    {
+      // load disk storage
+    }else
+    {
+      // unload disk storage
+    }
+  }
+
+  return true;
+}
+
+// Callback invoked when received READ10 command.
+// Copy disk's data to buffer (up to bufsize) and return number of copied bytes.
+int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize)
+{
+  (void) lun;
+
+  // out of ramdisk
+  if ( lba >= DISK_BLOCK_NUM ) return -1;
+
+  uint8_t const* addr = msc_disk[lba] + offset;
+  memcpy(buffer, addr, bufsize);
+
+  return bufsize;
+}
+
+// Callback invoked when received WRITE10 command.
+// Process data in buffer to disk's storage and return number of written bytes
+int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize)
+{
+  (void) lun;
+
+  // out of ramdisk
+  if ( lba >= DISK_BLOCK_NUM ) return -1;
+
+#ifndef CFG_EXAMPLE_MSC_READONLY
+  uint8_t* addr = msc_disk[lba] + offset;
+  memcpy(addr, buffer, bufsize);
+#else
+  (void) lba; (void) offset; (void) buffer;
+#endif
+
+  return bufsize;
+}
+
+// Callback invoked when received an SCSI command not in built-in list below
+// - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE
+// - READ10 and WRITE10 has their own callbacks
+int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize)
+{
+  // read10 & write10 has their own callback and MUST not be handled here
+
+  void const* response = NULL;
+  int32_t resplen = 0;
+
+  // most scsi handled is input
+  bool in_xfer = true;
+
+  switch (scsi_cmd[0])
+  {
+    default:
+      // Set Sense = Invalid Command Operation
+      tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
+
+      // negative means error -> tinyusb could stall and/or response with failed status
+      resplen = -1;
+    break;
+  }
+
+  // return resplen must not larger than bufsize
+  if ( resplen > bufsize ) resplen = bufsize;
+
+  if ( response && (resplen > 0) )
+  {
+    if(in_xfer)
+    {
+      memcpy(buffer, response, resplen);
+    }else
+    {
+      // SCSI output
+    }
+  }
+
+  return resplen;
+}
+
+#endif

Firmware/Core/tinyusb/examples/device/cdc_msc_freertos/src/tusb_config.h

@@ -0,0 +1,119 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT     0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by board.mk
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
+#endif
+
+// This examples use FreeRTOS
+#define CFG_TUSB_OS           OPT_OS_FREERTOS
+
+// Espressif IDF requires "freertos/" prefix in include path
+#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
+#define CFG_TUSB_OS_INC_PATH  freertos/
+#endif
+
+// can be defined by compiler in DEBUG build
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN    __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE   64
+#endif
+
+//------------- CLASS -------------//
+#define CFG_TUD_CDC              1
+#define CFG_TUD_MSC              1
+#define CFG_TUD_HID              0
+#define CFG_TUD_MIDI             0
+#define CFG_TUD_VENDOR           0
+
+// CDC FIFO size of TX and RX
+#define CFG_TUD_CDC_RX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
+#define CFG_TUD_CDC_TX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
+
+// CDC Endpoint transfer buffer size, more is faster
+#define CFG_TUD_CDC_EP_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
+
+// MSC Buffer size of Device Mass storage
+#define CFG_TUD_MSC_EP_BUFSIZE   512
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */

Firmware/Core/tinyusb/examples/device/cdc_msc_freertos/src/usb_descriptors.c

@@ -0,0 +1,264 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "tusb.h"
+
+/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
+ * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
+ *
+ * Auto ProductID layout's Bitmap:
+ *   [MSB]         HID | MSC | CDC          [LSB]
+ */
+#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
+#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
+                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
+
+#define USB_VID   0xCafe
+#define USB_BCD   0x0200
+
+//--------------------------------------------------------------------+
+// Device Descriptors
+//--------------------------------------------------------------------+
+tusb_desc_device_t const desc_device =
+{
+    .bLength            = sizeof(tusb_desc_device_t),
+    .bDescriptorType    = TUSB_DESC_DEVICE,
+    .bcdUSB             = USB_BCD,
+
+    // Use Interface Association Descriptor (IAD) for CDC
+    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
+    .bDeviceClass       = TUSB_CLASS_MISC,
+    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
+    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
+
+    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+
+    .idVendor           = USB_VID,
+    .idProduct          = USB_PID,
+    .bcdDevice          = 0x0100,
+
+    .iManufacturer      = 0x01,
+    .iProduct           = 0x02,
+    .iSerialNumber      = 0x03,
+
+    .bNumConfigurations = 0x01
+};
+
+// Invoked when received GET DEVICE DESCRIPTOR
+// Application return pointer to descriptor
+uint8_t const * tud_descriptor_device_cb(void)
+{
+  return (uint8_t const *) &desc_device;
+}
+
+//--------------------------------------------------------------------+
+// Configuration Descriptor
+//--------------------------------------------------------------------+
+
+enum
+{
+  ITF_NUM_CDC = 0,
+  ITF_NUM_CDC_DATA,
+  ITF_NUM_MSC,
+  ITF_NUM_TOTAL
+};
+
+#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
+  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
+  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ...
+  #define EPNUM_CDC_NOTIF   0x81
+  #define EPNUM_CDC_OUT     0x02
+  #define EPNUM_CDC_IN      0x82
+
+  #define EPNUM_MSC_OUT     0x05
+  #define EPNUM_MSC_IN      0x85
+
+#elif CFG_TUSB_MCU == OPT_MCU_SAMG
+  // SAMG doesn't support a same endpoint number with different direction IN and OUT
+  //    e.g EP1 OUT & EP1 IN cannot exist together
+  #define EPNUM_CDC_NOTIF   0x81
+  #define EPNUM_CDC_OUT     0x02
+  #define EPNUM_CDC_IN      0x83
+
+  #define EPNUM_MSC_OUT     0x04
+  #define EPNUM_MSC_IN      0x85
+
+#else
+  #define EPNUM_CDC_NOTIF   0x81
+  #define EPNUM_CDC_OUT     0x02
+  #define EPNUM_CDC_IN      0x82
+
+  #define EPNUM_MSC_OUT     0x03
+  #define EPNUM_MSC_IN      0x83
+
+#endif
+
+#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MSC_DESC_LEN)
+
+uint8_t const desc_fs_configuration[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
+
+  // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
+  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64),
+
+  // Interface number, string index, EP Out & EP In address, EP size
+  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64),
+};
+
+#if TUD_OPT_HIGH_SPEED
+// Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration
+
+// high speed configuration
+uint8_t const desc_hs_configuration[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
+
+  // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
+  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512),
+
+  // Interface number, string index, EP Out & EP In address, EP size
+  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512),
+};
+
+// other speed configuration
+uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN];
+
+// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed
+tusb_desc_device_qualifier_t const desc_device_qualifier =
+{
+  .bLength            = sizeof(tusb_desc_device_qualifier_t),
+  .bDescriptorType    = TUSB_DESC_DEVICE_QUALIFIER,
+  .bcdUSB             = USB_BCD,
+
+  .bDeviceClass       = TUSB_CLASS_MISC,
+  .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
+  .bDeviceProtocol    = MISC_PROTOCOL_IAD,
+
+  .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+  .bNumConfigurations = 0x01,
+  .bReserved          = 0x00
+};
+
+// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete.
+// device_qualifier descriptor describes information about a high-speed capable device that would
+// change if the device were operating at the other speed. If not highspeed capable stall this request.
+uint8_t const* tud_descriptor_device_qualifier_cb(void)
+{
+  return (uint8_t const*) &desc_device_qualifier;
+}
+
+// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa
+uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+
+  // if link speed is high return fullspeed config, and vice versa
+  // Note: the descriptor type is OHER_SPEED_CONFIG instead of CONFIG
+  memcpy(desc_other_speed_config,
+         (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_fs_configuration : desc_hs_configuration,
+         CONFIG_TOTAL_LEN);
+
+  desc_other_speed_config[1] = TUSB_DESC_OTHER_SPEED_CONFIG;
+
+  return desc_other_speed_config;
+}
+
+#endif // highspeed
+
+// Invoked when received GET CONFIGURATION DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+
+#if TUD_OPT_HIGH_SPEED
+  // Although we are highspeed, host may be fullspeed.
+  return (tud_speed_get() == TUSB_SPEED_HIGH) ?  desc_hs_configuration : desc_fs_configuration;
+#else
+  return desc_fs_configuration;
+#endif
+}
+
+//--------------------------------------------------------------------+
+// String Descriptors
+//--------------------------------------------------------------------+
+
+// array of pointer to string descriptors
+char const* string_desc_arr [] =
+{
+  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
+  "TinyUSB",                     // 1: Manufacturer
+  "TinyUSB Device",              // 2: Product
+  "123456789012",                // 3: Serials, should use chip ID
+  "TinyUSB CDC",                 // 4: CDC Interface
+  "TinyUSB MSC",                 // 5: MSC Interface
+};
+
+static uint16_t _desc_str[32];
+
+// Invoked when received GET STRING DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
+{
+  (void) langid;
+
+  uint8_t chr_count;
+
+  if ( index == 0)
+  {
+    memcpy(&_desc_str[1], string_desc_arr[0], 2);
+    chr_count = 1;
+  }else
+  {
+    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
+    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
+
+    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
+
+    const char* str = string_desc_arr[index];
+
+    // Cap at max char
+    chr_count = (uint8_t) strlen(str);
+    if ( chr_count > 31 ) chr_count = 31;
+
+    // Convert ASCII string into UTF-16
+    for(uint8_t i=0; i<chr_count; i++)
+    {
+      _desc_str[1+i] = str[i];
+    }
+  }
+
+  // first byte is length (including header), second byte is string type
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
+
+  return _desc_str;
+}

Firmware/Core/tinyusb/examples/device/dfu/CMakeLists.txt

@@ -0,0 +1,28 @@
+cmake_minimum_required(VERSION 3.5)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT})
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
+        )
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src
+        )
+
+# Configure compilation flags and libraries for the example... see the corresponding function
+# in hw/bsp/FAMILY/family.cmake for details.
+family_configure_device_example(${PROJECT})

Firmware/Core/tinyusb/examples/device/dfu/Makefile

@@ -0,0 +1,15 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+INC += \
+	src \
+	$(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE = \
+	src/main.c \
+	src/usb_descriptors.c
+
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+include ../../rules.mk

Firmware/Core/tinyusb/examples/device/dfu/skip.txt

@@ -0,0 +1,2 @@
+mcu:TM4C123
+mcu:BCM2835

Firmware/Core/tinyusb/examples/device/dfu/src/main.c

@@ -0,0 +1,220 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+ /*
+  * After device is enumerated in dfu mode run the following commands
+  *
+  * To transfer firmware from host to device (best to test with text file)
+  *
+  * $ dfu-util -d cafe -a 0 -D [filename]
+  * $ dfu-util -d cafe -a 1 -D [filename]
+  *
+  * To transfer firmware from device to host:
+  *
+  * $ dfu-util -d cafe -a 0 -U [filename]
+  * $ dfu-util -d cafe -a 1 -U [filename]
+  *
+  */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+const char* upload_image[2]=
+{
+  "Hello world from TinyUSB DFU! - Partition 0",
+  "Hello world from TinyUSB DFU! - Partition 1"
+};
+
+/* Blink pattern
+ * - 250 ms  : device not mounted
+ * - 1000 ms : device mounted
+ * - 2500 ms : device is suspended
+ */
+enum  {
+  BLINK_NOT_MOUNTED = 250,
+  BLINK_MOUNTED = 1000,
+  BLINK_SUSPENDED = 2500,
+};
+
+static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
+
+void led_blinking_task(void);
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+  board_init();
+
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
+
+  while (1)
+  {
+    tud_task(); // tinyusb device task
+    led_blinking_task();
+  }
+
+  return 0;
+}
+
+//--------------------------------------------------------------------+
+// Device callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when device is mounted
+void tud_mount_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+// Invoked when device is unmounted
+void tud_umount_cb(void)
+{
+  blink_interval_ms = BLINK_NOT_MOUNTED;
+}
+
+// Invoked when usb bus is suspended
+// remote_wakeup_en : if host allow us  to perform remote wakeup
+// Within 7ms, device must draw an average of current less than 2.5 mA from bus
+void tud_suspend_cb(bool remote_wakeup_en)
+{
+  (void) remote_wakeup_en;
+  blink_interval_ms = BLINK_SUSPENDED;
+}
+
+// Invoked when usb bus is resumed
+void tud_resume_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+//--------------------------------------------------------------------+
+// DFU callbacks
+// Note: alt is used as the partition number, in order to support multiple partitions like FLASH, EEPROM, etc.
+//--------------------------------------------------------------------+
+
+// Invoked right before tud_dfu_download_cb() (state=DFU_DNBUSY) or tud_dfu_manifest_cb() (state=DFU_MANIFEST)
+// Application return timeout in milliseconds (bwPollTimeout) for the next download/manifest operation.
+// During this period, USB host won't try to communicate with us.
+uint32_t tud_dfu_get_timeout_cb(uint8_t alt, uint8_t state)
+{
+  if ( state == DFU_DNBUSY )
+  {
+    // For this example
+    // - Atl0 Flash is fast : 1   ms
+    // - Alt1 EEPROM is slow: 100 ms
+    return (alt == 0) ? 1 : 100;
+  }
+  else if (state == DFU_MANIFEST)
+  {
+    // since we don't buffer entire image and do any flashing in manifest stage
+    return 0;
+  }
+
+  return 0;
+}
+
+// Invoked when received DFU_DNLOAD (wLength>0) following by DFU_GETSTATUS (state=DFU_DNBUSY) requests
+// This callback could be returned before flashing op is complete (async).
+// Once finished flashing, application must call tud_dfu_finish_flashing()
+void tud_dfu_download_cb(uint8_t alt, uint16_t block_num, uint8_t const* data, uint16_t length)
+{
+  (void) alt;
+  (void) block_num;
+
+  //printf("\r\nReceived Alt %u BlockNum %u of length %u\r\n", alt, wBlockNum, length);
+
+  for(uint16_t i=0; i<length; i++)
+  {
+    printf("%c", data[i]);
+  }
+
+  // flashing op for download complete without error
+  tud_dfu_finish_flashing(DFU_STATUS_OK);
+}
+
+// Invoked when download process is complete, received DFU_DNLOAD (wLength=0) following by DFU_GETSTATUS (state=Manifest)
+// Application can do checksum, or actual flashing if buffered entire image previously.
+// Once finished flashing, application must call tud_dfu_finish_flashing()
+void tud_dfu_manifest_cb(uint8_t alt)
+{
+  (void) alt;
+  printf("Download completed, enter manifestation\r\n");
+
+  // flashing op for manifest is complete without error
+  // Application can perform checksum, should it fail, use appropriate status such as errVERIFY.
+  tud_dfu_finish_flashing(DFU_STATUS_OK);
+}
+
+// Invoked when received DFU_UPLOAD request
+// Application must populate data with up to length bytes and
+// Return the number of written bytes
+uint16_t tud_dfu_upload_cb(uint8_t alt, uint16_t block_num, uint8_t* data, uint16_t length)
+{
+  (void) block_num;
+  (void) length;
+
+  uint16_t const xfer_len = (uint16_t) strlen(upload_image[alt]);
+  memcpy(data, upload_image[alt], xfer_len);
+
+  return xfer_len;
+}
+
+// Invoked when the Host has terminated a download or upload transfer
+void tud_dfu_abort_cb(uint8_t alt)
+{
+  (void) alt;
+  printf("Host aborted transfer\r\n");
+}
+
+// Invoked when a DFU_DETACH request is received
+void tud_dfu_detach_cb(void)
+{
+  printf("Host detach, we should probably reboot\r\n");
+}
+
+//--------------------------------------------------------------------+
+// BLINKING TASK + Indicator pulse
+//--------------------------------------------------------------------+
+
+void led_blinking_task(void)
+{
+  static uint32_t start_ms = 0;
+  static bool led_state = false;
+
+  // Blink every interval ms
+  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
+  start_ms += blink_interval_ms;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}

Firmware/Core/tinyusb/examples/device/dfu/src/tusb_config.h

@@ -0,0 +1,85 @@
+/*
+ * tusb_config.h
+ *
+ *  Created on: May 5, 2021
+ *      Author: Jeremiah McCarthy
+ */
+
+#ifndef TUSB_CONFIG_H_
+#define TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS           OPT_OS_NONE
+#endif
+
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE    64
+#endif
+
+//------------- CLASS -------------//
+#define CFG_TUD_DFU               1
+
+// DFU buffer size, it has to be set to the buffer size used in TUD_DFU_DESCRIPTOR
+#define CFG_TUD_DFU_XFER_BUFSIZE  (TUD_OPT_HIGH_SPEED ? 512 : 64)
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* TUSB_CONFIG_H_ */

Firmware/Core/tinyusb/examples/device/dfu/src/usb_descriptors.c

@@ -0,0 +1,171 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "tusb.h"
+#include "class/dfu/dfu_device.h"
+
+/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
+ * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
+ *
+ * Auto ProductID layout's Bitmap:
+ *   [MSB]         HID | MSC | CDC          [LSB]
+ */
+#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
+#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
+                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
+
+//--------------------------------------------------------------------+
+// Device Descriptors
+//--------------------------------------------------------------------+
+tusb_desc_device_t const desc_device =
+{
+    .bLength            = sizeof(tusb_desc_device_t),
+    .bDescriptorType    = TUSB_DESC_DEVICE,
+    .bcdUSB             = 0x0200,
+
+  #if CFG_TUD_CDC
+    // Use Interface Association Descriptor (IAD) for CDC
+    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
+    .bDeviceClass       = TUSB_CLASS_MISC,
+    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
+    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
+  #else
+    .bDeviceClass       = 0x00,
+    .bDeviceSubClass    = 0x00,
+    .bDeviceProtocol    = 0x00,
+  #endif
+
+    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+
+    .idVendor           = 0xCafe,
+    .idProduct          = USB_PID,
+    .bcdDevice          = 0x0100,
+
+    .iManufacturer      = 0x01,
+    .iProduct           = 0x02,
+    .iSerialNumber      = 0x03,
+
+    .bNumConfigurations = 0x01
+};
+
+// Invoked when received GET DEVICE DESCRIPTOR
+// Application return pointer to descriptor
+uint8_t const * tud_descriptor_device_cb(void)
+{
+  return (uint8_t const *) &desc_device;
+}
+
+//--------------------------------------------------------------------+
+// Configuration Descriptor
+//--------------------------------------------------------------------+
+
+// Number of Alternate Interface (each for 1 flash partition)
+#define ALT_COUNT   2
+
+enum
+{
+  ITF_NUM_DFU_MODE,
+  ITF_NUM_TOTAL
+};
+
+#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_DFU_DESC_LEN(ALT_COUNT))
+
+#define FUNC_ATTRS (DFU_ATTR_CAN_UPLOAD | DFU_ATTR_CAN_DOWNLOAD | DFU_ATTR_MANIFESTATION_TOLERANT)
+
+uint8_t const desc_configuration[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
+
+  // Interface number, Alternate count, starting string index, attributes, detach timeout, transfer size
+  TUD_DFU_DESCRIPTOR(ITF_NUM_DFU_MODE, ALT_COUNT, 4, FUNC_ATTRS, 1000, CFG_TUD_DFU_XFER_BUFSIZE),
+};
+
+// Invoked when received GET CONFIGURATION DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+  return desc_configuration;
+}
+
+//--------------------------------------------------------------------+
+// String Descriptors
+//--------------------------------------------------------------------+
+
+// array of pointer to string descriptors
+char const* string_desc_arr [] =
+{
+  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
+  "TinyUSB",                     // 1: Manufacturer
+  "TinyUSB Device",              // 2: Product
+  "123456",                      // 3: Serials, should use chip ID
+  "FLASH",                       // 4: DFU Partition 1
+  "EEPROM",                      // 5: DFU Partition 2
+};
+
+static uint16_t _desc_str[32];
+
+// Invoked when received GET STRING DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
+{
+  (void) langid;
+
+  size_t chr_count;
+
+  if ( index == 0)
+  {
+    memcpy(&_desc_str[1], string_desc_arr[0], 2);
+    chr_count = 1;
+  }
+  else
+  {
+    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
+    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
+
+    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
+
+    const char* str = string_desc_arr[index];
+
+    // Cap at max char
+    chr_count = (uint8_t) strlen(str);
+    if ( chr_count > 31 ) {
+      chr_count = 31;
+    }
+
+    // Convert ASCII string into UTF-16
+    for(uint8_t i=0; i<chr_count; i++)
+    {
+      _desc_str[1+i] = str[i];
+    }
+  }
+
+  // first byte is length (including header), second byte is string type
+  _desc_str[0] = (uint16_t)((((uint16_t)TUSB_DESC_STRING) << 8 ) | (2u*chr_count + 2u));
+
+  return _desc_str;
+}

Firmware/Core/tinyusb/examples/device/dfu_runtime/CMakeLists.txt

@@ -0,0 +1,28 @@
+cmake_minimum_required(VERSION 3.5)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT})
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
+        )
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src
+        )
+
+# Configure compilation flags and libraries for the example... see the corresponding function
+# in hw/bsp/FAMILY/family.cmake for details.
+family_configure_device_example(${PROJECT})

Firmware/Core/tinyusb/examples/device/dfu_runtime/Makefile

@@ -0,0 +1,12 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+INC += \
+	src \
+	$(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE += $(wildcard src/*.c)
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+include ../../rules.mk

Firmware/Core/tinyusb/examples/device/dfu_runtime/src/main.c

@@ -0,0 +1,136 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+/* After device is enumerated, run following command
+ *
+ * $ dfu-util -l
+ *
+ * It should be able to list our device as in Runtime mode. Then run
+ *
+ * $ dfu-util -e
+ *
+ * This will send DETACH command to put device into bootloader. Since this example
+ * is minimal, it doesn't actually go into DFU mode but rather change the LED blinking
+ * pattern to fast rate as indicator.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+
+/* Blink pattern
+ * - 1000 ms : device should reboot
+ * - 250 ms  : device not mounted
+ * - 0 ms : device mounted
+ * - 2500 ms : device is suspended
+ */
+enum  {
+  BLINK_DFU_MODE = 100,
+  BLINK_NOT_MOUNTED = 250,
+  BLINK_MOUNTED = 1000,
+  BLINK_SUSPENDED = 2500,
+};
+
+static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
+
+void led_blinking_task(void);
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+  board_init();
+
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
+
+  while (1)
+  {
+    tud_task(); // tinyusb device task
+    led_blinking_task();
+  }
+
+  return 0;
+}
+
+//--------------------------------------------------------------------+
+// Device callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when device is mounted
+void tud_mount_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+// Invoked when device is unmounted
+void tud_umount_cb(void)
+{
+  blink_interval_ms = BLINK_NOT_MOUNTED;
+}
+
+// Invoked when usb bus is suspended
+// remote_wakeup_en : if host allow us  to perform remote wakeup
+// Within 7ms, device must draw an average of current less than 2.5 mA from bus
+void tud_suspend_cb(bool remote_wakeup_en)
+{
+  (void) remote_wakeup_en;
+  blink_interval_ms = BLINK_SUSPENDED;
+}
+
+// Invoked when usb bus is resumed
+void tud_resume_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+// Invoked on DFU_DETACH request to reboot to the bootloader
+void tud_dfu_runtime_reboot_to_dfu_cb(void)
+{
+  blink_interval_ms = BLINK_DFU_MODE;
+}
+
+//--------------------------------------------------------------------+
+// BLINKING TASK + Indicator pulse
+//--------------------------------------------------------------------+
+
+void led_blinking_task(void)
+{
+  static uint32_t start_ms = 0;
+  static bool led_state = false;
+
+  // Blink every interval ms
+  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
+  start_ms += blink_interval_ms;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}

Firmware/Core/tinyusb/examples/device/dfu_runtime/src/tusb_config.h

@@ -0,0 +1,83 @@
+/*
+ * tusb_config.h
+ *
+ *  Created on: Oct 28, 2019
+ *      Author: Sylvain Munaut
+ */
+
+#ifndef TUSB_CONFIG_H_
+#define TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS           OPT_OS_NONE
+#endif
+
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE    64
+#endif
+
+//------------- CLASS -------------//
+
+#define CFG_TUD_DFU_RUNTIME 1
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* TUSB_CONFIG_H_ */

Firmware/Core/tinyusb/examples/device/dfu_runtime/src/usb_descriptors.c

@@ -0,0 +1,166 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "tusb.h"
+#include "class/dfu/dfu_rt_device.h"
+
+/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
+ * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
+ *
+ * Auto ProductID layout's Bitmap:
+ *   [MSB]         HID | MSC | CDC          [LSB]
+ */
+#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
+#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
+                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
+
+//--------------------------------------------------------------------+
+// Device Descriptors
+//--------------------------------------------------------------------+
+tusb_desc_device_t const desc_device =
+{
+    .bLength            = sizeof(tusb_desc_device_t),
+    .bDescriptorType    = TUSB_DESC_DEVICE,
+    .bcdUSB             = 0x0200,
+
+  #if CFG_TUD_CDC
+    // Use Interface Association Descriptor (IAD) for CDC
+    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
+    .bDeviceClass       = TUSB_CLASS_MISC,
+    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
+    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
+  #else
+    .bDeviceClass       = 0x00,
+    .bDeviceSubClass    = 0x00,
+    .bDeviceProtocol    = 0x00,
+  #endif
+
+    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+
+    .idVendor           = 0xCafe,
+    .idProduct          = USB_PID,
+    .bcdDevice          = 0x0100,
+
+    .iManufacturer      = 0x01,
+    .iProduct           = 0x02,
+    .iSerialNumber      = 0x03,
+
+    .bNumConfigurations = 0x01
+};
+
+// Invoked when received GET DEVICE DESCRIPTOR
+// Application return pointer to descriptor
+uint8_t const * tud_descriptor_device_cb(void)
+{
+  return (uint8_t const *) &desc_device;
+}
+
+//--------------------------------------------------------------------+
+// Configuration Descriptor
+//--------------------------------------------------------------------+
+
+enum
+{
+  ITF_NUM_DFU_RT,
+  ITF_NUM_TOTAL
+};
+
+#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_DFU_RT_DESC_LEN)
+
+uint8_t const desc_configuration[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
+
+  // Interface number, string index, attributes, detach timeout, transfer size */
+  TUD_DFU_RT_DESCRIPTOR(ITF_NUM_DFU_RT, 4, 0x0d, 1000, 4096),
+};
+
+
+// Invoked when received GET CONFIGURATION DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+  return desc_configuration;
+}
+
+//--------------------------------------------------------------------+
+// String Descriptors
+//--------------------------------------------------------------------+
+
+// array of pointer to string descriptors
+char const* string_desc_arr [] =
+{
+  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
+  "TinyUSB",                     // 1: Manufacturer
+  "TinyUSB Device",              // 2: Product
+  "123456",                      // 3: Serials, should use chip ID
+  "TinyUSB DFU runtime",         // 4: DFU runtime
+};
+
+static uint16_t _desc_str[32];
+
+// Invoked when received GET STRING DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
+{
+  (void) langid;
+
+  size_t chr_count;
+
+  if ( index == 0)
+  {
+    memcpy(&_desc_str[1], string_desc_arr[0], 2);
+    chr_count = 1;
+  }
+  else
+  {
+    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
+    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
+
+    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
+
+    const char* str = string_desc_arr[index];
+
+    // Cap at max char
+    chr_count = (uint8_t) strlen(str);
+    if ( chr_count > 31 ) {
+      chr_count = 31;
+    }
+
+    // Convert ASCII string into UTF-16
+    for(uint8_t i=0; i<chr_count; i++)
+    {
+      _desc_str[1+i] = str[i];
+    }
+  }
+
+  // first byte is length (including header), second byte is string type
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
+
+  return _desc_str;
+}

Firmware/Core/tinyusb/examples/device/dynamic_configuration/CMakeLists.txt

@@ -0,0 +1,29 @@
+cmake_minimum_required(VERSION 3.5)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT})
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
+        )
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src
+        )
+
+# Configure compilation flags and libraries for the example... see the corresponding function
+# in hw/bsp/FAMILY/family.cmake for details.
+family_configure_device_example(${PROJECT})

Firmware/Core/tinyusb/examples/device/dynamic_configuration/Makefile

@@ -0,0 +1,12 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+INC += \
+	src \
+	$(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE += $(wildcard src/*.c)
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+include ../../rules.mk

Firmware/Core/tinyusb/examples/device/dynamic_configuration/skip.txt

@@ -0,0 +1 @@
+mcu:SAMD11

Firmware/Core/tinyusb/examples/device/dynamic_configuration/src/main.c

@@ -0,0 +1,219 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+
+/* Blink pattern
+ * - 250 ms  : device not mounted
+ * - 1000 ms : device mounted
+ * - 2500 ms : device is suspended
+ */
+enum  {
+  BLINK_NOT_MOUNTED = 250,
+  BLINK_MOUNTED = 1000,
+  BLINK_SUSPENDED = 2500,
+};
+
+static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
+
+void led_blinking_task(void);
+void cdc_task(void);
+void midi_task(void);
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+  board_init();
+
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
+
+  while (1)
+  {
+    tud_task(); // tinyusb device task
+    led_blinking_task();
+    cdc_task();
+    midi_task();
+  }
+
+  return 0;
+}
+
+//--------------------------------------------------------------------+
+// Device callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when device is mounted
+void tud_mount_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+// Invoked when device is unmounted
+void tud_umount_cb(void)
+{
+  blink_interval_ms = BLINK_NOT_MOUNTED;
+}
+
+// Invoked when usb bus is suspended
+// remote_wakeup_en : if host allow us  to perform remote wakeup
+// Within 7ms, device must draw an average of current less than 2.5 mA from bus
+void tud_suspend_cb(bool remote_wakeup_en)
+{
+  (void) remote_wakeup_en;
+  blink_interval_ms = BLINK_SUSPENDED;
+}
+
+// Invoked when usb bus is resumed
+void tud_resume_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+
+//--------------------------------------------------------------------+
+// USB CDC
+//--------------------------------------------------------------------+
+void cdc_task(void)
+{
+  if ( tud_cdc_connected() )
+  {
+    // connected and there are data available
+    if ( tud_cdc_available() )
+    {
+      uint8_t buf[64];
+
+      // read and echo back
+      uint32_t count = tud_cdc_read(buf, sizeof(buf));
+
+      for(uint32_t i=0; i<count; i++)
+      {
+        tud_cdc_write_char(buf[i]);
+
+        if ( buf[i] == '\r' ) tud_cdc_write_char('\n');
+      }
+
+      tud_cdc_write_flush();
+    }
+  }
+}
+
+// Invoked when cdc when line state changed e.g connected/disconnected
+void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts)
+{
+  (void) itf;
+
+  // connected
+  if ( dtr && rts )
+  {
+    // print initial message when connected
+    tud_cdc_write_str("\r\nTinyUSB CDC MSC device example\r\n");
+  }
+}
+
+// Invoked when CDC interface received data from host
+void tud_cdc_rx_cb(uint8_t itf)
+{
+  (void) itf;
+}
+
+//--------------------------------------------------------------------+
+// MIDI Task
+//--------------------------------------------------------------------+
+
+// Variable that holds the current position in the sequence.
+uint32_t note_pos = 0;
+
+// Store example melody as an array of note values
+static const uint8_t note_sequence[] =
+{
+  74,78,81,86,90,93,98,102,57,61,66,69,73,78,81,85,88,92,97,100,97,92,88,85,81,78,
+  74,69,66,62,57,62,66,69,74,78,81,86,90,93,97,102,97,93,90,85,81,78,73,68,64,61,
+  56,61,64,68,74,78,81,86,90,93,98,102
+};
+
+void midi_task(void)
+{
+  static uint32_t start_ms = 0;
+
+  uint8_t const cable_num = 0; // MIDI jack associated with USB endpoint
+  uint8_t const channel   = 0; // 0 for channel 1
+
+  // The MIDI interface always creates input and output port/jack descriptors
+  // regardless of these being used or not. Therefore incoming traffic should be read
+  // (possibly just discarded) to avoid the sender blocking in IO
+  uint8_t packet[4];
+  while( tud_midi_available() ) tud_midi_packet_read(packet);
+
+  // send note every 1000 ms
+  if (board_millis() - start_ms < 286) return; // not enough time
+  start_ms += 286;
+
+  // Previous positions in the note sequence.
+  int previous = (int) (note_pos - 1);
+
+  // If we currently are at position 0, set the
+  // previous position to the last note in the sequence.
+  if (previous < 0) previous = sizeof(note_sequence) - 1;
+
+  // Send Note On for current position at full velocity (127) on channel 1.
+  uint8_t note_on[3] = { 0x90 | channel, note_sequence[note_pos], 127 };
+  tud_midi_stream_write(cable_num, note_on, 3);
+
+  // Send Note Off for previous note.
+  uint8_t note_off[3] = { 0x80 | channel, note_sequence[previous], 0};
+  tud_midi_stream_write(cable_num, note_off, 3);
+
+  // Increment position
+  note_pos++;
+
+  // If we are at the end of the sequence, start over.
+  if (note_pos >= sizeof(note_sequence)) note_pos = 0;
+}
+
+//--------------------------------------------------------------------+
+// BLINKING TASK
+//--------------------------------------------------------------------+
+void led_blinking_task(void)
+{
+  static uint32_t start_ms = 0;
+  static bool led_state = false;
+
+  // Blink every interval ms
+  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
+  start_ms += blink_interval_ms;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}

Firmware/Core/tinyusb/examples/device/dynamic_configuration/src/msc_disk.c

@@ -0,0 +1,250 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+#if CFG_TUD_MSC
+
+// Some MCU doesn't have enough 8KB SRAM to store the whole disk
+// We will use Flash as read-only disk with board that has
+// CFG_EXAMPLE_MSC_READONLY defined
+
+#define README_CONTENTS \
+"This is tinyusb's MassStorage Class demo.\r\n\r\n\
+If you find any bugs or get any questions, feel free to file an\r\n\
+issue at github.com/hathach/tinyusb"
+
+enum
+{
+  DISK_BLOCK_NUM  = 16, // 8KB is the smallest size that windows allow to mount
+  DISK_BLOCK_SIZE = 512
+};
+
+#ifdef CFG_EXAMPLE_MSC_READONLY
+const
+#endif
+uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
+{
+  //------------- Block0: Boot Sector -------------//
+  // byte_per_sector    = DISK_BLOCK_SIZE; fat12_sector_num_16  = DISK_BLOCK_NUM;
+  // sector_per_cluster = 1; reserved_sectors = 1;
+  // fat_num            = 1; fat12_root_entry_num = 16;
+  // sector_per_fat     = 1; sector_per_track = 1; head_num = 1; hidden_sectors = 0;
+  // drive_number       = 0x80; media_type = 0xf8; extended_boot_signature = 0x29;
+  // filesystem_type    = "FAT12   "; volume_serial_number = 0x1234; volume_label = "TinyUSB MSC";
+  // FAT magic code at offset 510-511
+  {
+      0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00,
+      0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T' , 'i' , 'n' , 'y' , 'U' ,
+      'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00,
+
+      // Zero up to 2 last bytes of FAT magic code
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA
+  },
+
+  //------------- Block1: FAT12 Table -------------//
+  {
+      0xF8, 0xFF, 0xFF, 0xFF, 0x0F // // first 2 entries must be F8FF, third entry is cluster end of readme file
+  },
+
+  //------------- Block2: Root Directory -------------//
+  {
+      // first entry is volume label
+      'T' , 'i' , 'n' , 'y' , 'U' , 'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x08, 0x00, 0x00, 0x00, 0x00,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      // second entry is readme file
+      'R' , 'E' , 'A' , 'D' , 'M' , 'E' , ' ' , ' ' , 'T' , 'X' , 'T' , 0x20, 0x00, 0xC6, 0x52, 0x6D,
+      0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00,
+      sizeof(README_CONTENTS)-1, 0x00, 0x00, 0x00 // readme's files size (4 Bytes)
+  },
+
+  //------------- Block3: Readme Content -------------//
+  README_CONTENTS
+};
+
+// Invoked when received SCSI_CMD_INQUIRY
+// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively
+void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4])
+{
+  (void) lun;
+
+  const char vid[] = "TinyUSB";
+  const char pid[] = "Mass Storage";
+  const char rev[] = "1.0";
+
+  memcpy(vendor_id  , vid, strlen(vid));
+  memcpy(product_id , pid, strlen(pid));
+  memcpy(product_rev, rev, strlen(rev));
+}
+
+// Invoked when received Test Unit Ready command.
+// return true allowing host to read/write this LUN e.g SD card inserted
+bool tud_msc_test_unit_ready_cb(uint8_t lun)
+{
+  (void) lun;
+
+  return true; // RAM disk is always ready
+}
+
+// Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size
+// Application update block count and block size
+void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size)
+{
+  (void) lun;
+
+  *block_count = DISK_BLOCK_NUM;
+  *block_size  = DISK_BLOCK_SIZE;
+}
+
+// Invoked when received Start Stop Unit command
+// - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage
+// - Start = 1 : active mode, if load_eject = 1 : load disk storage
+bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject)
+{
+  (void) lun;
+  (void) power_condition;
+
+  if ( load_eject )
+  {
+    if (start)
+    {
+      // load disk storage
+    }else
+    {
+      // unload disk storage
+    }
+  }
+
+  return true;
+}
+
+// Callback invoked when received READ10 command.
+// Copy disk's data to buffer (up to bufsize) and return number of copied bytes.
+int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize)
+{
+  (void) lun;
+
+  // out of ramdisk
+  if ( lba >= DISK_BLOCK_NUM ) return -1;
+
+  uint8_t const* addr = msc_disk[lba] + offset;
+  memcpy(buffer, addr, bufsize);
+
+  return (int32_t) bufsize;
+}
+
+// Callback invoked when received WRITE10 command.
+// Process data in buffer to disk's storage and return number of written bytes
+int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize)
+{
+  (void) lun;
+
+  // out of ramdisk
+  if ( lba >= DISK_BLOCK_NUM ) return -1;
+
+#ifndef CFG_EXAMPLE_MSC_READONLY
+  uint8_t* addr = msc_disk[lba] + offset;
+  memcpy(addr, buffer, bufsize);
+#else
+  (void) lba; (void) offset; (void) buffer;
+#endif
+
+  return (int32_t) bufsize;
+}
+
+// Callback invoked when received an SCSI command not in built-in list below
+// - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE
+// - READ10 and WRITE10 has their own callbacks
+int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize)
+{
+  // read10 & write10 has their own callback and MUST not be handled here
+
+  void const* response = NULL;
+  int32_t resplen = 0;
+
+  // most scsi handled is input
+  bool in_xfer = true;
+
+  switch (scsi_cmd[0])
+  {
+    default:
+      // Set Sense = Invalid Command Operation
+      tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
+
+      // negative means error -> tinyusb could stall and/or response with failed status
+      resplen = -1;
+    break;
+  }
+
+  // return resplen must not larger than bufsize
+  if ( resplen > bufsize ) resplen = bufsize;
+
+  if ( response && (resplen > 0) )
+  {
+    if(in_xfer)
+    {
+      memcpy(buffer, response, (size_t) resplen);
+    }else
+    {
+      // SCSI output
+    }
+  }
+
+  return resplen;
+}
+
+#endif

Firmware/Core/tinyusb/examples/device/dynamic_configuration/src/tusb_config.h

@@ -0,0 +1,115 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS           OPT_OS_NONE
+#endif
+
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE    64
+#endif
+
+//------------- CLASS -------------//
+#define CFG_TUD_CDC               1
+#define CFG_TUD_MSC               1
+#define CFG_TUD_MIDI              1
+#define CFG_TUD_HID               0
+#define CFG_TUD_VENDOR            0
+
+// CDC FIFO size of TX and RX
+#define CFG_TUD_CDC_RX_BUFSIZE    (TUD_OPT_HIGH_SPEED ? 512 : 64)
+#define CFG_TUD_CDC_TX_BUFSIZE    (TUD_OPT_HIGH_SPEED ? 512 : 64)
+
+// MIDI FIFO size of TX and RX
+#define CFG_TUD_MIDI_RX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
+#define CFG_TUD_MIDI_TX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
+
+// MSC Buffer size of Device Mass storage
+#define CFG_TUD_MSC_EP_BUFSIZE    512
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */

Firmware/Core/tinyusb/examples/device/dynamic_configuration/src/usb_descriptors.c

@@ -0,0 +1,256 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "tusb.h"
+#include "bsp/board.h"
+
+/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
+ * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
+ *
+ * Auto ProductID layout's Bitmap:
+ *   [MSB]         HID | MSC | CDC          [LSB]
+ */
+#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
+#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
+                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
+
+// Configuration mode
+// 0 : enumerated as CDC/MIDI. Board button is not pressed when enumerating
+// 1 : enumerated as MSC. Board button is pressed when enumerating
+static uint32_t mode = 0;
+
+//--------------------------------------------------------------------+
+// Device Descriptors
+//--------------------------------------------------------------------+
+tusb_desc_device_t const desc_device_0 =
+{
+    .bLength            = sizeof(tusb_desc_device_t),
+    .bDescriptorType    = TUSB_DESC_DEVICE,
+    .bcdUSB             = 0x0200,
+
+    // Use Interface Association Descriptor (IAD) for CDC
+    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
+    .bDeviceClass       = TUSB_CLASS_MISC,
+    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
+    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
+
+    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+    .idVendor           = 0xCafe,
+    .idProduct          = USB_PID,
+    .bcdDevice          = 0x0100,
+
+    .iManufacturer      = 0x01,
+    .iProduct           = 0x02,
+    .iSerialNumber      = 0x03,
+
+    .bNumConfigurations = 0x01
+};
+
+tusb_desc_device_t const desc_device_1 =
+{
+    .bLength            = sizeof(tusb_desc_device_t),
+    .bDescriptorType    = TUSB_DESC_DEVICE,
+    .bcdUSB             = 0x0200,
+    .bDeviceClass       = 0,
+    .bDeviceSubClass    = 0,
+    .bDeviceProtocol    = 0,
+
+    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+    .idVendor           = 0xCafe,
+    .idProduct          = USB_PID + 11, // should be different PID than desc0
+    .bcdDevice          = 0x0100,
+
+    .iManufacturer      = 0x01,
+    .iProduct           = 0x02,
+    .iSerialNumber      = 0x03,
+
+    .bNumConfigurations = 0x01
+};
+
+// Invoked when received GET DEVICE DESCRIPTOR
+// Application return pointer to descriptor
+uint8_t const * tud_descriptor_device_cb(void)
+{
+  mode = board_button_read();
+  return (uint8_t const*) (mode ? &desc_device_1 : &desc_device_0);
+}
+
+//--------------------------------------------------------------------+
+// Configuration Descriptor
+//--------------------------------------------------------------------+
+
+enum
+{
+  ITF_0_NUM_CDC = 0,
+  ITF_0_NUM_CDC_DATA,
+  ITF_0_NUM_MIDI,
+  ITF_0_NUM_MIDI_STREAMING,
+  ITF_0_NUM_TOTAL
+};
+
+enum
+{
+  ITF_1_NUM_MSC = 0,
+  ITF_1_NUM_TOTAL
+};
+
+#define CONFIG_0_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MIDI_DESC_LEN)
+#define CONFIG_1_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_MSC_DESC_LEN)
+
+#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
+  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
+  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ...
+  #define EPNUM_0_CDC_NOTIF   0x81
+  #define EPNUM_0_CDC_OUT     0x02
+  #define EPNUM_0_CDC_IN      0x82
+
+  #define EPNUM_0_MIDI_OUT    0x05
+  #define EPNUM_0_MIDI_IN     0x85
+
+  #define EPNUM_1_MSC_OUT     0x02
+  #define EPNUM_1_MSC_IN      0x82
+
+#elif CFG_TUSB_MCU == OPT_MCU_SAMG
+  // SAMG doesn't support a same endpoint number with different direction IN and OUT
+  //    e.g EP1 OUT & EP1 IN cannot exist together
+  #define EPNUM_0_CDC_NOTIF   0x81
+  #define EPNUM_0_CDC_OUT     0x02
+  #define EPNUM_0_CDC_IN      0x83
+
+  #define EPNUM_0_MIDI_OUT    0x04
+  #define EPNUM_0_MIDI_IN     0x85
+
+  #define EPNUM_1_MSC_OUT     0x01
+  #define EPNUM_1_MSC_IN      0x82
+
+#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X
+  // FT9XX doesn't support a same endpoint number with different direction IN and OUT
+  //    e.g EP1 OUT & EP1 IN cannot exist together
+  #define EPNUM_0_CDC_NOTIF   0x81
+  #define EPNUM_0_CDC_OUT     0x02
+  #define EPNUM_0_CDC_IN      0x83
+
+  #define EPNUM_0_MIDI_OUT    0x04
+  #define EPNUM_0_MIDI_IN     0x85
+
+  #define EPNUM_1_MSC_OUT     0x01
+  #define EPNUM_1_MSC_IN      0x82
+
+#else
+  #define EPNUM_0_CDC_NOTIF   0x81
+  #define EPNUM_0_CDC_OUT     0x02
+  #define EPNUM_0_CDC_IN      0x82
+
+  #define EPNUM_0_MIDI_OUT    0x03
+  #define EPNUM_0_MIDI_IN     0x83
+
+  #define EPNUM_1_MSC_OUT     0x01
+  #define EPNUM_1_MSC_IN      0x81
+#endif
+
+uint8_t const desc_configuration_0[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_0_NUM_TOTAL, 0, CONFIG_0_TOTAL_LEN, 0x00, 100),
+
+  // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
+  TUD_CDC_DESCRIPTOR(ITF_0_NUM_CDC, 0, EPNUM_0_CDC_NOTIF, 8, EPNUM_0_CDC_OUT, EPNUM_0_CDC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64),
+
+  // Interface number, string index, EP Out & EP In address, EP size
+  TUD_MIDI_DESCRIPTOR(ITF_0_NUM_MIDI, 0, EPNUM_0_MIDI_OUT, EPNUM_0_MIDI_IN, TUD_OPT_HIGH_SPEED ? 512 : 64),
+};
+
+
+uint8_t const desc_configuraiton_1[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_1_NUM_TOTAL, 0, CONFIG_1_TOTAL_LEN, 0x00, 100),
+
+  // Interface number, string index, EP Out & EP In address, EP size
+  TUD_MSC_DESCRIPTOR(ITF_1_NUM_MSC, 0, EPNUM_1_MSC_OUT, EPNUM_1_MSC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64),
+};
+
+
+// Invoked when received GET CONFIGURATION DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+  return mode ? desc_configuraiton_1 : desc_configuration_0;
+}
+
+//--------------------------------------------------------------------+
+// String Descriptors
+//--------------------------------------------------------------------+
+
+// array of pointer to string descriptors
+char const* string_desc_arr [] =
+{
+  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
+  "TinyUSB",                     // 1: Manufacturer
+  "TinyUSB Device",              // 2: Product
+  "123456",                      // 3: Serials, should use chip ID
+};
+
+static uint16_t _desc_str[32];
+
+// Invoked when received GET STRING DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
+{
+  (void) langid;
+
+  uint8_t chr_count;
+
+  if ( index == 0)
+  {
+    memcpy(&_desc_str[1], string_desc_arr[0], 2);
+    chr_count = 1;
+  }else
+  {
+    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
+    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
+
+    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
+
+    const char* str = string_desc_arr[index];
+
+    // Cap at max char
+    chr_count = (uint8_t) strlen(str);
+    if ( chr_count > 31 ) chr_count = 31;
+
+    // Convert ASCII string into UTF-16
+    for(uint8_t i=0; i<chr_count; i++)
+    {
+      _desc_str[1+i] = str[i];
+    }
+  }
+
+  // first byte is length (including header), second byte is string type
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
+
+  return _desc_str;
+}

Firmware/Core/tinyusb/examples/device/hid_boot_interface/CMakeLists.txt

@@ -0,0 +1,28 @@
+cmake_minimum_required(VERSION 3.5)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT})
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
+        )
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src
+        )
+
+# Configure compilation flags and libraries for the example... see the corresponding function
+# in hw/bsp/FAMILY/family.cmake for details.
+family_configure_device_example(${PROJECT})

Firmware/Core/tinyusb/examples/device/hid_boot_interface/Makefile

@@ -0,0 +1,15 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+INC += \
+	src \
+	$(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE = \
+	src/main.c \
+	src/usb_descriptors.c
+	
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+include ../../rules.mk

Firmware/Core/tinyusb/examples/device/hid_boot_interface/src/main.c

@@ -0,0 +1,257 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+#include "usb_descriptors.h"
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+
+/* Blink pattern
+ * - 250 ms  : device not mounted
+ * - 1000 ms : device mounted
+ * - 2500 ms : device is suspended
+ */
+enum  {
+  BLINK_NOT_MOUNTED = 250,
+  BLINK_MOUNTED = 1000,
+  BLINK_SUSPENDED = 2500,
+};
+
+static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
+
+void led_blinking_task(void);
+void hid_task(void);
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+  board_init();
+
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
+
+  while (1)
+  {
+    tud_task(); // tinyusb device task
+    led_blinking_task();
+
+    hid_task();
+  }
+
+  return 0;
+}
+
+//--------------------------------------------------------------------+
+// Device callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when device is mounted
+void tud_mount_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+// Invoked when device is unmounted
+void tud_umount_cb(void)
+{
+  blink_interval_ms = BLINK_NOT_MOUNTED;
+}
+
+// Invoked when usb bus is suspended
+// remote_wakeup_en : if host allow us  to perform remote wakeup
+// Within 7ms, device must draw an average of current less than 2.5 mA from bus
+void tud_suspend_cb(bool remote_wakeup_en)
+{
+  (void) remote_wakeup_en;
+  blink_interval_ms = BLINK_SUSPENDED;
+}
+
+// Invoked when usb bus is resumed
+void tud_resume_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+//--------------------------------------------------------------------+
+// USB HID
+//--------------------------------------------------------------------+
+
+// Every 10ms, we will sent 1 report for each HID profile (keyboard, mouse etc ..)
+// tud_hid_report_complete_cb() is used to send the next report after previous one is complete
+void hid_task(void)
+{
+  // Poll every 10ms
+  const uint32_t interval_ms = 10;
+  static uint32_t start_ms = 0;
+
+  if ( board_millis() - start_ms < interval_ms) return; // not enough time
+  start_ms += interval_ms;
+
+  uint32_t const btn = board_button_read();
+
+  if ( tud_suspended() && btn )
+  {
+    // Wake up host if we are in suspend mode
+    // and REMOTE_WAKEUP feature is enabled by host
+    tud_remote_wakeup();
+  }
+  else
+  {
+    // keyboard interface
+    if ( tud_hid_n_ready(ITF_NUM_KEYBOARD) )
+    {
+      // used to avoid send multiple consecutive zero report for keyboard
+      static bool has_keyboard_key = false;
+
+      uint8_t const report_id = 0;
+      uint8_t const modifier  = 0;
+
+      if ( btn )
+      {
+        uint8_t keycode[6] = { 0 };
+        keycode[0] = HID_KEY_ARROW_RIGHT;
+
+        tud_hid_n_keyboard_report(ITF_NUM_KEYBOARD, report_id, modifier, keycode);
+        has_keyboard_key = true;
+      }else
+      {
+        // send empty key report if previously has key pressed
+        if (has_keyboard_key) tud_hid_n_keyboard_report(ITF_NUM_KEYBOARD, report_id, modifier, NULL);
+        has_keyboard_key = false;
+      }
+    }
+
+    // mouse interface
+    if ( tud_hid_n_ready(ITF_NUM_MOUSE) )
+    {
+      if ( btn )
+      {
+        uint8_t const report_id   = 0;
+        uint8_t const button_mask = 0;
+        uint8_t const vertical    = 0;
+        uint8_t const horizontal  = 0;
+        int8_t  const delta       = 5;
+
+        tud_hid_n_mouse_report(ITF_NUM_MOUSE, report_id, button_mask, delta, delta, vertical, horizontal);
+      }
+    }
+  }
+}
+
+// Invoked when received SET_PROTOCOL request
+// protocol is either HID_PROTOCOL_BOOT (0) or HID_PROTOCOL_REPORT (1)
+void tud_hid_set_protocol_cb(uint8_t instance, uint8_t protocol)
+{
+  (void) instance;
+  (void) protocol;
+
+  // nothing to do since we use the same compatible boot report for both Boot and Report mode.
+  // TODO set a indicator for user
+}
+
+// Invoked when sent REPORT successfully to host
+// Application can use this to send the next report
+// Note: For composite reports, report[0] is report ID
+void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len)
+{
+  (void) instance;
+  (void) report;
+  (void) len;
+
+  // nothing to do
+}
+
+// Invoked when received GET_REPORT control request
+// Application must fill buffer report's content and return its length.
+// Return zero will cause the stack to STALL request
+uint16_t tud_hid_get_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen)
+{
+  // TODO not Implemented
+  (void) instance;
+  (void) report_id;
+  (void) report_type;
+  (void) buffer;
+  (void) reqlen;
+
+  return 0;
+}
+
+// Invoked when received SET_REPORT control request or
+// received data on OUT endpoint ( Report ID = 0, Type = 0 )
+void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize)
+{
+  (void) report_id;
+
+  // keyboard interface
+  if (instance == ITF_NUM_KEYBOARD)
+  {
+    // Set keyboard LED e.g Capslock, Numlock etc...
+    if (report_type == HID_REPORT_TYPE_OUTPUT)
+    {
+      // bufsize should be (at least) 1
+      if ( bufsize < 1 ) return;
+
+      uint8_t const kbd_leds = buffer[0];
+
+      if (kbd_leds & KEYBOARD_LED_CAPSLOCK)
+      {
+        // Capslock On: disable blink, turn led on
+        blink_interval_ms = 0;
+        board_led_write(true);
+      }else
+      {
+        // Caplocks Off: back to normal blink
+        board_led_write(false);
+        blink_interval_ms = BLINK_MOUNTED;
+      }
+    }
+  }
+}
+
+//--------------------------------------------------------------------+
+// BLINKING TASK
+//--------------------------------------------------------------------+
+void led_blinking_task(void)
+{
+  static uint32_t start_ms = 0;
+  static bool led_state = false;
+
+  // blink is disabled
+  if (!blink_interval_ms) return;
+
+  // Blink every interval ms
+  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
+  start_ms += blink_interval_ms;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}

Firmware/Core/tinyusb/examples/device/hid_boot_interface/src/tusb_config.h

@@ -0,0 +1,107 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS           OPT_OS_NONE
+#endif
+
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE    64
+#endif
+
+//------------- CLASS -------------//
+#define CFG_TUD_HID               2 // 1 for boot keyboard, 1 for boot mouse
+#define CFG_TUD_CDC               0
+#define CFG_TUD_MSC               0
+#define CFG_TUD_MIDI              0
+#define CFG_TUD_VENDOR            0
+
+// HID buffer size Should be sufficient to hold ID (if any) + Data
+#define CFG_TUD_HID_EP_BUFSIZE    8
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */

Firmware/Core/tinyusb/examples/device/hid_boot_interface/src/usb_descriptors.c

@@ -0,0 +1,180 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "tusb.h"
+#include "usb_descriptors.h"
+
+/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
+ * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
+ *
+ * Auto ProductID layout's Bitmap:
+ *   [MSB]         HID | MSC | CDC          [LSB]
+ */
+#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
+#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
+                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
+
+//--------------------------------------------------------------------+
+// Device Descriptors
+//--------------------------------------------------------------------+
+tusb_desc_device_t const desc_device =
+{
+    .bLength            = sizeof(tusb_desc_device_t),
+    .bDescriptorType    = TUSB_DESC_DEVICE,
+    .bcdUSB             = 0x0200,
+    .bDeviceClass       = 0x00,
+    .bDeviceSubClass    = 0x00,
+    .bDeviceProtocol    = 0x00,
+    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+
+    .idVendor           = 0xCafe,
+    .idProduct          = USB_PID,
+    .bcdDevice          = 0x0100,
+
+    .iManufacturer      = 0x01,
+    .iProduct           = 0x02,
+    .iSerialNumber      = 0x03,
+
+    .bNumConfigurations = 0x01
+};
+
+// Invoked when received GET DEVICE DESCRIPTOR
+// Application return pointer to descriptor
+uint8_t const * tud_descriptor_device_cb(void)
+{
+  return (uint8_t const *) &desc_device;
+}
+
+//--------------------------------------------------------------------+
+// HID Report Descriptor
+//--------------------------------------------------------------------+
+
+uint8_t const desc_hid_keyboard_report[] =
+{
+  TUD_HID_REPORT_DESC_KEYBOARD()
+};
+
+uint8_t const desc_hid_mouse_report[] =
+{
+  TUD_HID_REPORT_DESC_MOUSE()
+};
+
+// Invoked when received GET HID REPORT DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_hid_descriptor_report_cb(uint8_t instance)
+{
+  return (instance == 0) ? desc_hid_keyboard_report : desc_hid_mouse_report;
+}
+
+//--------------------------------------------------------------------+
+// Configuration Descriptor
+//--------------------------------------------------------------------+
+
+#define CONFIG_TOTAL_LEN  (TUD_CONFIG_DESC_LEN + 2*TUD_HID_DESC_LEN)
+
+#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
+  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
+  // 1 Interrupt, 2 Bulk, 3 Iso, 4 Interrupt, 5 Bulk etc ...
+  #define EPNUM_KEYBOARD   0x81
+  #define EPNUM_MOUSE      0x84
+#else
+  #define EPNUM_KEYBOARD   0x81
+  #define EPNUM_MOUSE      0x82
+#endif
+
+uint8_t const desc_configuration[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
+
+  // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval
+  TUD_HID_DESCRIPTOR(ITF_NUM_KEYBOARD, 0, HID_ITF_PROTOCOL_KEYBOARD, sizeof(desc_hid_keyboard_report), EPNUM_KEYBOARD, CFG_TUD_HID_EP_BUFSIZE, 10),
+
+  // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval
+  TUD_HID_DESCRIPTOR(ITF_NUM_MOUSE, 0, HID_ITF_PROTOCOL_MOUSE, sizeof(desc_hid_mouse_report), EPNUM_MOUSE, CFG_TUD_HID_EP_BUFSIZE, 10)
+};
+
+// Invoked when received GET CONFIGURATION DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+  return desc_configuration;
+}
+
+//--------------------------------------------------------------------+
+// String Descriptors
+//--------------------------------------------------------------------+
+
+// array of pointer to string descriptors
+char const* string_desc_arr [] =
+{
+  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
+  "TinyUSB",                     // 1: Manufacturer
+  "TinyUSB Device",              // 2: Product
+  "123456",                      // 3: Serials, should use chip ID
+};
+
+static uint16_t _desc_str[32];
+
+// Invoked when received GET STRING DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
+{
+  (void) langid;
+
+  uint8_t chr_count;
+
+  if ( index == 0)
+  {
+    memcpy(&_desc_str[1], string_desc_arr[0], 2);
+    chr_count = 1;
+  }else
+  {
+    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
+    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
+
+    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
+
+    const char* str = string_desc_arr[index];
+
+    // Cap at max char
+    chr_count = (uint8_t) strlen(str);
+    if ( chr_count > 31 ) chr_count = 31;
+
+    // Convert ASCII string into UTF-16
+    for(uint8_t i=0; i<chr_count; i++)
+    {
+      _desc_str[1+i] = str[i];
+    }
+  }
+
+  // first byte is length (including header), second byte is string type
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
+
+  return _desc_str;
+}

Firmware/Core/tinyusb/examples/device/hid_boot_interface/src/usb_descriptors.h

@@ -0,0 +1,35 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef USB_DESCRIPTORS_H_
+#define USB_DESCRIPTORS_H_
+
+enum
+{
+  ITF_NUM_KEYBOARD,
+  ITF_NUM_MOUSE,
+  ITF_NUM_TOTAL
+};
+
+#endif

Firmware/Core/tinyusb/examples/device/hid_composite/CMakeLists.txt

@@ -0,0 +1,28 @@
+cmake_minimum_required(VERSION 3.5)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT})
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
+        )
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src
+        )
+
+# Configure compilation flags and libraries for the example... see the corresponding function
+# in hw/bsp/FAMILY/family.cmake for details.
+family_configure_device_example(${PROJECT})

Firmware/Core/tinyusb/examples/device/hid_composite/Makefile

@@ -0,0 +1,12 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+INC += \
+	src \
+	$(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE += $(wildcard src/*.c)
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+include ../../rules.mk

Firmware/Core/tinyusb/examples/device/hid_composite/src/main.c

@@ -0,0 +1,304 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+#include "usb_descriptors.h"
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+
+/* Blink pattern
+ * - 250 ms  : device not mounted
+ * - 1000 ms : device mounted
+ * - 2500 ms : device is suspended
+ */
+enum  {
+  BLINK_NOT_MOUNTED = 250,
+  BLINK_MOUNTED = 1000,
+  BLINK_SUSPENDED = 2500,
+};
+
+static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
+
+void led_blinking_task(void);
+void hid_task(void);
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+  board_init();
+
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
+
+  while (1)
+  {
+    tud_task(); // tinyusb device task
+    led_blinking_task();
+
+    hid_task();
+  }
+
+  return 0;
+}
+
+//--------------------------------------------------------------------+
+// Device callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when device is mounted
+void tud_mount_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+// Invoked when device is unmounted
+void tud_umount_cb(void)
+{
+  blink_interval_ms = BLINK_NOT_MOUNTED;
+}
+
+// Invoked when usb bus is suspended
+// remote_wakeup_en : if host allow us  to perform remote wakeup
+// Within 7ms, device must draw an average of current less than 2.5 mA from bus
+void tud_suspend_cb(bool remote_wakeup_en)
+{
+  (void) remote_wakeup_en;
+  blink_interval_ms = BLINK_SUSPENDED;
+}
+
+// Invoked when usb bus is resumed
+void tud_resume_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+//--------------------------------------------------------------------+
+// USB HID
+//--------------------------------------------------------------------+
+
+static void send_hid_report(uint8_t report_id, uint32_t btn)
+{
+  // skip if hid is not ready yet
+  if ( !tud_hid_ready() ) return;
+
+  switch(report_id)
+  {
+    case REPORT_ID_KEYBOARD:
+    {
+      // use to avoid send multiple consecutive zero report for keyboard
+      static bool has_keyboard_key = false;
+
+      if ( btn )
+      {
+        uint8_t keycode[6] = { 0 };
+        keycode[0] = HID_KEY_A;
+
+        tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, keycode);
+        has_keyboard_key = true;
+      }else
+      {
+        // send empty key report if previously has key pressed
+        if (has_keyboard_key) tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, NULL);
+        has_keyboard_key = false;
+      }
+    }
+    break;
+
+    case REPORT_ID_MOUSE:
+    {
+      int8_t const delta = 5;
+
+      // no button, right + down, no scroll, no pan
+      tud_hid_mouse_report(REPORT_ID_MOUSE, 0x00, delta, delta, 0, 0);
+    }
+    break;
+
+    case REPORT_ID_CONSUMER_CONTROL:
+    {
+      // use to avoid send multiple consecutive zero report
+      static bool has_consumer_key = false;
+
+      if ( btn )
+      {
+        // volume down
+        uint16_t volume_down = HID_USAGE_CONSUMER_VOLUME_DECREMENT;
+        tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &volume_down, 2);
+        has_consumer_key = true;
+      }else
+      {
+        // send empty key report (release key) if previously has key pressed
+        uint16_t empty_key = 0;
+        if (has_consumer_key) tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &empty_key, 2);
+        has_consumer_key = false;
+      }
+    }
+    break;
+
+    case REPORT_ID_GAMEPAD:
+    {
+      // use to avoid send multiple consecutive zero report for keyboard
+      static bool has_gamepad_key = false;
+
+      hid_gamepad_report_t report =
+      {
+        .x   = 0, .y = 0, .z = 0, .rz = 0, .rx = 0, .ry = 0,
+        .hat = 0, .buttons = 0
+      };
+
+      if ( btn )
+      {
+        report.hat = GAMEPAD_HAT_UP;
+        report.buttons = GAMEPAD_BUTTON_A;
+        tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report));
+
+        has_gamepad_key = true;
+      }else
+      {
+        report.hat = GAMEPAD_HAT_CENTERED;
+        report.buttons = 0;
+        if (has_gamepad_key) tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report));
+        has_gamepad_key = false;
+      }
+    }
+    break;
+
+    default: break;
+  }
+}
+
+// Every 10ms, we will sent 1 report for each HID profile (keyboard, mouse etc ..)
+// tud_hid_report_complete_cb() is used to send the next report after previous one is complete
+void hid_task(void)
+{
+  // Poll every 10ms
+  const uint32_t interval_ms = 10;
+  static uint32_t start_ms = 0;
+
+  if ( board_millis() - start_ms < interval_ms) return; // not enough time
+  start_ms += interval_ms;
+
+  uint32_t const btn = board_button_read();
+
+  // Remote wakeup
+  if ( tud_suspended() && btn )
+  {
+    // Wake up host if we are in suspend mode
+    // and REMOTE_WAKEUP feature is enabled by host
+    tud_remote_wakeup();
+  }else
+  {
+    // Send the 1st of report chain, the rest will be sent by tud_hid_report_complete_cb()
+    send_hid_report(REPORT_ID_KEYBOARD, btn);
+  }
+}
+
+// Invoked when sent REPORT successfully to host
+// Application can use this to send the next report
+// Note: For composite reports, report[0] is report ID
+void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len)
+{
+  (void) instance;
+  (void) len;
+
+  uint8_t next_report_id = report[0] + 1u;
+
+  if (next_report_id < REPORT_ID_COUNT)
+  {
+    send_hid_report(next_report_id, board_button_read());
+  }
+}
+
+// Invoked when received GET_REPORT control request
+// Application must fill buffer report's content and return its length.
+// Return zero will cause the stack to STALL request
+uint16_t tud_hid_get_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen)
+{
+  // TODO not Implemented
+  (void) instance;
+  (void) report_id;
+  (void) report_type;
+  (void) buffer;
+  (void) reqlen;
+
+  return 0;
+}
+
+// Invoked when received SET_REPORT control request or
+// received data on OUT endpoint ( Report ID = 0, Type = 0 )
+void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize)
+{
+  (void) instance;
+
+  if (report_type == HID_REPORT_TYPE_OUTPUT)
+  {
+    // Set keyboard LED e.g Capslock, Numlock etc...
+    if (report_id == REPORT_ID_KEYBOARD)
+    {
+      // bufsize should be (at least) 1
+      if ( bufsize < 1 ) return;
+
+      uint8_t const kbd_leds = buffer[0];
+
+      if (kbd_leds & KEYBOARD_LED_CAPSLOCK)
+      {
+        // Capslock On: disable blink, turn led on
+        blink_interval_ms = 0;
+        board_led_write(true);
+      }else
+      {
+        // Caplocks Off: back to normal blink
+        board_led_write(false);
+        blink_interval_ms = BLINK_MOUNTED;
+      }
+    }
+  }
+}
+
+//--------------------------------------------------------------------+
+// BLINKING TASK
+//--------------------------------------------------------------------+
+void led_blinking_task(void)
+{
+  static uint32_t start_ms = 0;
+  static bool led_state = false;
+
+  // blink is disabled
+  if (!blink_interval_ms) return;
+
+  // Blink every interval ms
+  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
+  start_ms += blink_interval_ms;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}

Firmware/Core/tinyusb/examples/device/hid_composite/src/tusb_config.h

@@ -0,0 +1,107 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS           OPT_OS_NONE
+#endif
+
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE    64
+#endif
+
+//------------- CLASS -------------//
+#define CFG_TUD_HID               1
+#define CFG_TUD_CDC               0
+#define CFG_TUD_MSC               0
+#define CFG_TUD_MIDI              0
+#define CFG_TUD_VENDOR            0
+
+// HID buffer size Should be sufficient to hold ID (if any) + Data
+#define CFG_TUD_HID_EP_BUFSIZE    16
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */

Firmware/Core/tinyusb/examples/device/hid_composite/src/usb_descriptors.c

@@ -0,0 +1,227 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "tusb.h"
+#include "usb_descriptors.h"
+
+/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
+ * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
+ *
+ * Auto ProductID layout's Bitmap:
+ *   [MSB]         HID | MSC | CDC          [LSB]
+ */
+#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
+#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
+                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
+
+#define USB_VID   0xCafe
+#define USB_BCD   0x0200
+
+//--------------------------------------------------------------------+
+// Device Descriptors
+//--------------------------------------------------------------------+
+tusb_desc_device_t const desc_device =
+{
+    .bLength            = sizeof(tusb_desc_device_t),
+    .bDescriptorType    = TUSB_DESC_DEVICE,
+    .bcdUSB             = USB_BCD,
+    .bDeviceClass       = 0x00,
+    .bDeviceSubClass    = 0x00,
+    .bDeviceProtocol    = 0x00,
+    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+
+    .idVendor           = USB_VID,
+    .idProduct          = USB_PID,
+    .bcdDevice          = 0x0100,
+
+    .iManufacturer      = 0x01,
+    .iProduct           = 0x02,
+    .iSerialNumber      = 0x03,
+
+    .bNumConfigurations = 0x01
+};
+
+// Invoked when received GET DEVICE DESCRIPTOR
+// Application return pointer to descriptor
+uint8_t const * tud_descriptor_device_cb(void)
+{
+  return (uint8_t const *) &desc_device;
+}
+
+//--------------------------------------------------------------------+
+// HID Report Descriptor
+//--------------------------------------------------------------------+
+
+uint8_t const desc_hid_report[] =
+{
+  TUD_HID_REPORT_DESC_KEYBOARD( HID_REPORT_ID(REPORT_ID_KEYBOARD         )),
+  TUD_HID_REPORT_DESC_MOUSE   ( HID_REPORT_ID(REPORT_ID_MOUSE            )),
+  TUD_HID_REPORT_DESC_CONSUMER( HID_REPORT_ID(REPORT_ID_CONSUMER_CONTROL )),
+  TUD_HID_REPORT_DESC_GAMEPAD ( HID_REPORT_ID(REPORT_ID_GAMEPAD          ))
+};
+
+// Invoked when received GET HID REPORT DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_hid_descriptor_report_cb(uint8_t instance)
+{
+  (void) instance;
+  return desc_hid_report;
+}
+
+//--------------------------------------------------------------------+
+// Configuration Descriptor
+//--------------------------------------------------------------------+
+
+enum
+{
+  ITF_NUM_HID,
+  ITF_NUM_TOTAL
+};
+
+#define  CONFIG_TOTAL_LEN  (TUD_CONFIG_DESC_LEN + TUD_HID_DESC_LEN)
+
+#define EPNUM_HID   0x81
+
+uint8_t const desc_configuration[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
+
+  // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval
+  TUD_HID_DESCRIPTOR(ITF_NUM_HID, 0, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_HID, CFG_TUD_HID_EP_BUFSIZE, 5)
+};
+
+#if TUD_OPT_HIGH_SPEED
+// Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration
+
+// other speed configuration
+uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN];
+
+// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed
+tusb_desc_device_qualifier_t const desc_device_qualifier =
+{
+  .bLength            = sizeof(tusb_desc_device_qualifier_t),
+  .bDescriptorType    = TUSB_DESC_DEVICE_QUALIFIER,
+  .bcdUSB             = USB_BCD,
+
+  .bDeviceClass       = 0x00,
+  .bDeviceSubClass    = 0x00,
+  .bDeviceProtocol    = 0x00,
+
+  .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+  .bNumConfigurations = 0x01,
+  .bReserved          = 0x00
+};
+
+// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete.
+// device_qualifier descriptor describes information about a high-speed capable device that would
+// change if the device were operating at the other speed. If not highspeed capable stall this request.
+uint8_t const* tud_descriptor_device_qualifier_cb(void)
+{
+  return (uint8_t const*) &desc_device_qualifier;
+}
+
+// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa
+uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+
+  // other speed config is basically configuration with type = OHER_SPEED_CONFIG
+  memcpy(desc_other_speed_config, desc_configuration, CONFIG_TOTAL_LEN);
+  desc_other_speed_config[1] = TUSB_DESC_OTHER_SPEED_CONFIG;
+
+  // this example use the same configuration for both high and full speed mode
+  return desc_other_speed_config;
+}
+
+#endif // highspeed
+
+// Invoked when received GET CONFIGURATION DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+
+  // This example use the same configuration for both high and full speed mode
+  return desc_configuration;
+}
+
+//--------------------------------------------------------------------+
+// String Descriptors
+//--------------------------------------------------------------------+
+
+// array of pointer to string descriptors
+char const* string_desc_arr [] =
+{
+  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
+  "TinyUSB",                     // 1: Manufacturer
+  "TinyUSB Device",              // 2: Product
+  "123456",                      // 3: Serials, should use chip ID
+};
+
+static uint16_t _desc_str[32];
+
+// Invoked when received GET STRING DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
+{
+  (void) langid;
+
+  uint8_t chr_count;
+
+  if ( index == 0)
+  {
+    memcpy(&_desc_str[1], string_desc_arr[0], 2);
+    chr_count = 1;
+  }else
+  {
+    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
+    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
+
+    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
+
+    const char* str = string_desc_arr[index];
+
+    // Cap at max char
+    chr_count = (uint8_t) strlen(str);
+    if ( chr_count > 31 ) chr_count = 31;
+
+    // Convert ASCII string into UTF-16
+    for(uint8_t i=0; i<chr_count; i++)
+    {
+      _desc_str[1+i] = str[i];
+    }
+  }
+
+  // first byte is length (including header), second byte is string type
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
+
+  return _desc_str;
+}

Firmware/Core/tinyusb/examples/device/hid_composite/src/usb_descriptors.h

@@ -0,0 +1,37 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef USB_DESCRIPTORS_H_
+#define USB_DESCRIPTORS_H_
+
+enum
+{
+  REPORT_ID_KEYBOARD = 1,
+  REPORT_ID_MOUSE,
+  REPORT_ID_CONSUMER_CONTROL,
+  REPORT_ID_GAMEPAD,
+  REPORT_ID_COUNT
+};
+
+#endif /* USB_DESCRIPTORS_H_ */

Firmware/Core/tinyusb/examples/device/hid_composite_freertos/CMakeLists.txt

@@ -0,0 +1,17 @@
+cmake_minimum_required(VERSION 3.5)
+
+# use BOARD-Directory name for project id
+get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
+set(PROJECT ${BOARD}-${PROJECT})
+
+# TOP is absolute path to root directory of TinyUSB git repo
+set(TOP "../../..")
+get_filename_component(TOP "${TOP}" REALPATH)
+
+# Check for -DFAMILY=
+if(FAMILY MATCHES "^esp32s[2-3]")
+  include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
+  project(${PROJECT})
+else()
+  message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
+endif()

Firmware/Core/tinyusb/examples/device/hid_composite_freertos/Makefile

@@ -0,0 +1,48 @@
+DEPS_SUBMODULES += lib/FreeRTOS-Kernel
+
+include ../../../tools/top.mk
+include ../../make.mk
+
+FREERTOS_SRC = lib/FreeRTOS-Kernel
+FREERTOS_PORTABLE_SRC= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC)/$(FREERTOS_PORT)
+
+INC += \
+	src \
+	src/FreeRTOSConfig \
+	$(TOP)/hw \
+	$(TOP)/$(FREERTOS_SRC)/include \
+	$(TOP)/$(FREERTOS_PORTABLE_SRC)
+
+# Example source
+EXAMPLE_SOURCE = \
+	src/freertos_hook.c \
+	src/main.c \
+	src/usb_descriptors.c
+	
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+# FreeRTOS source, all files in port folder
+SRC_C += \
+	$(FREERTOS_SRC)/list.c \
+	$(FREERTOS_SRC)/queue.c \
+	$(FREERTOS_SRC)/tasks.c \
+	$(FREERTOS_SRC)/timers.c \
+	$(subst ../../../,,$(wildcard ../../../$(FREERTOS_PORTABLE_SRC)/*.c))
+
+SRC_S += \
+	$(subst ../../../,,$(wildcard ../../../$(FREERTOS_PORTABLE_SRC)/*.s))
+
+# include heap manage if configSUPPORT_DYNAMIC_ALLOCATION = 1
+# SRC_C += $(FREERTOS_SRC)/portable/MemMang/heap_1.c
+# CFLAGS += -Wno-error=sign-compare
+
+# Suppress FreeRTOSConfig.h warnings
+GCC_CFLAGS += -Wno-error=redundant-decls
+
+# Suppress FreeRTOS source warnings
+GCC_CFLAGS += -Wno-error=cast-qual
+
+# FreeRTOS (lto + Os) linker issue
+LDFLAGS += -Wl,--undefined=vTaskSwitchContext
+
+include ../../rules.mk

Firmware/Core/tinyusb/examples/device/hid_composite_freertos/sdkconfig.defaults

@@ -0,0 +1,3 @@
+CONFIG_IDF_CMAKE=y
+CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y
+CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y

Firmware/Core/tinyusb/examples/device/hid_composite_freertos/skip.txt

@@ -0,0 +1,12 @@
+mcu:CH32V307
+mcu:CXD56
+mcu:F1C100S
+mcu:GD32VF103
+mcu:MKL25ZXX
+mcu:MSP430x5xx
+mcu:RP2040
+mcu:SAMD11
+mcu:SAMX7X
+mcu:VALENTYUSB_EPTRI
+family:broadcom_32bit
+family:broadcom_64bit

Firmware/Core/tinyusb/examples/device/hid_composite_freertos/src/CMakeLists.txt

@@ -0,0 +1,35 @@
+idf_component_register(SRCS "main.c" "usb_descriptors.c"
+                    INCLUDE_DIRS "."
+                    REQUIRES freertos soc)
+
+file(TO_NATIVE_PATH "${TOP}/hw/bsp/${FAMILY}/boards/${BOARD}/board.cmake" board_cmake)
+
+if(EXISTS ${board_cmake})
+    include(${board_cmake})
+endif()
+
+target_include_directories(${COMPONENT_TARGET} PUBLIC
+  "${TOP}/hw"
+  "${TOP}/src"
+)
+
+target_compile_definitions(${COMPONENT_TARGET} PUBLIC
+  ESP_PLATFORM
+)
+
+target_sources(${COMPONENT_TARGET} PUBLIC
+  "${TOP}/src/tusb.c"
+  "${TOP}/src/common/tusb_fifo.c"
+  "${TOP}/src/device/usbd.c"
+  "${TOP}/src/device/usbd_control.c"
+  "${TOP}/src/class/cdc/cdc_device.c"
+  "${TOP}/src/class/dfu/dfu_rt_device.c"
+  "${TOP}/src/class/hid/hid_device.c"
+  "${TOP}/src/class/midi/midi_device.c"
+  "${TOP}/src/class/msc/msc_device.c"
+  "${TOP}/src/class/net/ecm_rndis_device.c"
+  "${TOP}/src/class/net/ncm_device.c"
+  "${TOP}/src/class/usbtmc/usbtmc_device.c"
+  "${TOP}/src/class/vendor/vendor_device.c"
+  "${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c"
+)

Firmware/Core/tinyusb/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h

@@ -0,0 +1,206 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+
+// Include MCU header
+#include "bsp/board_mcu.h"
+
+#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3
+  #error "ESP32-Sx should use IDF's FreeRTOSConfig.h"
+#endif
+
+// TODO fix later
+#if CFG_TUSB_MCU == OPT_MCU_MM32F327X
+  extern u32 SystemCoreClock;
+#else
+  // FIXME cause redundant-decls warnings
+  extern uint32_t SystemCoreClock;
+#endif
+
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU								        0
+#define configENABLE_FPU								        1
+#define configENABLE_TRUSTZONE					        0
+#define configMINIMAL_SECURE_STACK_SIZE					( 1024 )
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               2
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         1
+#define configSUPPORT_DYNAMIC_ALLOCATION        0
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      0
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+/* Define to trap errors during development. */
+// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
+#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
+  #define configASSERT(_exp) \
+    do {\
+      if ( !(_exp) ) { \
+        volatile uint32_t* ARM_CM_DHCSR =  ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
+        if ( (*ARM_CM_DHCSR) & 1UL ) {  /* Only halt mcu if debugger is attached */ \
+          taskDISABLE_INTERRUPTS(); \
+           __asm("BKPT #0\n"); \
+        }\
+      }\
+    } while(0)
+#else
+  #define configASSERT( x )
+#endif
+
+#ifdef __RX__
+/* Renesas RX series */
+#define vSoftwareInterruptISR					        INT_Excep_ICU_SWINT
+#define vTickISR								              INT_Excep_CMT0_CMI0
+#define configPERIPHERAL_CLOCK_HZ				      (configCPU_CLOCK_HZ/2)
+#define configKERNEL_INTERRUPT_PRIORITY			  1
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY	4
+
+#else
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+#if defined(__NVIC_PRIO_BITS)
+  // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h
+	#define configPRIO_BITS       __NVIC_PRIO_BITS
+
+#elif defined(__ECLIC_INTCTLBITS)
+  // RISC-V Bumblebee core from nuclei
+  #define configPRIO_BITS       __ECLIC_INTCTLBITS
+
+#elif defined(__IASMARM__)
+  // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS.
+  // Therefore we will hard coded it to minimum value of 2 to get pass ci build.
+  // IAR user must update this to correct value of the target MCU
+  #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU"
+  #define configPRIO_BITS       2
+
+#else
+  #error "FreeRTOS configPRIO_BITS to be defined"
+#endif
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
+
+#endif /* __FREERTOS_CONFIG__H */

Firmware/Core/tinyusb/examples/device/hid_composite_freertos/src/freertos_hook.c

@@ -0,0 +1,114 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+//--------------------------------------------------------------------+
+// INCLUDE
+//--------------------------------------------------------------------+
+#include "FreeRTOS.h"
+#include "task.h"
+#include "common/tusb_common.h"
+
+
+void vApplicationMallocFailedHook(void)
+{
+  taskDISABLE_INTERRUPTS();
+  TU_ASSERT(false, );
+}
+
+void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName)
+{
+  (void) pxTask;
+  (void) pcTaskName;
+
+  taskDISABLE_INTERRUPTS();
+  TU_ASSERT(false, );
+}
+
+/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an
+ * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is
+ * used by the Idle task. */
+void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize )
+{
+  /* If the buffers to be provided to the Idle task are declared inside this
+   * function then they must be declared static - otherwise they will be allocated on
+   * the stack and so not exists after this function exits. */
+  static StaticTask_t xIdleTaskTCB;
+  static StackType_t uxIdleTaskStack[ configMINIMAL_STACK_SIZE ];
+
+  /* Pass out a pointer to the StaticTask_t structure in which the Idle task's
+    state will be stored. */
+  *ppxIdleTaskTCBBuffer = &xIdleTaskTCB;
+
+  /* Pass out the array that will be used as the Idle task's stack. */
+  *ppxIdleTaskStackBuffer = uxIdleTaskStack;
+
+  /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer.
+    Note that, as the array is necessarily of type StackType_t,
+    configMINIMAL_STACK_SIZE is specified in words, not bytes. */
+  *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE;
+}
+
+/* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the
+ * application must provide an implementation of vApplicationGetTimerTaskMemory()
+ * to provide the memory that is used by the Timer service task. */
+void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize )
+{
+  /* If the buffers to be provided to the Timer task are declared inside this
+   * function then they must be declared static - otherwise they will be allocated on
+   * the stack and so not exists after this function exits. */
+  static StaticTask_t xTimerTaskTCB;
+  static StackType_t uxTimerTaskStack[ configTIMER_TASK_STACK_DEPTH ];
+
+  /* Pass out a pointer to the StaticTask_t structure in which the Timer
+    task's state will be stored. */
+  *ppxTimerTaskTCBBuffer = &xTimerTaskTCB;
+
+  /* Pass out the array that will be used as the Timer task's stack. */
+  *ppxTimerTaskStackBuffer = uxTimerTaskStack;
+
+  /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer.
+    Note that, as the array is necessarily of type StackType_t,
+    configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */
+  *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH;
+}
+
+#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X
+#include "iodefine.h"
+void vApplicationSetupTimerInterrupt(void)
+{
+  /* Enable CMT0 */
+  SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1);
+  MSTP(CMT0)       = 0;
+  SYSTEM.PRCR.WORD = (0xA5u<<8);
+
+  CMT0.CMCNT      = 0;
+  CMT0.CMCOR      = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128);
+  CMT0.CMCR.WORD  = TU_BIT(6) | 2;
+  IR(CMT0, CMI0)  = 0;
+  IPR(CMT0, CMI0) = configKERNEL_INTERRUPT_PRIORITY;
+  IEN(CMT0, CMI0) = 1;
+  CMT.CMSTR0.BIT.STR0 = 1;
+}
+#endif

Firmware/Core/tinyusb/examples/device/hid_composite_freertos/src/main.c

@@ -0,0 +1,375 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+#include "usb_descriptors.h"
+
+#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
+  // ESP-IDF need "freertos/" prefix in include path.
+  // CFG_TUSB_OS_INC_PATH should be defined accordingly.
+  #include "freertos/FreeRTOS.h"
+  #include "freertos/semphr.h"
+  #include "freertos/queue.h"
+  #include "freertos/task.h"
+  #include "freertos/timers.h"
+
+  #define USBD_STACK_SIZE     4096
+
+#else
+  #include "FreeRTOS.h"
+  #include "semphr.h"
+  #include "queue.h"
+  #include "task.h"
+  #include "timers.h"
+
+  // Increase stack size when debug log is enabled
+  #define USBD_STACK_SIZE    (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1)
+#endif
+
+#define HID_STACK_SZIE      configMINIMAL_STACK_SIZE
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+
+/* Blink pattern
+ * - 250 ms  : device not mounted
+ * - 1000 ms : device mounted
+ * - 2500 ms : device is suspended
+ */
+enum  {
+  BLINK_NOT_MOUNTED = 250,
+  BLINK_MOUNTED = 1000,
+  BLINK_SUSPENDED = 2500,
+};
+
+// static timer & task
+#if configSUPPORT_STATIC_ALLOCATION
+StaticTimer_t blinky_tmdef;
+
+StackType_t  usb_device_stack[USBD_STACK_SIZE];
+StaticTask_t usb_device_taskdef;
+
+StackType_t  hid_stack[HID_STACK_SZIE];
+StaticTask_t hid_taskdef;
+#endif
+
+TimerHandle_t blinky_tm;
+
+void led_blinky_cb(TimerHandle_t xTimer);
+void usb_device_task(void* param);
+void hid_task(void* params);
+
+//--------------------------------------------------------------------+
+// Main
+//--------------------------------------------------------------------+
+
+int main(void)
+{
+  board_init();
+
+#if configSUPPORT_STATIC_ALLOCATION
+  // soft timer for blinky
+  blinky_tm = xTimerCreateStatic(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb, &blinky_tmdef);
+
+  // Create a task for tinyusb device stack
+  xTaskCreateStatic(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_device_stack, &usb_device_taskdef);
+
+  // Create HID task
+  xTaskCreateStatic(hid_task, "hid", HID_STACK_SZIE, NULL, configMAX_PRIORITIES-2, hid_stack, &hid_taskdef);
+#else
+  blinky_tm = xTimerCreate(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb);
+  xTaskCreate(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, NULL);
+  xTaskCreate(hid_task, "hid", HID_STACK_SZIE, NULL, configMAX_PRIORITIES-2, NULL);
+#endif
+
+  xTimerStart(blinky_tm, 0);
+
+  // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
+#if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
+  vTaskStartScheduler();
+#endif
+
+  return 0;
+}
+
+#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
+void app_main(void)
+{
+  main();
+}
+#endif
+
+// USB Device Driver task
+// This top level thread process all usb events and invoke callbacks
+void usb_device_task(void* param)
+{
+  (void) param;
+
+  // init device stack on configured roothub port
+  // This should be called after scheduler/kernel is started.
+  // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API.
+  tud_init(BOARD_TUD_RHPORT);
+
+  // RTOS forever loop
+  while (1)
+  {
+    // put this thread to waiting state until there is new events
+    tud_task();
+
+    // following code only run if tud_task() process at least 1 event
+  }
+}
+
+//--------------------------------------------------------------------+
+// Device callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when device is mounted
+void tud_mount_cb(void)
+{
+  xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_MOUNTED), 0);
+}
+
+// Invoked when device is unmounted
+void tud_umount_cb(void)
+{
+  xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), 0);
+}
+
+// Invoked when usb bus is suspended
+// remote_wakeup_en : if host allow us  to perform remote wakeup
+// Within 7ms, device must draw an average of current less than 2.5 mA from bus
+void tud_suspend_cb(bool remote_wakeup_en)
+{
+  (void) remote_wakeup_en;
+  xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_SUSPENDED), 0);
+}
+
+// Invoked when usb bus is resumed
+void tud_resume_cb(void)
+{
+  xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_MOUNTED), 0);
+}
+
+//--------------------------------------------------------------------+
+// USB HID
+//--------------------------------------------------------------------+
+
+static void send_hid_report(uint8_t report_id, uint32_t btn)
+{
+  // skip if hid is not ready yet
+  if ( !tud_hid_ready() ) return;
+
+  switch(report_id)
+  {
+    case REPORT_ID_KEYBOARD:
+    {
+      // use to avoid send multiple consecutive zero report for keyboard
+      static bool has_keyboard_key = false;
+
+      if ( btn )
+      {
+        uint8_t keycode[6] = { 0 };
+        keycode[0] = HID_KEY_A;
+
+        tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, keycode);
+        has_keyboard_key = true;
+      }else
+      {
+        // send empty key report if previously has key pressed
+        if (has_keyboard_key) tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, NULL);
+        has_keyboard_key = false;
+      }
+    }
+    break;
+
+    case REPORT_ID_MOUSE:
+    {
+      int8_t const delta = 5;
+
+      // no button, right + down, no scroll, no pan
+      tud_hid_mouse_report(REPORT_ID_MOUSE, 0x00, delta, delta, 0, 0);
+    }
+    break;
+
+    case REPORT_ID_CONSUMER_CONTROL:
+    {
+      // use to avoid send multiple consecutive zero report
+      static bool has_consumer_key = false;
+
+      if ( btn )
+      {
+        // volume down
+        uint16_t volume_down = HID_USAGE_CONSUMER_VOLUME_DECREMENT;
+        tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &volume_down, 2);
+        has_consumer_key = true;
+      }else
+      {
+        // send empty key report (release key) if previously has key pressed
+        uint16_t empty_key = 0;
+        if (has_consumer_key) tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &empty_key, 2);
+        has_consumer_key = false;
+      }
+    }
+    break;
+
+    case REPORT_ID_GAMEPAD:
+    {
+      // use to avoid send multiple consecutive zero report for keyboard
+      static bool has_gamepad_key = false;
+
+      hid_gamepad_report_t report =
+      {
+        .x   = 0, .y = 0, .z = 0, .rz = 0, .rx = 0, .ry = 0,
+        .hat = 0, .buttons = 0
+      };
+
+      if ( btn )
+      {
+        report.hat = GAMEPAD_HAT_UP;
+        report.buttons = GAMEPAD_BUTTON_A;
+        tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report));
+
+        has_gamepad_key = true;
+      }else
+      {
+        report.hat = GAMEPAD_HAT_CENTERED;
+        report.buttons = 0;
+        if (has_gamepad_key) tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report));
+        has_gamepad_key = false;
+      }
+    }
+    break;
+
+    default: break;
+  }
+}
+
+void hid_task(void* param)
+{
+  (void) param;
+
+  while(1)
+  {
+    // Poll every 10ms
+    vTaskDelay(pdMS_TO_TICKS(10));
+
+    uint32_t const btn = board_button_read();
+
+    // Remote wakeup
+    if ( tud_suspended() && btn )
+    {
+      // Wake up host if we are in suspend mode
+      // and REMOTE_WAKEUP feature is enabled by host
+      tud_remote_wakeup();
+    }
+    else
+    {
+      // Send the 1st of report chain, the rest will be sent by tud_hid_report_complete_cb()
+      send_hid_report(REPORT_ID_KEYBOARD, btn);
+    }
+  }
+}
+
+// Invoked when sent REPORT successfully to host
+// Application can use this to send the next report
+// Note: For composite reports, report[0] is report ID
+void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len)
+{
+  (void) instance;
+  (void) len;
+
+  uint8_t next_report_id = report[0] + 1;
+
+  if (next_report_id < REPORT_ID_COUNT)
+  {
+    send_hid_report(next_report_id, board_button_read());
+  }
+}
+
+
+// Invoked when received GET_REPORT control request
+// Application must fill buffer report's content and return its length.
+// Return zero will cause the stack to STALL request
+uint16_t tud_hid_get_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen)
+{
+  // TODO not Implemented
+  (void) instance;
+  (void) report_id;
+  (void) report_type;
+  (void) buffer;
+  (void) reqlen;
+
+  return 0;
+}
+
+// Invoked when received SET_REPORT control request or
+// received data on OUT endpoint ( Report ID = 0, Type = 0 )
+void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize)
+{
+  (void) instance;
+
+  if (report_type == HID_REPORT_TYPE_OUTPUT)
+  {
+    // Set keyboard LED e.g Capslock, Numlock etc...
+    if (report_id == REPORT_ID_KEYBOARD)
+    {
+      // bufsize should be (at least) 1
+      if ( bufsize < 1 ) return;
+
+      uint8_t const kbd_leds = buffer[0];
+
+      if (kbd_leds & KEYBOARD_LED_CAPSLOCK)
+      {
+        // Capslock On: disable blink, turn led on
+        xTimerStop(blinky_tm, portMAX_DELAY);
+        board_led_write(true);
+      }else
+      {
+        // Caplocks Off: back to normal blink
+        board_led_write(false);
+        xTimerStart(blinky_tm, portMAX_DELAY);
+      }
+    }
+  }
+}
+
+//--------------------------------------------------------------------+
+// BLINKING TASK
+//--------------------------------------------------------------------+
+void led_blinky_cb(TimerHandle_t xTimer)
+{
+  (void) xTimer;
+  static bool led_state = false;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}

Firmware/Core/tinyusb/examples/device/hid_composite_freertos/src/tusb_config.h

@@ -0,0 +1,112 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT     0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by board.mk
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
+#endif
+
+// This examples use FreeRTOS
+#define CFG_TUSB_OS           OPT_OS_FREERTOS
+
+// Espressif IDF requires "freertos/" prefix in include path
+#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
+#define CFG_TUSB_OS_INC_PATH  freertos/
+#endif
+
+// can be defined by compiler in DEBUG build
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE    64
+#endif
+
+//------------- CLASS -------------//
+#define CFG_TUD_HID               1
+#define CFG_TUD_CDC               0
+#define CFG_TUD_MSC               0
+#define CFG_TUD_MIDI              0
+#define CFG_TUD_VENDOR            0
+
+// HID buffer size Should be sufficient to hold ID (if any) + Data
+#define CFG_TUD_HID_EP_BUFSIZE    16
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */

Firmware/Core/tinyusb/examples/device/hid_composite_freertos/src/usb_descriptors.c

@@ -0,0 +1,225 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "tusb.h"
+#include "usb_descriptors.h"
+
+/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
+ * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
+ *
+ * Auto ProductID layout's Bitmap:
+ *   [MSB]         HID | MSC | CDC          [LSB]
+ */
+#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
+#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
+                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
+
+#define USB_VID   0xCafe
+#define USB_BCD   0x0200
+
+//--------------------------------------------------------------------+
+// Device Descriptors
+//--------------------------------------------------------------------+
+tusb_desc_device_t const desc_device =
+{
+    .bLength            = sizeof(tusb_desc_device_t),
+    .bDescriptorType    = TUSB_DESC_DEVICE,
+    .bcdUSB             = USB_BCD,
+    .bDeviceClass       = 0x00,
+    .bDeviceSubClass    = 0x00,
+    .bDeviceProtocol    = 0x00,
+    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+
+    .idVendor           = USB_VID,
+    .idProduct          = USB_PID,
+    .bcdDevice          = 0x0100,
+
+    .iManufacturer      = 0x01,
+    .iProduct           = 0x02,
+    .iSerialNumber      = 0x03,
+
+    .bNumConfigurations = 0x01
+};
+
+// Invoked when received GET DEVICE DESCRIPTOR
+// Application return pointer to descriptor
+uint8_t const * tud_descriptor_device_cb(void)
+{
+  return (uint8_t const *) &desc_device;
+}
+
+//--------------------------------------------------------------------+
+// HID Report Descriptor
+//--------------------------------------------------------------------+
+
+uint8_t const desc_hid_report[] =
+{
+  TUD_HID_REPORT_DESC_KEYBOARD( HID_REPORT_ID(REPORT_ID_KEYBOARD         )),
+  TUD_HID_REPORT_DESC_MOUSE   ( HID_REPORT_ID(REPORT_ID_MOUSE            )),
+  TUD_HID_REPORT_DESC_CONSUMER( HID_REPORT_ID(REPORT_ID_CONSUMER_CONTROL )),
+  TUD_HID_REPORT_DESC_GAMEPAD ( HID_REPORT_ID(REPORT_ID_GAMEPAD          ))
+};
+
+// Invoked when received GET HID REPORT DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_hid_descriptor_report_cb(uint8_t instance)
+{
+  (void) instance;
+  return desc_hid_report;
+}
+
+//--------------------------------------------------------------------+
+// Configuration Descriptor
+//--------------------------------------------------------------------+
+
+enum
+{
+  ITF_NUM_HID,
+  ITF_NUM_TOTAL
+};
+
+#define  CONFIG_TOTAL_LEN  (TUD_CONFIG_DESC_LEN + TUD_HID_DESC_LEN)
+
+#define EPNUM_HID   0x81
+
+uint8_t const desc_configuration[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
+
+  // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval
+  TUD_HID_DESCRIPTOR(ITF_NUM_HID, 0, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_HID, CFG_TUD_HID_EP_BUFSIZE, 5)
+};
+
+#if TUD_OPT_HIGH_SPEED
+// Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration
+
+// other speed configuration
+uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN];
+
+// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed
+tusb_desc_device_qualifier_t const desc_device_qualifier =
+{
+  .bLength            = sizeof(tusb_desc_device_qualifier_t),
+  .bDescriptorType    = TUSB_DESC_DEVICE_QUALIFIER,
+  .bcdUSB             = USB_BCD,
+
+  .bDeviceClass       = 0x00,
+  .bDeviceSubClass    = 0x00,
+  .bDeviceProtocol    = 0x00,
+
+  .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+  .bNumConfigurations = 0x01,
+  .bReserved          = 0x00
+};
+
+// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete.
+// device_qualifier descriptor describes information about a high-speed capable device that would
+// change if the device were operating at the other speed. If not highspeed capable stall this request.
+uint8_t const* tud_descriptor_device_qualifier_cb(void)
+{
+  return (uint8_t const*) &desc_device_qualifier;
+}
+
+// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa
+uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+
+  // other speed config is basically configuration with type = OHER_SPEED_CONFIG
+  memcpy(desc_other_speed_config, desc_configuration, CONFIG_TOTAL_LEN);
+  desc_other_speed_config[1] = TUSB_DESC_OTHER_SPEED_CONFIG;
+
+  // this example use the same configuration for both high and full speed mode
+  return desc_other_speed_config;
+}
+
+#endif // highspeed
+
+// Invoked when received GET CONFIGURATION DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+  return desc_configuration;
+}
+
+//--------------------------------------------------------------------+
+// String Descriptors
+//--------------------------------------------------------------------+
+
+// array of pointer to string descriptors
+char const* string_desc_arr [] =
+{
+  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
+  "TinyUSB",                     // 1: Manufacturer
+  "TinyUSB Device",              // 2: Product
+  "123456",                      // 3: Serials, should use chip ID
+};
+
+static uint16_t _desc_str[32];
+
+// Invoked when received GET STRING DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
+{
+  (void) langid;
+
+  uint8_t chr_count;
+
+  if ( index == 0)
+  {
+    memcpy(&_desc_str[1], string_desc_arr[0], 2);
+    chr_count = 1;
+  }else
+  {
+    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
+    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
+
+    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
+
+    const char* str = string_desc_arr[index];
+
+    // Cap at max char
+    chr_count = (uint8_t) strlen(str);
+    if ( chr_count > 31 ) chr_count = 31;
+
+    // Convert ASCII string into UTF-16
+    for(uint8_t i=0; i<chr_count; i++)
+    {
+      _desc_str[1+i] = str[i];
+    }
+  }
+
+  // first byte is length (including header), second byte is string type
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
+
+  return _desc_str;
+}

Firmware/Core/tinyusb/examples/device/hid_composite_freertos/src/usb_descriptors.h

@@ -0,0 +1,37 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef USB_DESCRIPTORS_H_
+#define USB_DESCRIPTORS_H_
+
+enum
+{
+  REPORT_ID_KEYBOARD = 1,
+  REPORT_ID_MOUSE,
+  REPORT_ID_CONSUMER_CONTROL,
+  REPORT_ID_GAMEPAD,
+  REPORT_ID_COUNT
+};
+
+#endif /* USB_DESCRIPTORS_H_ */

Firmware/Core/tinyusb/examples/device/hid_generic_inout/CMakeLists.txt

@@ -0,0 +1,28 @@
+cmake_minimum_required(VERSION 3.5)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT})
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
+        )
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src
+        )
+
+# Configure compilation flags and libraries for the example... see the corresponding function
+# in hw/bsp/FAMILY/family.cmake for details.
+family_configure_device_example(${PROJECT})

Firmware/Core/tinyusb/examples/device/hid_generic_inout/Makefile

@@ -0,0 +1,12 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+INC += \
+	src \
+	$(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE += $(wildcard src/*.c)
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+include ../../rules.mk

Firmware/Core/tinyusb/examples/device/hid_generic_inout/boards.js

@@ -0,0 +1,4 @@
+module.exports = {
+	"Adafruit Boards":[0x239A,0xFFFF],
+	"TinyUSB example":[0xCAFE,0xFFFF]
+}

Firmware/Core/tinyusb/examples/device/hid_generic_inout/hid_test.js

@@ -0,0 +1,68 @@
+// IMPORTANT: install the dependency via 'npm i node-hid' in the same location as the script
+// If the install fails on windows you may need to run 'npm i -g windows-build-tools' first to be able to compile native code needed for this library
+
+var HID = require('node-hid');
+var os = require('os')
+// list of supported devices
+var boards = require('./boards.js')
+var devices = HID.devices();
+
+// this will choose any device found in the boards.js file
+var deviceInfo = devices.find(anySupportedBoard);
+var reportLen = 64;
+
+var message = "Hello World!"
+
+// Turn our string into an array of integers e.g. 'ascii codes', though charCodeAt spits out UTF-16
+// This means if you have characters in your string that are not Latin-1 you will have to add additional logic for character codes above 255
+var messageBuffer = Array.from(message, function(c){return c.charCodeAt(0)});
+
+// HIDAPI requires us to prepend a 0 for single hid report as dummy reportID
+messageBuffer.unshift(0)
+
+// Some OSes expect that you always send a buffer that equals your report length
+// So lets fill up the rest of the buffer with zeros
+var paddingBuf = Array(reportLen-messageBuffer.length);
+paddingBuf.fill(0)
+messageBuffer = messageBuffer.concat(paddingBuf)
+
+// check if we actually found a device and if so send our messageBuffer to it
+if( deviceInfo ) {
+	console.log(deviceInfo)
+	var device = new HID.HID( deviceInfo.path );
+
+	// register an event listener for data coming from the device
+	device.on("data", function(data) {
+		// Print what we get from the device
+		console.log(data.toString('ascii'));
+	});
+
+	// the same for any error that occur
+	device.on("error", function(err) {console.log(err)});
+
+	// send our message to the device every 500ms
+	setInterval(function () {
+		device.write(messageBuffer);
+	},500)
+}
+
+
+function anySupportedBoard(d) {
+	
+	for (var key in boards) {
+	    if (boards.hasOwnProperty(key)) {
+	        if (isDevice(boards[key],d)) {
+	        	console.log("Found " + d.product);
+	        	return true;
+	        }
+	    }
+	}
+	return false;
+}
+
+
+function isDevice(board,d){
+	// product id 0xff is matches all
+	return d.vendorId==board[0] && (d.productId==board[1] || board[1] == 0xFFFF);
+}
+

Firmware/Core/tinyusb/examples/device/hid_generic_inout/hid_test.py

@@ -0,0 +1,22 @@
+# Install python3 HID package https://pypi.org/project/hid/
+import hid
+
+# default is TinyUSB (0xcafe), Adafruit (0x239a), RaspberryPi (0x2e8a), Espressif (0x303a) VID
+USB_VID = (0xcafe, 0x239a, 0x2e8a, 0x303a)
+
+print("VID list: " + ", ".join('%02x' % v for v in USB_VID))
+
+for vid in  USB_VID:
+    for dict in hid.enumerate(vid):
+        print(dict)
+        dev = hid.Device(dict['vendor_id'], dict['product_id'])
+        if dev:
+            while True:
+                # Get input from console and encode to UTF8 for array of chars.
+                # hid generic in/out is single report therefore by HIDAPI requirement
+                # it must be preceded, with 0x00 as dummy reportID
+                str_out = b'\x00'
+                str_out += input("Send text to HID Device : ").encode('utf-8')
+                dev.write(str_out)
+                str_in = dev.read(64)
+                print("Received from HID Device:", str_in, '\n')

Firmware/Core/tinyusb/examples/device/hid_generic_inout/src/main.c

@@ -0,0 +1,172 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+/* This example demonstrate HID Generic raw Input & Output.
+ * It will receive data from Host (In endpoint) and echo back (Out endpoint).
+ * HID Report descriptor use vendor for usage page (using template TUD_HID_REPORT_DESC_GENERIC_INOUT)
+ *
+ * There are 2 ways to test the sketch
+ * 1. Using nodejs
+ * - Install nodejs and npm to your PC
+ *
+ * - Install excellent node-hid (https://github.com/node-hid/node-hid) by
+ *   $ npm install node-hid
+ *
+ * - Run provided hid test script
+ *   $ node hid_test.js
+ *
+ * 2. Using python
+ * - Install `hid` package (https://pypi.org/project/hid/) by
+ *   $ pip install hid
+ *
+ * - hid package replies on hidapi (https://github.com/libusb/hidapi) for backend,
+ *   which already available in Linux. However on windows, you may need to download its dlls from their release page and
+ *   copy it over to folder where python is installed.
+ *
+ * - Run provided hid test script to send and receive data to this device.
+ *   $ python3 hid_test.py
+ */
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+
+/* Blink pattern
+ * - 250 ms  : device not mounted
+ * - 1000 ms : device mounted
+ * - 2500 ms : device is suspended
+ */
+enum  {
+  BLINK_NOT_MOUNTED = 250,
+  BLINK_MOUNTED = 1000,
+  BLINK_SUSPENDED = 2500,
+};
+
+static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
+
+void led_blinking_task(void);
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+  board_init();
+
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
+
+  while (1)
+  {
+    tud_task(); // tinyusb device task
+    led_blinking_task();
+  }
+
+  return 0;
+}
+
+//--------------------------------------------------------------------+
+// Device callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when device is mounted
+void tud_mount_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+// Invoked when device is unmounted
+void tud_umount_cb(void)
+{
+  blink_interval_ms = BLINK_NOT_MOUNTED;
+}
+
+// Invoked when usb bus is suspended
+// remote_wakeup_en : if host allow us  to perform remote wakeup
+// Within 7ms, device must draw an average of current less than 2.5 mA from bus
+void tud_suspend_cb(bool remote_wakeup_en)
+{
+  (void) remote_wakeup_en;
+  blink_interval_ms = BLINK_SUSPENDED;
+}
+
+// Invoked when usb bus is resumed
+void tud_resume_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+//--------------------------------------------------------------------+
+// USB HID
+//--------------------------------------------------------------------+
+
+// Invoked when received GET_REPORT control request
+// Application must fill buffer report's content and return its length.
+// Return zero will cause the stack to STALL request
+uint16_t tud_hid_get_report_cb(uint8_t itf, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen)
+{
+  // TODO not Implemented
+  (void) itf;
+  (void) report_id;
+  (void) report_type;
+  (void) buffer;
+  (void) reqlen;
+
+  return 0;
+}
+
+// Invoked when received SET_REPORT control request or
+// received data on OUT endpoint ( Report ID = 0, Type = 0 )
+void tud_hid_set_report_cb(uint8_t itf, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize)
+{
+  // This example doesn't use multiple report and report ID
+  (void) itf;
+  (void) report_id;
+  (void) report_type;
+
+  // echo back anything we received from host
+  tud_hid_report(0, buffer, bufsize);
+}
+
+//--------------------------------------------------------------------+
+// BLINKING TASK
+//--------------------------------------------------------------------+
+void led_blinking_task(void)
+{
+  static uint32_t start_ms = 0;
+  static bool led_state = false;
+
+  // Blink every interval ms
+  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
+  start_ms += blink_interval_ms;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}

Firmware/Core/tinyusb/examples/device/hid_generic_inout/src/tusb_config.h

@@ -0,0 +1,107 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS           OPT_OS_NONE
+#endif
+
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE    64
+#endif
+
+//------------- CLASS -------------//
+#define CFG_TUD_CDC               0
+#define CFG_TUD_MSC               0
+#define CFG_TUD_HID               1
+#define CFG_TUD_MIDI              0
+#define CFG_TUD_VENDOR            0
+
+// HID buffer size Should be sufficient to hold ID (if any) + Data
+#define CFG_TUD_HID_EP_BUFSIZE    64
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */

Firmware/Core/tinyusb/examples/device/hid_generic_inout/src/usb_descriptors.c

@@ -0,0 +1,170 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "tusb.h"
+
+/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
+ * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
+ *
+ * Auto ProductID layout's Bitmap:
+ *   [MSB]         HID | MSC | CDC          [LSB]
+ */
+#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
+#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
+                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
+
+//--------------------------------------------------------------------+
+// Device Descriptors
+//--------------------------------------------------------------------+
+tusb_desc_device_t const desc_device =
+{
+    .bLength            = sizeof(tusb_desc_device_t),
+    .bDescriptorType    = TUSB_DESC_DEVICE,
+    .bcdUSB             = 0x0200,
+    .bDeviceClass       = 0x00,
+    .bDeviceSubClass    = 0x00,
+    .bDeviceProtocol    = 0x00,
+    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+
+    .idVendor           = 0xCafe,
+    .idProduct          = USB_PID,
+    .bcdDevice          = 0x0100,
+
+    .iManufacturer      = 0x01,
+    .iProduct           = 0x02,
+    .iSerialNumber      = 0x03,
+
+    .bNumConfigurations = 0x01
+};
+
+// Invoked when received GET DEVICE DESCRIPTOR
+// Application return pointer to descriptor
+uint8_t const * tud_descriptor_device_cb(void)
+{
+  return (uint8_t const *) &desc_device;
+}
+
+//--------------------------------------------------------------------+
+// HID Report Descriptor
+//--------------------------------------------------------------------+
+
+uint8_t const desc_hid_report[] =
+{
+  TUD_HID_REPORT_DESC_GENERIC_INOUT(CFG_TUD_HID_EP_BUFSIZE)
+};
+
+// Invoked when received GET HID REPORT DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_hid_descriptor_report_cb(uint8_t itf)
+{
+  (void) itf;
+  return desc_hid_report;
+}
+
+//--------------------------------------------------------------------+
+// Configuration Descriptor
+//--------------------------------------------------------------------+
+
+enum
+{
+  ITF_NUM_HID,
+  ITF_NUM_TOTAL
+};
+
+#define  CONFIG_TOTAL_LEN  (TUD_CONFIG_DESC_LEN + TUD_HID_INOUT_DESC_LEN)
+
+#define EPNUM_HID   0x01
+
+uint8_t const desc_configuration[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
+
+  // Interface number, string index, protocol, report descriptor len, EP Out & In address, size & polling interval
+  TUD_HID_INOUT_DESCRIPTOR(ITF_NUM_HID, 0, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_HID, 0x80 | EPNUM_HID, CFG_TUD_HID_EP_BUFSIZE, 10)
+};
+
+// Invoked when received GET CONFIGURATION DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+  return desc_configuration;
+}
+
+//--------------------------------------------------------------------+
+// String Descriptors
+//--------------------------------------------------------------------+
+
+// array of pointer to string descriptors
+char const* string_desc_arr [] =
+{
+  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
+  "TinyUSB",                     // 1: Manufacturer
+  "TinyUSB Device",              // 2: Product
+  "123456",                      // 3: Serials, should use chip ID
+};
+
+static uint16_t _desc_str[32];
+
+// Invoked when received GET STRING DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
+{
+  (void) langid;
+
+  uint8_t chr_count;
+
+  if ( index == 0)
+  {
+    memcpy(&_desc_str[1], string_desc_arr[0], 2);
+    chr_count = 1;
+  }else
+  {
+    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
+    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
+
+    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
+
+    const char* str = string_desc_arr[index];
+
+    // Cap at max char
+    chr_count = (uint8_t) strlen(str);
+    if ( chr_count > 31 ) chr_count = 31;
+
+    // Convert ASCII string into UTF-16
+    for(uint8_t i=0; i<chr_count; i++)
+    {
+      _desc_str[1+i] = str[i];
+    }
+  }
+
+  // first byte is length (including header), second byte is string type
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
+
+  return _desc_str;
+}

Firmware/Core/tinyusb/examples/device/hid_multiple_interface/CMakeLists.txt

@@ -0,0 +1,28 @@
+cmake_minimum_required(VERSION 3.5)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT})
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
+        )
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src
+        )
+
+# Configure compilation flags and libraries for the example... see the corresponding function
+# in hw/bsp/FAMILY/family.cmake for details.
+family_configure_device_example(${PROJECT})

Firmware/Core/tinyusb/examples/device/hid_multiple_interface/Makefile

@@ -0,0 +1,12 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+INC += \
+	src \
+	$(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE += $(wildcard src/*.c)
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+include ../../rules.mk

Firmware/Core/tinyusb/examples/device/hid_multiple_interface/src/main.c

@@ -0,0 +1,209 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+
+// Interface index depends on the order in configuration descriptor
+enum {
+  ITF_KEYBOARD = 0,
+  ITF_MOUSE = 1
+};
+
+/* Blink pattern
+ * - 250 ms  : device not mounted
+ * - 1000 ms : device mounted
+ * - 2500 ms : device is suspended
+ */
+enum  {
+  BLINK_NOT_MOUNTED = 250,
+  BLINK_MOUNTED = 1000,
+  BLINK_SUSPENDED = 2500,
+};
+
+static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
+
+void led_blinking_task(void);
+void hid_task(void);
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+  board_init();
+
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
+
+  while (1)
+  {
+    tud_task(); // tinyusb device task
+    led_blinking_task();
+
+    hid_task();
+  }
+
+  return 0;
+}
+
+//--------------------------------------------------------------------+
+// Device callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when device is mounted
+void tud_mount_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+// Invoked when device is unmounted
+void tud_umount_cb(void)
+{
+  blink_interval_ms = BLINK_NOT_MOUNTED;
+}
+
+// Invoked when usb bus is suspended
+// remote_wakeup_en : if host allow us  to perform remote wakeup
+// Within 7ms, device must draw an average of current less than 2.5 mA from bus
+void tud_suspend_cb(bool remote_wakeup_en)
+{
+  (void) remote_wakeup_en;
+  blink_interval_ms = BLINK_SUSPENDED;
+}
+
+// Invoked when usb bus is resumed
+void tud_resume_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+//--------------------------------------------------------------------+
+// USB HID
+//--------------------------------------------------------------------+
+
+void hid_task(void)
+{
+  // Poll every 10ms
+  const uint32_t interval_ms = 10;
+  static uint32_t start_ms = 0;
+
+  if ( board_millis() - start_ms < interval_ms) return; // not enough time
+  start_ms += interval_ms;
+
+  uint32_t const btn = board_button_read();
+
+  // Remote wakeup
+  if ( tud_suspended() && btn )
+  {
+    // Wake up host if we are in suspend mode
+    // and REMOTE_WAKEUP feature is enabled by host
+    tud_remote_wakeup();
+  }
+
+  /*------------- Keyboard -------------*/
+  if ( tud_hid_n_ready(ITF_KEYBOARD) )
+  {
+    // use to avoid send multiple consecutive zero report for keyboard
+    static bool has_key = false;
+
+    if ( btn )
+    {
+      uint8_t keycode[6] = { 0 };
+      keycode[0] = HID_KEY_A;
+
+      tud_hid_n_keyboard_report(ITF_KEYBOARD, 0, 0, keycode);
+
+      has_key = true;
+    }else
+    {
+      // send empty key report if previously has key pressed
+      if (has_key) tud_hid_n_keyboard_report(ITF_KEYBOARD, 0, 0, NULL);
+      has_key = false;
+    }
+  }
+
+  /*------------- Mouse -------------*/
+  if ( tud_hid_n_ready(ITF_MOUSE) )
+  {
+    if ( btn )
+    {
+      int8_t const delta = 5;
+
+      // no button, right + down, no scroll pan
+      tud_hid_n_mouse_report(ITF_MOUSE, 0, 0x00, delta, delta, 0, 0);
+    }
+  }
+}
+
+
+// Invoked when received GET_REPORT control request
+// Application must fill buffer report's content and return its length.
+// Return zero will cause the stack to STALL request
+uint16_t tud_hid_get_report_cb(uint8_t itf, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen)
+{
+  // TODO not Implemented
+  (void) itf;
+  (void) report_id;
+  (void) report_type;
+  (void) buffer;
+  (void) reqlen;
+
+  return 0;
+}
+
+// Invoked when received SET_REPORT control request or
+// received data on OUT endpoint ( Report ID = 0, Type = 0 )
+void tud_hid_set_report_cb(uint8_t itf, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize)
+{
+  // TODO set LED based on CAPLOCK, NUMLOCK etc...
+  (void) itf;
+  (void) report_id;
+  (void) report_type;
+  (void) buffer;
+  (void) bufsize;
+}
+
+//--------------------------------------------------------------------+
+// BLINKING TASK
+//--------------------------------------------------------------------+
+void led_blinking_task(void)
+{
+  static uint32_t start_ms = 0;
+  static bool led_state = false;
+
+  // Blink every interval ms
+  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
+  start_ms += blink_interval_ms;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}

Firmware/Core/tinyusb/examples/device/hid_multiple_interface/src/tusb_config.h

@@ -0,0 +1,107 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS           OPT_OS_NONE
+#endif
+
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE    64
+#endif
+
+//------------- CLASS -------------//
+#define CFG_TUD_HID               2
+#define CFG_TUD_CDC               0
+#define CFG_TUD_MSC               0
+#define CFG_TUD_MIDI              0
+#define CFG_TUD_VENDOR            0
+
+// HID buffer size Should be sufficient to hold ID (if any) + Data
+#define CFG_TUD_HID_EP_BUFSIZE    8
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */

Firmware/Core/tinyusb/examples/device/hid_multiple_interface/src/usb_descriptors.c

@@ -0,0 +1,188 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "tusb.h"
+
+/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
+ * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
+ *
+ * Auto ProductID layout's Bitmap:
+ *   [MSB]         HID | MSC | CDC          [LSB]
+ */
+#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
+#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
+                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
+
+//--------------------------------------------------------------------+
+// Device Descriptors
+//--------------------------------------------------------------------+
+tusb_desc_device_t const desc_device =
+{
+    .bLength            = sizeof(tusb_desc_device_t),
+    .bDescriptorType    = TUSB_DESC_DEVICE,
+    .bcdUSB             = 0x0200,
+    .bDeviceClass       = 0x00,
+    .bDeviceSubClass    = 0x00,
+    .bDeviceProtocol    = 0x00,
+    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+
+    .idVendor           = 0xCafe,
+    .idProduct          = USB_PID,
+    .bcdDevice          = 0x0100,
+
+    .iManufacturer      = 0x01,
+    .iProduct           = 0x02,
+    .iSerialNumber      = 0x03,
+
+    .bNumConfigurations = 0x01
+};
+
+// Invoked when received GET DEVICE DESCRIPTOR
+// Application return pointer to descriptor
+uint8_t const * tud_descriptor_device_cb(void)
+{
+  return (uint8_t const *) &desc_device;
+}
+
+//--------------------------------------------------------------------+
+// HID Report Descriptor
+//--------------------------------------------------------------------+
+
+uint8_t const desc_hid_report1[] =
+{
+  TUD_HID_REPORT_DESC_KEYBOARD()
+};
+
+uint8_t const desc_hid_report2[] =
+{
+  TUD_HID_REPORT_DESC_MOUSE()
+};
+
+// Invoked when received GET HID REPORT DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_hid_descriptor_report_cb(uint8_t itf)
+{
+  if (itf == 0)
+  {
+    return desc_hid_report1;
+  }
+  else if (itf == 1)
+  {
+    return desc_hid_report2;
+  }
+
+  return NULL;
+}
+
+//--------------------------------------------------------------------+
+// Configuration Descriptor
+//--------------------------------------------------------------------+
+
+enum
+{
+  ITF_NUM_HID1,
+  ITF_NUM_HID2,
+  ITF_NUM_TOTAL
+};
+
+#define  CONFIG_TOTAL_LEN  (TUD_CONFIG_DESC_LEN + TUD_HID_DESC_LEN + TUD_HID_DESC_LEN)
+
+#define EPNUM_HID1   0x81
+#define EPNUM_HID2   0x82
+
+uint8_t const desc_configuration[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
+
+  // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval
+  TUD_HID_DESCRIPTOR(ITF_NUM_HID1, 4, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report1), EPNUM_HID1, CFG_TUD_HID_EP_BUFSIZE, 10),
+  TUD_HID_DESCRIPTOR(ITF_NUM_HID2, 5, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report2), EPNUM_HID2, CFG_TUD_HID_EP_BUFSIZE, 10)
+};
+
+// Invoked when received GET CONFIGURATION DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+  return desc_configuration;
+}
+
+//--------------------------------------------------------------------+
+// String Descriptors
+//--------------------------------------------------------------------+
+
+// array of pointer to string descriptors
+char const* string_desc_arr [] =
+{
+  (const char[]) { 0x09, 0x04 },  // 0: is supported language is English (0x0409)
+  "TinyUSB",                      // 1: Manufacturer
+  "TinyUSB Device",               // 2: Product
+  "123456",                       // 3: Serials, should use chip ID
+  "Keyboard Interface",           // 4: Interface 1 String
+  "Mouse Interface",              // 5: Interface 2 String
+};
+
+static uint16_t _desc_str[32];
+
+// Invoked when received GET STRING DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
+{
+  (void) langid;
+
+  uint8_t chr_count;
+
+  if ( index == 0)
+  {
+    memcpy(&_desc_str[1], string_desc_arr[0], 2);
+    chr_count = 1;
+  }else
+  {
+    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
+    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
+
+    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
+
+    const char* str = string_desc_arr[index];
+
+    // Cap at max char
+    chr_count = (uint8_t) strlen(str);
+    if ( chr_count > 31 ) chr_count = 31;
+
+    // Convert ASCII string into UTF-16
+    for(uint8_t i=0; i<chr_count; i++)
+    {
+      _desc_str[1+i] = str[i];
+    }
+  }
+
+  // first byte is length (including header), second byte is string type
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
+
+  return _desc_str;
+}

Firmware/Core/tinyusb/examples/device/midi_test/CMakeLists.txt

@@ -0,0 +1,28 @@
+cmake_minimum_required(VERSION 3.5)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT})
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
+        )
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src
+        )
+
+# Configure compilation flags and libraries for the example... see the corresponding function
+# in hw/bsp/FAMILY/family.cmake for details.
+family_configure_device_example(${PROJECT})